
HM AsksinPP Phasenanschnitt
mankut80/AskSinPP_HM-LC-Dim1L-CV
Mit der Technik des Phasenanschnitts lassen sich ohmsche und induktive Wechselstromlasten in der Leistung steuern.

Hard- and Software for external doors of Hackerspaces
Door module is an open-source printed circuit board by fablabnbg, from the fablabnbg/aussentueren repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 162.6 × 113 mm with 176 parts on 129 nets, routed with 629 tracks and 0 vias.
It is built around the LTV-817, LM7805CT and BC557. Its parts include 41 resistors, 33 connectors, 21 ICs, 14 capacitors and 12 diodes.
Hard- and Software for external doors of Hackerspaces
| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | TestPoint | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP61, TP62, TP63, TP64, TP65, TP66, TP67, TP68, TP69, TP71, TP72, TP73, TP74, TP75, TP76, TP77 +20 |
| 18 | LTV-817 | Package_DIP:DIP-4_W7.62mm | U10, U21, U31, U32, U41, U42, U51, U52, U53, U54, U61, U62, U71, U72, U81, U1001 +2 |
| 13 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R16, R36, R52, R53, R54, R61, R68, R71, R78, R81, R88, R91, R98 |
| 10 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R21, R32, R41, R42, R56, R57, R67, R77, R87, R97 |
| 9 | 3k3 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R26, R37, R46, R47, R51, R62, R72, R82, R92 |
| 8 | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill0.8mm | J6, J7, J8, J9, J14, J15, J17, J18 | |
| 8 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D66, D67, D76, D77, D86, D87, D96, D97 |
| 8 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP61, JP62, JP71, JP72, JP81, JP82, JP91, JP92 |
| 7 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J21, J22, J23, J24, J26, J27, J28 |
| 6 | Screw_Terminal_01x02 | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J10, J20, J31, J32, J41, J42 |
| 6 | TestPoint | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP_3V3A1, TP_5V1, TP_5VA1, TP_12VA1, TP_GND1, TP_GNDA1 |
| 5 | 100n | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C2, C4, C5, C7, C9 |
| 5 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11, R66, R76, R86, R96 |
| 4 | 10µ | Capacitor_THT:CP_Radial_D14.0mm_P7.50mm | C3, C11, C21, C23 |
| 4 | BC557 | Package_TO_SOT_THT:TO-92_Inline | Q66, Q76, Q86, Q96 |
| 4 | FT4232_1 | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | J61, J71, J81, J91 |
| 4 | Screw_Terminal_01x04 | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_4-G-5,08_1x04_P5.08mm_Horizontal | J60, J70, J80, J90 |
| 3 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D12, D13 |
| 2 | 100n | Capacitor_THT:CP_Radial_D14.0mm_P7.50mm | C22, C24 |
| 1 | 10µ | Capacitor_THT:CP_Radial_D13.0mm_P7.50mm | C1 |
| 1 | 1µ | Capacitor_THT:CP_Radial_Tantal_D5.5mm_P2.50mm | C8 |
| 1 | 1µ | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C6 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R59 |
| 1 | 2k2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12 |
| 1 | 33 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R31 |
| 1 | 390 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R58 |
| 1 | Cat7 from Server | Connector_RJ:RJ45_Wuerth_7499010121A_Horizontal | J3 |
| 1 | Conn_02x02_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J2 |
| 1 | IRF7404 | Package_TO_SOT_THT:TO-220-3_Vertical | Q11 |
| 1 | LED | LED_THT:LED_D5.0mm | D11 |
| 1 | LM7805CT | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LP2950-3.3_TO92 | Package_TO_SOT_THT:TO-92_Inline | U3 |
| 1 | Raspberry Pi | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | Screw_Terminal_01x06 | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_6-G-5,08_1x06_P5.08mm_Horizontal | J50 |
| 1 | TMA 1205S | Package_SIP:SIP9_Housing_BigPads | U1 |

mankut80/AskSinPP_HM-LC-Dim1L-CV
Mit der Technik des Phasenanschnitts lassen sich ohmsche und induktive Wechselstromlasten in der Leistung steuern.

MakerLabTunisia/CARVER_X5
CARVER X5 is an OpenSourceHarware 5 Axis CNC Carving Machine - by MakerLabTunisia

misteu/RPiCoffee
Modding / hacking of a coffee machine (DeLonghi ECAM 22.110.B Magnifica S) for IoT capabilities

rimuadmin/TeensyMaestro-Hardware
Hardware for the TeensyMaestro

devfabiosilva/TeslaSMPS
DIY: High Voltage Range Switching Mode Power Supply for Embedded and Solar systems

JeanRenier/Remoting-a-microBIT-X
A set of ESP32 based controllers to remote a µBIT-X transceiver over the internet

rwobrecht/piTelex-contrib
Contributions (hardware, software) around piTelex

It measures 162.6 × 113 mm and has 2 copper layers, 1.6 mm thick.
176 parts, built around the LTV-817, LM7805CT and BC557. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the fablabnbg/aussentueren repository on GitHub, at the commit this page was made from: the board is door_module/hardware/door_module.kicad_pcb and its schematic door_module/hardware/door_module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).