
P CB
jshpatw/cbARM
robot arm, currently a robotics related project for Hack Club Shenzhen’s fallout hackathon

robot arm, currently a robotics related project for Hack Club Shenzhen’s fallout hackathon
P CB is an open-source printed circuit board by jshpatw, from the jshpatw/cbARM repository on GitHub. It is a 2-layer board with 28 parts on 120 nets, routed with 245 tracks and 3 vias.
It is built around the 74HC595. Its parts include 12 connectors, 7 capacitors and 2 ICs. It belongs with the robots and motor control boards of this library.
A 5-DOF (Degrees of Freedom) robot arm designed for high scalability, low cost, and ease of assembly using common makerspace materials.
I always wanted an interactable robotic arm. But, online, the cheap ones cant lift any substancial weight and the good ones are very unaffordable. Most arms also came in fixed sizes and usally had a short range of motion. By making this prodject, I hope to adress theese 3 problems.
The cbARM project aims to recreate industry-standard robot arm functionality using affordable, accessible components. By utilizing NEMA 17 motors, 3D-printed planetary gearboxes, a fully 3d printed conical stylle thrust bearing, and 2020 aluminum extrusions, this project provides a modular, affordable, and highly repairable alternative to commercial robotic systems.
u can find the bom in the repo via BOM.csv
All STL files required for 3D printing the chassis and planetary gearboxes are available in the /stl directory of this repository. Refer to the pictures in journal.md portion for more complex parts and to see how I went about making things
The J0 objects mainly feature:
He also has a youtube video in that link, I recommend watching his videos to better understand the mechanics and how to assemble that specific part.
The J1 objects feature:
I made a document specially for assembly instructions at assembly guide.md in the repo for more in depth instructions and for the rest of the parts.
DISCLAIMER: the code is still physically untested so joints may move not as intended
Im currently doing everything solo so im open for advice and would appreciate feedback regarding anything in the prodject.
This project is licensed under the MIT License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | C_Polarized | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2, C3, C4, C5, C6, C7 |
| 7 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J4, J5, J6, J7, J8, J9 |
| 7 | Pololu_Breakout_A4988 | Module:Pololu_Breakout-16_15.2x20.3mm | A1, A2, A3, A4, A5, A6, A7 |
| 2 | 74HC595 | Package_DIP:DIP-16_W7.62mm_Socket | U1, U2 |
| 2 | Conn_01x19 | Connector_PinSocket_2.54mm:PinSocket_1x19_P2.54mm_Vertical | J12, J13 |
| 1 | Conn_01x02_Pin | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J11 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_02x02_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J10 |

jshpatw/cbARM
robot arm, currently a robotics related project for Hack Club Shenzhen’s fallout hackathon

tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

ChrisChrisLoLo/beyblock20
The magnetic, modular, 20-key macropad that can join together to form an ortholinear board

slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

electroniceel/protoboard
Advanced protoboard layout with 1.27mm pitch for smd parts

TobleMiner/DC-UPS
A small DC UPS, designed to keep small appliances like consumer network equipment running during power outages



28 parts, built around the 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jshpatw/cbARM repository on GitHub, at the commit this page was made from: the board is P-CB/_restore_backup_2026-06-12T22-35-17-535/P-CB.kicad_pcb and its schematic P-CB/P-CB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jshpatw before reusing the design.