
ElectronicEggDrop
JTDaniel/ElectronicEggDrop
This is a project Pioneered by the Arizona State University MakerSpace workers, J. Travis Daniel, Gehrig Dixon, and Liam Nelson.

This is a project Pioneered by the Arizona State University MakerSpace workers, J. Travis Daniel, Gehrig Dixon, and Liam Nelson. The goal is to make an egg drop experiment that is more sustainable than the regular use of this experiment in physics classrooms today. This is being done by replacing regular edible egss with electronic sensor packages designed to look like an egg.
ElectronicEggDrop is an open-source printed circuit board by JTDaniel, from the JTDaniel/ElectronicEggDrop repository on GitHub. It is a 2-layer board of 52.9 × 74.6 mm with 21 parts on 42 nets, routed with 319 tracks and 15 vias.
It is built around the ABX00053 and LIS3DH.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | LED_RAGB | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | RGBLED0, RGBLED1, RGBLED2, RGBLED3 |
| 3 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 2 | Screw_Terminal_01x02 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | PW1, PW2 |
| 1 | |||
| 1 | ABX00053 | Arduino Nano:MODULE_ABX00053 | ArduNano |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | AccelAnalog1 |
| 1 | Conn_02x05_Top_Bottom | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | GNDBlock |
| 1 | Conn_02x07_Top_Bottom | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | ArduGPIO1 |
| 1 | LIS3DH | ElectronicEggDrop:LIS3DH | Accelerometer1 |
| 1 | SDCardReader | ElectronicEggDrop:SDCardReader | SD_Reader1 |
| 1 | SW_SPST | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | Switch1 |
The 17 most common of 21 parts.

JTDaniel/ElectronicEggDrop
This is a project Pioneered by the Arizona State University MakerSpace workers, J. Travis Daniel, Gehrig Dixon, and Liam Nelson.

JTDaniel/ElectronicEggDrop
This is a project Pioneered by the Arizona State University MakerSpace workers, J. Travis Daniel, Gehrig Dixon, and Liam Nelson.



TobleMiner/blinkekatze
Blinkekatze, a replacement PCB to turn cat themed night-lights into interactive light displays

aws/iot-expresslink
This device was designed and created for the AWS IoT ExpressLink Demo Badge Workshop, which was run at re:Invent 2022.

LeoDJ/USB-C_PD_PSU
A 5-60V bidirectional buck-boost-converter, also capable of 240W USB PD EPR (48V 5A)



It measures 52.9 × 74.6 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the ABX00053 and LIS3DH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JTDaniel/ElectronicEggDrop repository on GitHub, at the commit this page was made from: the board is Electronics/ElectronicEggDropV2/ElectronicEggDrop.kicad_pcb and its schematic Electronics/ElectronicEggDropV1/ControlEgg/ElectronicEggDrop.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JTDaniel before reusing the design.