

- Size
- 236.4 × 229 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 161
- Nets
- 190
- Pads
- 550
- Tracks, vias
- 696, 32
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 1 Aug 2024
- Updated
- 2 Oct 2026
Overview
M01 is an open-source printed circuit board by jvegaf, from the jvegaf/R3M1XXX repository on GitHub. It is a 2-layer board of 236.4 × 229 mm with 161 parts on 190 nets, routed with 696 tracks and 32 vias.
It is built around the 74HC595 and CD74HC4067M. Its parts include 54 resistors, 49 diodes, 10 ICs, 8 connectors and 5 capacitors.
Main components
274HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift RegistersCD74HC4067M
SOIC-24-300mil-55℃~+125℃ 16 160Ω 16:1 22ns 2V~6V 345ns 365ns 89MHz Bidirectional analog channel、Glitch-free switching SOIC-24-300mil Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
Parts
161| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12, H13, H14, H15 |
| 15 | VUMLD | LED_THT:LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15 |
| 15 | VUMLR | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15 |
| 15 | VUMRD | LED_THT:LED_D3.0mm | D16, D17, D18, D19, D20, D21, D22, D23, D24, D25, D26, D27, D28, D29, D30 |
| 15 | VUMRR | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30 |
| 13 | R_Pot | Potentiometer_THT:Potentiometer_Bourns_PTV09A-1_Single_Vertical | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8, RV9, RV10, RV11, RV12, RV13 |
| 7 | VUCH1 | LED_THT:LED_D3.0mm | D34, D35, D36, D37, D38, D39, D40 |
| 7 | VUCH1L | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R37, R38, R39, R40, R41, R42, R43 |
| 7 | VUCH2 | LED_THT:LED_D3.0mm | D42, D43, D44, D45, D46, D47, D48 |
| 7 | VUCH2R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R45, R46, R47, R48, R49, R50, R51 |
| 6 | 74HC595 | Package_SO:SOIC-16W_5.3x10.2mm_P1.27mm | U1, U2, U3, U4, U7, U8 |
| 5 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R31, R32, R36, R52, R53 |
| 5 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C4, C5 |
| 5 | SW | Button_Switch_THT:SW_PUSH_6mm_H9.5mm | SW1, SW2, SW3, SW4, SW5 |
| 3 | CD74HC4067M | Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm | U5, U6, U10 |
| 3 | D-PCUEL3 | LED_THT:LED_Rectangular_W3.9mm_H1.8mm | D31, D32, D33 |
| 3 | R_Small | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R33, R34, R35 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4, J7 |
| 2 | Conn_01x05 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J1, J2 |
| 2 | R_Pot | slider:SC6080GH | RV14, RV15 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J8 |
| 1 | Conn_B1 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | Conn_B2 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | LCUED | LED_THT:LED_Rectangular_W3.9mm_H1.8mm | D41 |
| 1 | LCUER | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R44 |
| 1 | RCUED | LED_THT:LED_Rectangular_W3.9mm_H1.8mm | D49 |
| 1 | RCUER | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R54 |
| 1 | SR1-ML | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U9 |
More from jvegaf/R3M1XXX
12- 2 layers100 × 100 mm

- 2 layers140 × 94 mm

- 2 layers100 × 49 mm

- 2 layers30.5 × 17.8 mm

- 2 layers100 × 150 mm

- 2 layers60 × 60 mm

- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers50 × 100 mm

- 2 layers100 × 76 mm

- 2 layers80 × 52.5 mm

- 2 layers46 × 60 mm

Similar boards
- 2 layers127 × 117.5 mm

Diy ert
CainPatel/diy-ert
A $150 four-electrode earth resistivity meter (Wenner array): Arduino, AD620, ADS1115. Documented failure-first as an engineering log.
44 parts1MIT - 2 layers93.5 × 124.5 mm

- 2 layers150 × 130 mm

- 2 layers95 × 99 mm

Braille Column Rods PCB
KilowattSynthesis/Braille-Display-CAD
Experimental design for a braille display using build123d CAD in Python
151 partsCERN-OHL-P-2.0 - 2 layers95 × 99 mm

Braille Column Rods PCB
KilowattSynthesis/Braille-Display-Column-Rods
Braille display POC using tiny stepper motors to drive columns of the display
161 partsCERN-OHL-P-2.0 - 4 layers95 × 113 mm

- 2 layers

- 2 layers121 × 65.4 mm

Questions
How big is the M01 PCB?
It measures 236.4 × 229 mm and has 2 copper layers, 1.6 mm thick.
What parts does the M01 use?
161 parts, built around the 74HC595 and CD74HC4067M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the M01 KiCad files?
From the jvegaf/R3M1XXX repository on GitHub, at the commit this page was made from: the board is KiCAD/0x1F/old/M01.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the M01 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jvegaf before reusing the design.