4 layers56 × 60 mm
2 layers128 × 70.5 mm
EL6170 Pro Max Plus
jsjsjsjsjsjsjson/EL6170_Pro_Max_Plus7- Size
- 128 × 70.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 164
- Nets
- 103
- Pads
- 526
- Tracks, vias
- 1,786, 511
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Sep 2024
- Updated
- 31 Oct 2024
Overview
EL6170 Pro Max Plus is an open-source printed circuit board by jsjsjsjsjsjsjson, from the jsjsjsjsjsjsjson/EL6170_Pro_Max_Plus repository on GitHub. It is a 2-layer board of 128 × 70.5 mm with 164 parts on 103 nets, routed with 1,786 tracks and 511 vias.
It is built around the ESP32-S3-WROOM-1U-N4, CH340K and CH334R, with the ME6211C33M5G-N, ME6217C33M5G and PCM5102APW among its other parts. Its parts include 40 capacitors, 31 resistors, 31 switches, 9 diodes and 7 ICs. It belongs with the ESP32 boards of this library.
Main components
12
ESP32-S3-WROOM-1U-N4
SMD,19.2x18mm-103.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 UART、SPI、I2C、I2S、USB SMD,19.2x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
CH340K
ESSOP-10-150mil-1mm-20℃~+70℃ 2Mbps 3.3V、5V USB 2.0 USB to serial ESSOP-10-150mil-1mm USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
CH334R
QSOP-16-150mil-40℃~+85℃ 0.4mA 3.3V、5V 4 480Mbps 85mA Hub I2C USB 2.0 QSOP-16-150mil USB HUB Controllers ROHSWCH (Nanjing Qinheng Microelectronics)USB HUB Controllers
ME6211C33M5G-N
SOT-23-5-40℃~+150℃ 1 120mV@(100mA) 3.3V 500mA 50uVrms 60uA 6V 70dB@(1kHz) Fixed Over Current Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsME6217C33M5G
SOT-23-5-40℃~+85℃ 1 100uA 180mV@(300mA) 3.3V 6.5V 65dB@(1kHz) 800mA Fixed Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
PCM5102APW
TSSOP-20-25℃~+85℃ 1.8V~3.3V 2 32 384kHz 500uA 50MHz Audio Decoder Digital filtering、Power-down mode I2S TSSOP-20 ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special Purpose
LESD8D3.3CAT5G
SOD-882100nA 10V 16pF 3.3V 6.5V 60W 6A Bidirectional ESD IEC 61000-4-2 SOD-882 ESD and Surge Protection (TVS/ESD) ROHSLeshan Radio (LRC)ESD And Surge Protection (TVS/ESD)
AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
PJ-320B
SMD-25℃~+75℃ 24V 25mA 3.5mm Headphone Jack Phosphor Bronze SMD Audio Connectors ROHSSOFNGAudio Connectors (Headphones)
SCCD43-220KT
SMD22uH ±10% SMD Power Inductors ROHSYanchuangPower Inductors
SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdEL6170_Pro_Max_Plus
Parts
164| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | SparkFun-Resistor:R_0402_1005Metric | R24, R25, R26, R27, R28, R29, R30, R31, R32, R33, R36 |
| 10 | 0.1uF | SparkFun-Capacitor:C_0603_1608Metric | C1, C3, C31, C32, C33, C34, C38, C42, C46, C49 |
| 6 | LESD8D3.3CAT5G | Diode_SMD:D_SOD-882 | D6, D7, D8, D9, D10, D11 |
| 5 | 0.1uF | SparkFun-Capacitor:C_0402_1005Metric | C17, C19, C21, C25, C45 |
