
ElectronicEggDrop
JTDaniel/ElectronicEggDrop
This is a project Pioneered by the Arizona State University MakerSpace workers, J. Travis Daniel, Gehrig Dixon, and Liam Nelson.

This is a project Pioneered by the Arizona State University MakerSpace workers, J. Travis Daniel, Gehrig Dixon, and Liam Nelson. The goal is to make an egg drop experiment that is more sustainable than the regular use of this experiment in physics classrooms today. This is being done by replacing regular edible egss with electronic sensor packages designed to look like an egg.
ElectronicEggDrop is an open-source printed circuit board by JTDaniel, from the JTDaniel/ElectronicEggDrop repository on GitHub. It is a 2-layer board of 52.9 × 74.6 mm with 13 parts on 34 nets, routed with 117 tracks and 0 vias.
It is built around the ABX00053.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3 |
| 2 | Conn_01x06_Male | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | LIS3DH Connector, SD Card Reader Connector |
| 2 | Screw_Terminal_01x02 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | +3.7v, +3.7V |
| 1 | ABX00053 | Arduino Nano:MODULE_ABX00053 | Arduino Nano |
| 1 | LED_RAGB | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | Indicator_LEDs1 |
| 1 | SW_SPST | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | Switch |
The 10 most common of 13 parts.

JTDaniel/ElectronicEggDrop
This is a project Pioneered by the Arizona State University MakerSpace workers, J. Travis Daniel, Gehrig Dixon, and Liam Nelson.

JTDaniel/ElectronicEggDrop
This is a project Pioneered by the Arizona State University MakerSpace workers, J. Travis Daniel, Gehrig Dixon, and Liam Nelson.



samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments


willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 52.9 × 74.6 mm and has 2 copper layers, 1.6 mm thick.
13 parts, built around the ABX00053. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JTDaniel/ElectronicEggDrop repository on GitHub, at the commit this page was made from: the board is Electronics/ElectronicEggDropV1/ElectronicEggDrop.kicad_pcb and its schematic Electronics/ElectronicEggDropV1/ControlEgg/ElectronicEggDrop.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JTDaniel before reusing the design.