

ATMega328P Template1.0
ressources Kicad
- Size
- 100 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 35
- Pads
- 89
- Tracks, vias
- 190, 12
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 5 Apr 2017
- Updated
- 5 Apr 2017
Overview
ATMega328P Template1.0 is an open-source printed circuit board by juanbravo, from the juanbravo/KicadIUT repository on GitHub. It is a 2-layer board of 100 × 80 mm with 24 parts on 35 nets, routed with 190 tracks and 12 vias.
It is built around the ATMEGA328P-MU, LD1117S33CTR-HXY and MBR140W. Its parts include 8 capacitors, 5 resistors, 4 connectors, 2 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA328P-MU
HVQFN-32(5x5)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH VQFN-32(5x5) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)LD1117S33CTR-HXY
SOT-223-20℃~+85℃ 1.3V@(800mA) 15V 2mA 3.3V 800mA Fixed Over Temperature Protection SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHXY MOSFETVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMBR140W
SOD-1231 Independent 1A 30uA@40V 40V 5.5A 540mV@1A SOD-123 Schottky Diodes ROHSCBISchottky Diodes
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitors_SMD:C_0805 | C1, C2, C5, C6 |
| 3 | 1k | Resistors_SMD:R_0805 | R1, R3, R4 |
| 2 | 18p | Capacitors_SMD:C_0805 | C7, C8 |
| 1 | 10u | Capacitors_SMD:C_0805 | C4 |
| 1 | 10u/16V | Capacitors_SMD:C_0805 | C3 |
| 1 | 16M | IUT-CRYSTAL:IUT-Crystal_HC49-SD_SMD_RevA_09Aug2010 | Y1 |
| 1 | 1M | Resistors_SMD:R_0805 | R2 |
| 1 | ATMEGA328P-M | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | IC1 |
| 1 | CONN_01X01 | IUT-CONNECTIQUE:IUT-1pin | P2 |
| 1 | CONN_01X02 | IUT-CONNECTIQUE:IUT-bornier2 | P1 |
| 1 | CONN_01X06 | IUT-CONNECTIQUE:IUT-SIL-6 | P4 |
| 1 | CONN_02X03 | IUT-CONNECTIQUE:IUT-conn_3x2 | P3 |
| 1 | EuroBoard_halb_Type-I_100mmX80mm_holes | EuroBoard_Outline:EuroBoard_halb_Type-I_100mmX80mm_holes | GEII Toulon |
| 1 | It=160mA nanoASMDC016F | SMD_Packages:SMD-1210_Pol | F1 |
| 1 | LD1117S33CTR | TO_SOT_Packages_SMD:SOT-223 | U1 |
| 1 | LED | LEDs:LED_0805 | D2 |
| 1 | MBR140 | Diodes_SMD:MiniMELF_Handsoldering | D1 |
| 1 | R | Resistors_SMD:R_0805 | R5 |
More from juanbravo/KicadIUT
2- 2 layers128.3 × 99.1 mm

- 2 layers68.6 × 53.3 mm

Similar boards
- 2 layers

04 ttsumo
briel0/ttsumo-sensor-ir
Sensor Infravermelho de Oponente 38 kHz (TTSumo) para Robótica Mini-Sumo e ESP32 projetado no KiCad 10
19 parts - 2 layers85 × 17 mm

- 2 layers148.1 × 37.1 mm

- 2 layers34.3 × 26.7 mm

- 2 layers47 × 47 mm

- 2 layers49.4 × 43.7 mm

Chaos papagali
Pakequis/Chaos_papagali
A annoying device that imitates the vibration of a phone
41 parts2MIT - 2 layers

- 2 layers

Drone ESC
Arpit192005/Drone-ESC
A custom 3-phase Brushless DC (BLDC) Electronic Speed Controller (ESC) designed in KiCad, intended for drone and robotics applications.
31 parts1
Questions
How big is the ATMega328P Template1.0 PCB?
It measures 100 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ATMega328P Template1.0 use?
24 parts, built around the ATMEGA328P-MU, LD1117S33CTR-HXY and MBR140W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ATMega328P Template1.0 KiCad files?
From the juanbravo/KicadIUT repository on GitHub, at the commit this page was made from: the board is BoardTemplate/ATMega328P_Template1.0/ATMega328P_Template1.0.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ATMega328P Template1.0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask juanbravo before reusing the design.