
8-Bit CPU 32k
slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

Small buzzer circuits attachable to foil and epee for hit feedback during training
Fencing training buzzer is an open-source printed circuit board by julianschuler, from the julianschuler/Fencing-training-buzzer repository on GitHub, published under the MIT licence. It is a 2-layer board of 26 × 62.2 mm with 15 parts on 12 nets, routed with 135 tracks and 0 vias.
It is built around the 74HC02. Its parts include 4 resistors, 3 capacitors, 2 connectors, 1 IC and 1 diode.
This repository contains the schematic and PCB files for training buzzer circuits for sport fencing. These devices are intended to be attached directly to the plug of a foil respectively epee and will beep and flash a LED for a short period of time if a hit is detected. The buzzer circuits are powered by 1F 5.5V supercapacitors and thus can be recharged quickly by connecting them to a 5V wall adapter (less than 150 seconds for a full charge). The weapon of choice (foil or epee) can be selected via a solder jumper on the PCB.
This project is licensed under the MIT license, see LICENSE.txt for further information.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2 |
| 1 | 100kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 10kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 1F | Training-buzzer-configurable:CP_Radial_Supercap_D21.5mm_P5.00mm | C3 |
| 1 | 1kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 2.2MΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 74HC02 | Package_DIP:DIP-14_W7.62mm_LongPads | U1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Con | Training-buzzer-configurable:Foil_Plug_Connector | J1 |
| 1 | DC Jack 5V | Connector_BarrelJack:BarrelJack_Horizontal | J2 |
| 1 | LED | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm | D1 |
| 1 | SolderJumper | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
The 13 most common of 15 parts.

slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed


leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO


mikey60/BW16-RTL8720DN-Module-Arduino
BW16 (RTL8720DN) Module - Getting Started with Arduino

Ausdauersportler/IMAC-EFI-BOOT-SCREEN
How to create an EFI boot screen vBIOS for Apple Late 2009 to Mid 2011 iMac systems using AMD MXM graphics cards

It measures 26 × 62.2 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the 74HC02. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the julianschuler/Fencing-training-buzzer repository on GitHub, at the commit this page was made from: the board is KiCAD-source/Fencing-training-buzzer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).