
Second Board
MakerLabTunisia/CARVER_X5
CARVER X5 is an OpenSourceHarware 5 Axis CNC Carving Machine - by MakerLabTunisia

Couplerboard is an open-source printed circuit board by justjoheinz, from the justjoheinz/couplerboard repository on GitHub. It is a 2-layer board of 48 × 59 mm with 19 parts on 15 nets, routed with 45 tracks and 0 vias.
It is built around the LTV-817. Its parts include 8 resistors, 4 ICs and 3 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6, R7, R8 |
| 4 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 4 | LTV-817 | Package_DIP:DIP-4_W7.62mm | U1, U2, U3, U4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4 |
| 1 | AudioJack2_SwitchT | Eurorack:ThonkIcon | J1 |
| 1 | Conn_01x06 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type094_RT03506HBLU_1x06_P5.00mm_Horizontal | J3 |
| 1 | Conn_01x08 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type094_RT03506HBLU_1x08_P5.00mm_Horizontal | J2 |

MakerLabTunisia/CARVER_X5
CARVER X5 is an OpenSourceHarware 5 Axis CNC Carving Machine - by MakerLabTunisia

misteu/RPiCoffee
Modding / hacking of a coffee machine (DeLonghi ECAM 22.110.B Magnifica S) for IoT capabilities

rimuadmin/TeensyMaestro-Hardware
Hardware for the TeensyMaestro

devfabiosilva/TeslaSMPS
DIY: High Voltage Range Switching Mode Power Supply for Embedded and Solar systems

JeanRenier/Remoting-a-microBIT-X
A set of ESP32 based controllers to remote a µBIT-X transceiver over the internet

fablabnbg/aussentueren
Hard- and Software for external doors of Hackerspaces

rwobrecht/piTelex-contrib
Contributions (hardware, software) around piTelex

It measures 48 × 59 mm and has 2 copper layers, 1.6 mm thick.
19 parts, built around the LTV-817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the justjoheinz/couplerboard repository on GitHub, at the commit this page was made from: the board is couplerboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask justjoheinz before reusing the design.