| 5 | 4.7uF | SparkFun-Capacitor:C_0603_1608Metric | C2, C4, C5, C6, C7 |
| 5 | 470 | SparkFun-Resistor:R_0603_1608Metric | R13, R14, R15, R16, R17 |
| 4 | 10uF | SparkFun-Capacitor:C_0402_1005Metric | C16, C18, C24, C44 |
| 4 | 4.7k | SparkFun-Resistor:R_0402_1005Metric | R5, R6, R8, R9 |
| 3 | 22uF | SparkFun-Capacitor:C_0603_1608Metric | C40, C41, C50 |
| 3 | LOGO | LOGO | ESP_LOGO, G***, G*** |
| 2 | 10uF | SparkFun-Capacitor:C_0603_1608Metric | C35, C43 |
| 2 | 12pF | SparkFun-Capacitor:C_0402_1005Metric | C47, C48 |
| 2 | 1M | SparkFun-Resistor:R_0603_1608Metric | R34, R35 |
| 2 | 1uF | SparkFun-Capacitor:C_0603_1608Metric | C36, C37 |
| 2 | 2.2nF | SparkFun-Capacitor:C_0603_1608Metric | C27, C28 |
| 2 | 2.2uF | SparkFun-Capacitor:C_0603_1608Metric | C29, C30 |
| 2 | 330 | SparkFun-Resistor:R_0603_1608Metric | R21, R22 |
| 2 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q4, Q5 |
| 2 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | ~ | TestPoint:TestPoint_Pad_2.0x2.0mm | BAT-, BAT+ |
| 1 | 0 | SparkFun-Resistor:R_0603_1608Metric | R19 |
| 1 | 1.8M | SparkFun-Resistor:R_0603_1608Metric | R12 |
| 1 | 10uH | SparkFun-Coil:Inductor_4.7x4.7mm | L5 |
| 1 | 12MHz | easyeda2kicad:CRYSTAL-SMD_4P-L2.5-W2.0-BL-A | X2 |
| 1 | 15k | SparkFun-Resistor:R_0603_1608Metric | R10 |
| 1 | 1uF | SparkFun-Capacitor:C_0402_1005Metric | C20 |
| 1 | 2 | SparkFun-Resistor:R_0603_1608Metric | R23 |
| 1 | 205K | SparkFun-Resistor:R_0603_1608Metric | R11 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | 32.768kHz | SparkFun-Clock:Crystal_SMD_3.2x1.5mm | Y1 |
| 1 | 4.7pF | SparkFun-Capacitor:C_0402_1005Metric | C26 |
| 1 | 47uF | SparkFun-Capacitor:C_0805_2012Metric | C39 |
| 1 | 499 | SparkFun-Resistor:R_0402_1005Metric | R7 |
| 1 | 560 | SparkFun-Resistor:R_0402_1005Metric | R1 |
| 1 | BOOT | Butm:MaskBtm4mm | SWBOOT1 |
| 1 | CH334R | Package_SO:QSOP-16_3.9x4.9mm_P0.635mm | U8 |
| 1 | CH340K | Package_SO:SSOP-10-1EP_3.9x4.9mm_P1mm_EP2.1x3.3mm | U6 |
| 1 | ESP32-S3-WROOM-1U | RF_Module:ESP32-S3-WROOM-1U | U13 |
| 1 | LED | SparkFun-LED:LED_0603_1608Metric | D2 |
| 1 | ME6211C33M5 | Package_TO_SOT_SMD:SOT-23-5 | U10 |
| 1 | ME6217C33M5 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | MICRO QTZB5.0 | easyeda2kicad:MICRO-USB-SMD_MICRO-QTZB5.0 | USB1 |
| 1 | PCF8575DBR | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | U12 |
| 1 | PCM5102A | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U9 |
| 1 | PJ-320B | easyeda2kicad:AUDIO-SMD_PJ-320B | Audio1 |
| 1 | RST | Butm:MaskBtm4mm | SWRST1 |
| 1 | SCCD43-220KT | easyeda2kicad:IND-SMD_L4.5-W4.0_SCCD43 | L6 |
| 1 | SS14 | Diode_SMD:D_SMA | D3 |
| 1 | SS34 | Diode_SMD:D_SMA | D5 |
| 1 | SW_CALENDAR | Butm:MaskBtm5mm | SW52 |
| 1 | SW_CE(IO0) | Butm:MaskBtm5mm | SW46 |
| 1 | SW_DOWN | Butm:MaskBtm6mm | SW3 |
