Skip to the content
2 layersCollector, the printed circuit board in 3D

esp32_bikedash

Copper layers
2
Thickness
1.6 mm
Parts
2
Nets
32
Pads
36
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 8.0 (file 20240108)
Created
1 Feb 2025
Updated
17 Mar 2025

Overview

Collector is an open-source printed circuit board by jsoeterbroek, from the jsoeterbroek/esp32_bikedash repository on GitHub. It is a 2-layer board with 2 parts on 32 nets.

It is built around the ESP32-C6-DEVKITC-1-N8. It belongs with the ESP32 and RISC-V boards of this library.

Main components

1

README

README.md

esp32_bikedash

This hobby/learning project initially started out as a way to collect and display data from the Battery Monitor hardware module connected to my motorcycle battery via Bluetooth protocol. Due to some severe scope creep it has now grown to include GPS and temperature data.

The setup consists of two parts: 1) the collector, responsible for collecting data and sending to the 2) dashboard, which is responsible for displaying data. The collector is going to be permanently attached to the bike and powered by the 12v battery and will be hidden out of sight under the sadle so it can also be used as a future anti-theft device (with GSM integration). The display part will be powered via USB in a 3D-printed case and will be detachable to avoid unnecessary environmental exposure.

Collector

Power

Motorcycle battery

Dashboard

Power

USB

Parts

see PARTS.md

TODO

Dashboard

  • Motorcycle gear display
  • Motorcycle fuel display

Anti-theft

  • GSM integration
  • Use the dashboard to lock(default)/unlock bike (battery)
  • Authenticate user via dashboard

ESP Home

  • Integration with ESP Home (MQTT)

see also TODO.txt

Pictures

Prototypes

Parts

2
QtyValueFootprintReferences
1ESP32-C6-DevKitC-1PCM_Espressif:ESP32-C6-DevKitC-1U1
1~collector:GY-GPS6MV2U2

Similar boards

  • 2 layers63 × 58 mmOPNpool r5, the printed circuit board in 3D

    OPNpool r5

    cvonk/OPNpool

    Integrates the functionality of a Pentair pool controller into the smart home using ESP32 SoC.

    17 parts102
  • 2 layers140 × 80 mmIntelliThings, the printed circuit board in 3D

    IntelliThings

    embedded-purdue/IntelliThings

    From IoT to AIoT: ESP32-C6 sensor nodes, Home Assistant and an LLM agent that acts through MCP

    12 parts5
  • 2 layers174.5 × 90.4 mmVolante Maquinillo, the printed circuit board in 3D

    Volante Maquinillo

    Angelpele/F1-Steering-Wheel

    F1 Functional Steering Wheel based on the ESP32

    65 parts2
  • 2 layers62.5 × 50.2 mmController, the printed circuit board in 3D

    Controller

    kongr45gpen/led-controller-pcb

    A PCB to control LEDs (up to 5 channels) using PWM, based on an Espressif ESP32-C6 development board.

    44 parts2CERN-OHL-W-2.0
  • 2 layers51 × 70.1 mmLeels breakout, the printed circuit board in 3D

    Leels breakout

    leehambley/leels

    Lee LS (Lead Screw). Forked and simplified from kachurovskiy/nanoels, rewritten in Rust and simplified for a true ELS implementation not a quasi-CNC controller

    28 parts2
  • 2 layers125 × 78.2 mmRC ESP32 V2, the printed circuit board in 3D

    RC ESP32 V2

    Poent/RC-Snowblower

    Working on designing the impeller and auger portion of the snowblower. Switched from using a worm gear assembly to a custom ring and pinion setup using a spiral bevel gear.

    84 parts2
  • 2 layers252.9 × 55 mmSulari 170V, the printed circuit board in 3D

    Sulari 170V

    antsakur/nixie-clock

    Open-source Nixie clock project. Gerbers, BOM and firmware.

    78 parts1
  • 4 layers353 × 117 mmKEYBOARD, the printed circuit board in 3D

    KEYBOARD

    Ekam-wadhwa1/nexus.terminal

    it is a portable touchscreen device with 2 displays powered by a lattepanda iota with 16gb ram and intel n150. paired with a custom built mechanical keyboard for typing,coding,streaming and web browsing

    177 parts1GPL-3.0

Questions

What parts does the Collector use?

2 parts, built around the ESP32-C6-DEVKITC-1-N8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Collector KiCad files?

From the jsoeterbroek/esp32_bikedash repository on GitHub, at the commit this page was made from: the board is collector/kicad/pcb/collector/collector.kicad_pcb and its schematic collector/kicad/pcb/collector/collector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Collector design in my own project?

Its repository states no licence, so its author keeps all rights: ask jsoeterbroek before reusing the design.