Skip to the content
2 layersAutoLightPCB, the printed circuit board in 3D

This project has two main directories: - Software: Two main sub-directories, the light-Module where the code for the esp is maintain, and the "mosquitto-Server" with the ".conf" file for the server.

Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
17
Pads
53
Tracks, vias
91, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
11 Apr 2026
Updated
13 Apr 2026

Overview

AutoLightPCB is an open-source printed circuit board by JuanCamilo0509, from the JuanCamilo0509/autoLights repository on GitHub. It is a 2-layer board with 13 parts on 17 nets, routed with 91 tracks and 0 vias.

It is built around the ESP8266EX, AMS1117-3.3 and MOC3041M. Its parts include 3 resistors, 3 ICs, 3 connectors, 2 transistors and 1 capacitor. It belongs with the ESP8266 boards of this library.

Main components

3

README

README.md

Automatic light module

This project aims to be a plug and play wall switch based on the esp8266 board and using MQTT protocol for communications.

text
.
├── Hardware
│   └── autoLightPCB(Kicad)
├── README.md
└── software
    ├── lightModule(esp8266)
    └── mosquittoServer
        └── mosquitto.conf

This project has two main directories: - Software: Two main sub-directories, the light-Module where the code for the esp is maintain, and the "mosquitto-Server" with the ".conf" file for the server. - Hardware: In this repository you can find the PCB layout for the board and the 3d model for the case.

How to configure an ESP?

  1. Upload the code to the esp.
  2. When power, the esp will create a WIFI entrance call "esp".
  3. Connect to "esp" Network.
  4. Using any browser go to htpp://192.168.4.1/.
  5. Fill all the information for the esp. (You can test the light to know which light you're setting up).
  6. Send all the information. The esp should restart with all the information saved.
  7. You're done, try to change the state from your phone. (I recommend using IoT MQTT Panel to test it).

Features

  • HTTP Server on SoftAP mode when the variables aren't on the esp memory to set them up: (SSID, WiFi password, broker and topic).
image image

Parts

13
QtyValueFootprintReferences
2220Resistor_SMD:R_0603_1608MetricR1, R2
2Screw_Terminal_01x02Connector_Phoenix_SPT:PhoenixContact_SPT_1.5_2-H-3.5_1x02_P3.5mm_HorizontalJ2, J5
12N2219Package_TO_SOT_THT:TO-92L_InlineQ2
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1BT136-500Package_TO_SOT_THT:TO-220-3_VerticalQ1
1C_SmallCapacitor_SMD:C_0504_1310MetricC1
1Esp8266Connector_Wuerth:Wuerth_WR-PHD_613008216921_Large_2x04_P2.54mm_VerticalJ3
1LEDLED_THT:LED_D5.0mmD1
1MOC3041MPackage_DIP:DIP-6_W7.62mm_LongPadsU1
1R_SmallResistor_SMD:R_0603_1608MetricR3
1TSOP382xxOptoDevice:Vishay_MINICAST-3PinU3

Similar boards

  • 2 layers90 × 100 mmOlivia control, the printed circuit board in 3D

    Olivia control

    AlterMundi-MonitoreoyControl/Proyecto-Incubadora

    Is an innovative project aimed at enhancing the efficiency and productivity of poultry incubators in family farming.

    51 parts4LGPL-2.1
  • 2 layers92 × 92 mmPreheater, the printed circuit board in 3D

    Preheater

    hetii/preheater

    The controller supports multiple heating zones, thermocouple monitoring, fan control, and a modern web-based interface for managing the entire process directly from a browser.

    158 parts
  • 4 layers100 × 54 mm32Bit shift register, the printed circuit board in 3D

    32Bit shift register

    MaltWhiskey/Mega-Cube

    16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver

    64 parts766
  • 6 layers158 × 158 mmFpv drone, the printed circuit board in 3D

    Fpv drone

    zeodotdev/zeo-boards

    ESP32-S3 development board with onboard BME280 (temperature, humidity, pressure) and LSM6DS3 (6-axis IMU) sensors. This repo contains the designs, ESP-IDF firmware, and a Python plotter for visualization.

    158 parts3
  • 2 layers61 × 24.4 mmRuntime Testor, the printed circuit board in 3D

    Runtime Testor

    ENG-EDISON/Sunking_PCBA_Projects

    This repository contains SUNKING developed PCBAs

    38 parts
  • 2 layers121 × 68 mmFreeds sanchez, the printed circuit board in 3D

    Freeds sanchez

    pablozg/freeds

    Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora

    42 parts108
  • 2 layers50.8 × 50.8 mmEsp switch, the printed circuit board in 3D

    Esp switch

    foxel/esp-dual-rf-switch

    LightFox Dual: esp8266 WiFi+RF dual channel switch

    29 parts6

Questions

What parts does the AutoLightPCB use?

13 parts, built around the ESP8266EX, AMS1117-3.3 and MOC3041M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AutoLightPCB KiCad files?

From the JuanCamilo0509/autoLights repository on GitHub, at the commit this page was made from: the board is hardware/autoLightPCB/autoLightPCB.kicad_pcb and its schematic hardware/autoLightPCB/autoLightPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the AutoLightPCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask JuanCamilo0509 before reusing the design.