
OPNpool r5
cvonk/OPNpool
Integrates the functionality of a Pentair pool controller into the smart home using ESP32 SoC.

esp32_bikedash
Collector is an open-source printed circuit board by jsoeterbroek, from the jsoeterbroek/esp32_bikedash repository on GitHub. It is a 2-layer board with 2 parts on 32 nets.
It is built around the ESP32-C6-DEVKITC-1-N8. It belongs with the ESP32 and RISC-V boards of this library.
This hobby/learning project initially started out as a way to collect and display data from the Battery Monitor hardware module connected to my motorcycle battery via Bluetooth protocol. Due to some severe scope creep it has now grown to include GPS and temperature data.
The setup consists of two parts: 1) the collector, responsible for collecting data and sending to the 2) dashboard, which is responsible for displaying data. The collector is going to be permanently attached to the bike and powered by the 12v battery and will be hidden out of sight under the sadle so it can also be used as a future anti-theft device (with GSM integration). The display part will be powered via USB in a 3D-printed case and will be detachable to avoid unnecessary environmental exposure.
Motorcycle battery
USB
see PARTS.md
see also TODO.txt
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | ESP32-C6-DevKitC-1 | PCM_Espressif:ESP32-C6-DevKitC-1 | U1 |
| 1 | ~ | collector:GY-GPS6MV2 | U2 |

cvonk/OPNpool
Integrates the functionality of a Pentair pool controller into the smart home using ESP32 SoC.

embedded-purdue/IntelliThings
From IoT to AIoT: ESP32-C6 sensor nodes, Home Assistant and an LLM agent that acts through MCP

Angelpele/F1-Steering-Wheel
F1 Functional Steering Wheel based on the ESP32

kongr45gpen/led-controller-pcb
A PCB to control LEDs (up to 5 channels) using PWM, based on an Espressif ESP32-C6 development board.

leehambley/leels
Lee LS (Lead Screw). Forked and simplified from kachurovskiy/nanoels, rewritten in Rust and simplified for a true ELS implementation not a quasi-CNC controller

Poent/RC-Snowblower
Working on designing the impeller and auger portion of the snowblower. Switched from using a worm gear assembly to a custom ring and pinion setup using a spiral bevel gear.


Ekam-wadhwa1/nexus.terminal
it is a portable touchscreen device with 2 displays powered by a lattepanda iota with 16gb ram and intel n150. paired with a custom built mechanical keyboard for typing,coding,streaming and web browsing
2 parts, built around the ESP32-C6-DEVKITC-1-N8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jsoeterbroek/esp32_bikedash repository on GitHub, at the commit this page was made from: the board is collector/kicad/pcb/collector/collector.kicad_pcb and its schematic collector/kicad/pcb/collector/collector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jsoeterbroek before reusing the design.