| 1 | SW_DOWN2 | Butm:MaskBtm6mm | SW6 |
| 1 | SW_ENTER | Butm:MaskBtm5mmBh | SW54 |
| 1 | SW_K0 | Butm:MaskBtm4mmBh | SW16 |
| 1 | SW_K1 | Butm:MaskBtm4mmBh | SW7 |
| 1 | SW_K2 | Butm:MaskBtm4mmBh | SW8 |
| 1 | SW_K3 | Butm:MaskBtm4mmBh | SW9 |
| 1 | SW_K4 | Butm:MaskBtm4mmBh | SW10 |
| 1 | SW_K5 | Butm:MaskBtm4mmBh | SW11 |
| 1 | SW_K6 | Butm:MaskBtm4mmBh | SW12 |
| 1 | SW_K7 | Butm:MaskBtm4mmBh | SW13 |
| 1 | SW_K8 | Butm:MaskBtm4mmBh | SW14 |
| 1 | SW_K9 | Butm:MaskBtm4mmBh | SW15 |
| 1 | SW_KA | Butm:MaskBtm5mm | SW27 |
| 1 | SW_KB | Butm:MaskBtm5mm | SW40 |
| 1 | SW_KC | Butm:MaskBtm5mm | SW38 |
| 1 | SW_KCOM | Butm:MaskBtm5mm | SW43 |
| 1 | SW_KD | Butm:MaskBtm5mm | SW29 |
| 1 | SW_KDOT | Butm:MaskBtm5mm | SW44 |
| 1 | SW_KE | Butm:MaskBtm5mm | SW19 |
| 1 | SW_KF | Butm:MaskBtm5mm | SW30 |
| 1 | SW_KG | Butm:MaskBtm5mm | SW31 |
| 1 | SW_KH | Butm:MaskBtm5mm | SW32 |
| 1 | SW_KI | Butm:MaskBtm5mm | SW24 |
| 1 | SW_KJ | Butm:MaskBtm5mm | SW33 |
| 1 | SW_KK | Butm:MaskBtm5mm | SW34 |
| 1 | SW_KL | Butm:MaskBtm5mm | SW35 |
| 1 | SW_KM | Butm:MaskBtm5mm | SW42 |
| 1 | SW_KN | Butm:MaskBtm5mm | SW41 |
The 136 most common of 164 parts.
Questions
How big is the EL6170 Pro Max Plus PCB?
It measures 128 × 70.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EL6170 Pro Max Plus use?
164 parts, built around the ESP32-S3-WROOM-1U-N4, CH340K, CH334R and ME6211C33M5G-N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EL6170 Pro Max Plus KiCad files?
From the jsjsjsjsjsjsjson/EL6170_Pro_Max_Plus repository on GitHub, at the commit this page was made from: the board is EL6170_Pro_Max_Plus.kicad_pcb and its schematic EL6170_Pro_Max_Plus.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EL6170 Pro Max Plus design in my own project?
Its repository states no licence, so its author keeps all rights: ask jsjsjsjsjsjsjson before reusing the design.
Similar boards
- 4 layers50 × 50 mm
- 4 layers114.9 × 129.9 mm
- 2 layers65 × 56 mm
PiGarage
bryce-builds/PiGarage
Open-source Raspberry Pi power management and audio HAT for automotive head-unit use
79 parts9 - 4 layers121.9 × 109.2 mm
Plinkyblack hwmidi jacks
plinkysynth/plinky_public
a public release of the plinky sw and hw
287 parts227 - 4 layers130 × 105 mm
HomeDeck
Kilan777/HomeDeck
Jarvis HomeDeck: a Raspberry Pi CM4 carrier board and voice-assistant software for a 7-inch smart display (KiCad hardware, generated from Python, plus the Python/JS assistant)
228 parts1 - 2 layers129 × 81 mm
RP2350 PCBoard
riktw/RP2350B_BellsNWhistles_pcboard
Little board to turn a RP2350B BellsNWhistles into a personal computer
67 partsMIT - 4 layers51.1 × 94 mm
Das4-controller
brandonrc/das4-controller
Open-source RP2350B replacement controller board for the Das Keyboard 4 Professional (KiCad 10)
83 parts1MIT