Skip to the content
2 layersP CB, the printed circuit board in 3D

robot arm, currently a robotics related project for Hack Club Shenzhen’s fallout hackathon

Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
120
Pads
233
Tracks, vias
245, 3
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
20 Jun 2026
Updated
28 Jun 2026

Overview

P CB is an open-source printed circuit board by jshpatw, from the jshpatw/cbARM repository on GitHub. It is a 2-layer board with 28 parts on 120 nets, routed with 245 tracks and 3 vias.

It is built around the 74HC595. Its parts include 12 connectors, 7 capacitors and 2 ICs. It belongs with the robots and motor control boards of this library.

Main components

1

README

README.md

cbARM (Cheese Burger ARM)

A 5-DOF (Degrees of Freedom) robot arm designed for high scalability, low cost, and ease of assembly using common makerspace materials.

Copy of Chese burger(2)

Why did i make this?

I always wanted an interactable robotic arm. But, online, the cheap ones cant lift any substancial weight and the good ones are very unaffordable. Most arms also came in fixed sizes and usally had a short range of motion. By making this prodject, I hope to adress theese 3 problems.

Project Overview

The cbARM project aims to recreate industry-standard robot arm functionality using affordable, accessible components. By utilizing NEMA 17 motors, 3D-printed planetary gearboxes, a fully 3d printed conical stylle thrust bearing, and 2020 aluminum extrusions, this project provides a modular, affordable, and highly repairable alternative to commercial robotic systems.

Target Features

  • 5 Degrees of Freedom for full spatial maneuverability.
  • Accessible build requiring no specialized machining.
  • Modular design utilizing 2020 aluminum extrusions for variable arm lengths.
  • Modular electronics; using female sockets soldered onto the pcb for "hot swapping" and easy electronics replacement.
  • Scalable architecture for easy repair and upgrades.

Bill of Materials (BOM)

u can find the bom in the repo via BOM.csv

Assembly and CAD Files

All STL files required for 3D printing the chassis and planetary gearboxes are available in the /stl directory of this repository. Refer to the pictures in journal.md portion for more complex parts and to see how I went about making things

  • Recommended Material: PETG; 3 or more wall loops 20% minimum density 100% for gears and parts holding torque and gyroid pattern for structural rigidity and heat resistance (feel free to use PLA and other settings to test fitments).
  • Hardware: Ensure all M3 heat-set inserts are installed prior to joining arm segments.
  • Bearings: Ensure 10x5x4mm bearings are seated with light pressure to avoid binding within 3D-printed pockets.
  • Remember to practice safety when soldering parts and make sure to get extras and expect electronic defects.
image image Above is are pictures of the final PCB design for the prodject as of now. I reccomend using solder on female sockets to achive the electronic modularity. ensure u plug the 24V cables the right way as to not fry the board...

The J0 objects mainly feature:

  • Mounting holes for the 2020 extrution
  • A vertical mount for the nema 17 42HS60
  • 16:1 planetary reducers
  • A 160mm 16 pin thrust bearing inspired by Logic Planets work

He also has a youtube video in that link, I recommend watching his videos to better understand the mechanics and how to assemble that specific part.

The J1 objects feature:

  • A horizontal mount for the nema 17 hs 60 motor
  • A 64:1 planetary gearbox
  • Specialized thick gears to hendle the high torque setup
  • A ring gear with a 2020 extrution mount for torque output
image Above shows how the arm should look like after the 3d printed parts are assembled. (note that wires and electronics arent shown in this picture.

I made a document specially for assembly instructions at assembly guide.md in the repo for more in depth instructions and for the rest of the parts.

Firmware and Control

  • Status: Development in progress.
  • Firmware: To be updated.
  • Control Interface: To be updated.

DISCLAIMER: the code is still physically untested so joints may move not as intended

Future Roadmap

  • Integration of Inverse Kinematics (IK) libraries.
  • Development of end-effector/gripper attachments.
  • Optimization of planetary gearbox backlash and tolerances.

Extra info

  • The CAD softwares used to make the prodject are KiCad and Fusion360 on education license
  • Im using a p2s for prototyping and printing parts
  • I also used pla to test initial fitments and tolerances
  • I used old arduino code as reference and made the scripts on vs code and double checked with chatgpt

Links & sources:

Feedback

Im currently doing everything solo so im open for advice and would appreciate feedback regarding anything in the prodject.

License

This project is licensed under the MIT License.

Parts

28
QtyValueFootprintReferences
7C_PolarizedCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC1, C2, C3, C4, C5, C6, C7
7Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2, J4, J5, J6, J7, J8, J9
7Pololu_Breakout_A4988Module:Pololu_Breakout-16_15.2x20.3mmA1, A2, A3, A4, A5, A6, A7
274HC595Package_DIP:DIP-16_W7.62mm_SocketU1, U2
2Conn_01x19Connector_PinSocket_2.54mm:PinSocket_1x19_P2.54mm_VerticalJ12, J13
1Conn_01x02_PinTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_HorizontalJ11
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3
1Conn_02x02_Counter_ClockwiseConnector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_VerticalJ10

More from jshpatw/cbARM

1
  • 2 layers145.5 × 82.5 mmP CB, the printed circuit board in 3D

    P CB

    jshpatw/cbARM

    robot arm, currently a robotics related project for Hack Club Shenzhen’s fallout hackathon

    28 parts

Similar boards

  • 2 layers45.7 × 31.8 mmLEDx16 board, the printed circuit board in 3D

    LEDx16 board

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    36 parts803MIT
  • 2 layers228.6 × 100 mmMongus48, the printed circuit board in 3D

    Mongus48

    ChrisChrisLoLo/beyblock20

    The magnetic, modular, 20-key macropad that can join together to form an ortholinear board

    124 parts335GPL-3.0
  • 2 layers245.1 × 160 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-64x4-Home-Computer

    My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

    139 parts326
  • 2 layers100 × 95.1 mmProtoboard-6x4-breakout, the printed circuit board in 3D

    Protoboard-6x4-breakout

    electroniceel/protoboard

    Advanced protoboard layout with 1.27mm pitch for smd parts

    4,745 parts311CC-BY-4.0
  • 4 layers140 × 100 mmDc usv, the printed circuit board in 3D

    Dc usv

    TobleMiner/DC-UPS

    A small DC UPS, designed to keep small appliances like consumer network equipment running during power outages

    351 parts223CERN-OHL-P-2.0
  • 2 layers100.5 × 218.3 mmTraktorino, the printed circuit board in 3D

    Traktorino

    silveirago/traktorino

    The open-source DIY MIDI Controller for DJs.

    96 parts220
  • 2 layers287.8 × 126.7 mmNoName, the printed circuit board in 3D

    NoName

    AlaaSaadAbdo/battoota

    Keyboards

    267 parts188
  • 2 layers100 × 100 mmTommyPROM32-595, the printed circuit board in 3D

    TommyPROM32-595

    TomNisbet/TommyPROM

    Simple Arduino-based EEPROM programmer

    36 parts187

Questions

What parts does the P CB use?

28 parts, built around the 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the P CB KiCad files?

From the jshpatw/cbARM repository on GitHub, at the commit this page was made from: the board is P-CB/_restore_backup_2026-06-12T22-35-17-535/P-CB.kicad_pcb and its schematic P-CB/P-CB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the P CB design in my own project?

Its repository states no licence, so its author keeps all rights: ask jshpatw before reusing the design.