2 layers187.2 × 26.6 mm
2 layers55.9 × 35.6 mm
RC LightDistribution
juepi/RC-LightDistributionSmall KiCAD6 PCB for LED light distribution in a RC car. Allows multiple in- and outputs and LED resistance mounts
- Size
- 55.9 × 35.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 17
- Pads
- 88
- Tracks, vias
- 132, 15
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 5 Feb 2022
- Updated
- 29 Apr 2022
Overview
RC LightDistribution is an open-source printed circuit board by juepi, from the juepi/RC-LightDistribution repository on GitHub. It is a 2-layer board of 55.9 × 35.6 mm with 50 parts on 17 nets, routed with 132 tracks and 15 vias.
Its parts include 8 resistors and 5 connectors.
README
README.mdRC-Model LED Light Distribution PCB
This small PCB allows you to distribute power for LED lightning in your RC-models. One PCB can handle multiple in- and outputs, through soldering jumpers you are also able to combine in- and outputs. Each output provides through-holes for LED series resistors, 2 outputs can be tied together for a single series resistor for 2 LEDs.
Usage
Usage should be fairly clear, you can connect the wires either through the provided through-holes or by using the soldering pads.
Production files
Subfolder gerber contains files required for production. These files have been prepared for JLCPCB.
have fun,
Juergen
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | TestPoint:TestPoint_Keystone_5015_Micro-Minature | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +12 | |
| 8 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 | |
| 7 | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7 | |
| 4 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J2, J4, J5 | |
| 2 | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2 | |
| 1 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J3 |
Questions
How big is the RC LightDistribution PCB?
It measures 55.9 × 35.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RC LightDistribution use?
50 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RC LightDistribution KiCad files?
From the juepi/RC-LightDistribution repository on GitHub, at the commit this page was made from: the board is KiCAD/RC-LightDistribution.kicad_pcb and its schematic KiCAD/RC-LightDistribution.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RC LightDistribution design in my own project?
Its repository states no licence, so its author keeps all rights: ask juepi before reusing the design.
Similar boards
- 2 layers45.7 × 25.9 mm
- 2 layers21 × 31.5 mm
- 2 layers42 × 32.5 mm
Lipoboard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
50 parts915 - 2 layers80 × 109.5 mm
NucDeck Right Controller PCB - Rev 1.2
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
50 parts561CERN-OHL-S-2.0 - 2 layers101 × 31.5 mm
- 2 layers123.9 × 94.4 mm
- 2 layers50 × 25 mm
Mbus master
roarfred/AmsToMqttBridge
Minimalistic system to read AMS/HAN data from electrical meter
50 parts223