2 layers72 × 121 mm
Teebeutel
entropia/Teebeutel-Hardware
Teebeutel (eng. Teabag) is an electronic, Entropia themed con-badge for the GPN20, featuring an ESP32 microprocessor running micropython.
201 parts1
2 layers77 × 77 mm
JugendHackt Badge Display
Jugendhackt/Badge-2022Mirror of the Jugendhackt badge repository
- Size
- 77 × 77 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 140
- Nets
- 97
- Pads
- 374
- Tracks, vias
- 930, 221
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 6 Sep 2022
- Updated
- 14 Sep 2022
Overview
JugendHackt Badge Display is an open-source printed circuit board by Jugendhackt, from the Jugendhackt/Badge-2022 repository on GitHub. It is a 2-layer board of 77 × 77 mm with 140 parts on 97 nets, routed with 930 tracks and 221 vias.
It is built around the CH340C, ESP32-WROOM-32 and SDB628, with the TLV62568DBV, SRV05-4 and WS2812B among its other parts. Its parts include 29 resistors, 28 capacitors, 12 diodes, 7 ICs and 4 switches. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
9
CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
SDB628
SOT-23-6-40℃~+85℃ 1 1.2MHz 100uA、1.6mA 28V 2A 2V~24V Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHSSHOUDINGDC-DC Converters
TLV62568DBV
SOT-23-5-40℃~+125℃@(TJ) 1 1.5MHz 1A 2.5V~5.5V 35uA 600mV~5.5V Adjustable Buck Buck Built-in Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersSRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
1N4148WL
SOD-123F-55℃~+150℃ 1.5V@300mA 100V 1uA@75V 300mA 400mW 4A 8ns Standalone SOD-123F Switching Diodes ROHS晶导微电子Switching Diodes
S8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
K1-1506SN-01
SMD,10x10mmSMD,10x10mm Multi-Directional Switches ROHSHRO ElectronicsMulti-Directional Switches
Parts
140| Qty | Value | Footprint | References |
|---|---|---|---|
| 38 | TestPoint | Caffeinated Labs:Test-Pad-1x2mm | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +22 |
| 14 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 9 | 100kΩ 1% | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 9 | 10µF | Capacitor_SMD:C_0603_1608Metric | C20, C21, C22, C23, C24, C25, C26, C27, C28 |
| 7 | 2.2kΩ | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R13, R14, R15, R16 |
| 6 | WS2812B | Caffeinated Labs:WS2812B-4020 | D7, D8, D9, D10, D11, D12 |
| 5 | 4.7µF | Capacitor_SMD:C_0603_1608Metric | C15, C16, C17, C18, C19 |
| 4 | 56Ω | Resistor_SMD:R_0603_1608Metric | R17, R18, R19, R20 |
| 3 | 1N4148WL | Diode_SMD:D_SOD-123F | D1, D2, D3 |
| 3 | 30kΩ 1% | Resistor_SMD:R_0603_1608Metric | R21, R22, R23 |
| 2 | 3.3V | Caffeinated Labs:LabConnector_4mm | IO1, IO7 |
| 2 | 453kΩ 1% | Resistor_SMD:R_0603_1608Metric | R24, R25 |
| 2 | 470Ω | Resistor_SMD:R_0603_1608Metric | R27, R28 |
| 2 | GND | Caffeinated Labs:LabConnector_4mm | IO6, IO12 |
| 2 | Polyfuse | Fuse:Fuse_0805_2012Metric | F1, F2 |
| 2 | S8050 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SW_Push | Caffeinated Labs:K2-1817UQ-C4SW-01 | SW3, SW4 |
| 1 | 1µH | Inductor_SMD:L_1210_3225Metric | L2 |
| 1 | 4.7µH | Inductor_SMD:L_1210_3225Metric | L1 |
| 1 | 560kΩ | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | 620kΩ 1% | Resistor_SMD:R_0603_1608Metric | R29 |
| 1 | ADC | Caffeinated Labs:LabConnector_4mm | IO10 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J1 |
| 1 | Conn_01x30_Female | Connector_FFC-FPC:TE_3-1734839-0_1x30-1MP_P0.5mm_Horizontal | J2 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U2 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D5 |
| 1 | IO18 | Caffeinated Labs:LabConnector_4mm | IO2 |
| 1 | IO19 | Caffeinated Labs:LabConnector_4mm | IO3 |
| 1 | IO22 | Caffeinated Labs:LabConnector_4mm | IO4 |
| 1 | IO23 | Caffeinated Labs:LabConnector_4mm | IO5 |
| 1 | K1-1506SN-01 | Caffeinated Labs:K1-1506SN-01 | SW1 |
| 1 | LED | Caffeinated Labs:LabConnector_4mm | IO11 |
| 1 | LED-IR | Caffeinated Labs:LKIR30102C | D4 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | OLED VPP (13V) | TestPoint:TestPoint_Pad_D1.0mm | TP39 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D6 |
| 1 | RM-V8xxC_TR1 | Caffeinated Labs:IRM-V8xxC-TR1 | U7 |
| 1 | SCL | Caffeinated Labs:LabConnector_4mm | IO8 |
| 1 | SDA | Caffeinated Labs:LabConnector_4mm | IO9 |
| 1 | SDB628 | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW2 |
| 1 | TLV62568DBV | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J3 |
Questions
How big is the JugendHackt Badge Display PCB?
It measures 77 × 77 mm and has 2 copper layers, 1.6 mm thick.
What parts does the JugendHackt Badge Display use?
140 parts, built around the CH340C, ESP32-WROOM-32, SDB628 and TLV62568DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the JugendHackt Badge Display KiCad files?
From the Jugendhackt/Badge-2022 repository on GitHub, at the commit this page was made from: the board is JugendHackt-Badge-Display.kicad_pcb and its schematic JugendHackt-Badge-Display.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the JugendHackt Badge Display design in my own project?
Its repository states no licence, so its author keeps all rights: ask Jugendhackt before reusing the design.
Similar boards
- 2 layers85 × 56 mm
- 2 layers98 × 98 mm
- 2 layers55 × 100 mm
- 4 layers43.1 × 37.7 mm
Machine Controller
FinnKrass/MX-Break-In-Machine
64 Slot Break In Machine for MX Style Switches
84 parts15CERN-OHL-S-2.0 - 2 layers85.8 × 77.5 mm
- 4 layers368.2 × 159.8 mm
- 2 layers19.6 × 19.6 mm
