

Led supply nucleo
Nice power factor corrected switching LED lighting driver.
- Size
- 70.7 × 134 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 86
- Nets
- 170
- Pads
- 435
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Jan 2021
- Updated
- 14 Jul 2024
Overview
Led supply nucleo is an open-source printed circuit board by jreeve-nl, from the jreeve-nl/led-supply repository on GitHub. It is a 4-layer board of 70.7 × 134 mm with 86 parts on 170 nets.
It is built around the UCC27714D, TL072 and IRLZ44N, with the BC848, FN 406-1-02 and SDR1307-681KL among its other parts. Its parts include 33 resistors, 18 capacitors, 15 diodes, 8 ICs and 8 transistors.
Main components
6UCC27714D
SOIC-14-40℃~+125℃ 1.2V~2.1V 1.7V~2.7V 10V~17V 125ns 125ns 15ns 15ns 2 4A 4A 750uA Half-Bridge IGBT、MOSFET Under Voltage Protection SOIC-14 Gate Drivers ROHSTexas InstrumentsGate DriversTL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational AmplifierIRLZ44N
TO-22055V 47A N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorisedBC848
SOT-23SOT-23 Bipolar (BJT) ROHSTDDBipolar (BJT)FN 406-1-02
L45 W15 H28Single Phase Ultra Compact EMC FilterSchaffnerUncategorisedSDR1307-681KL
SMD,13x13mm1.2A 1Ω 680uH 800mA ±10% SMD,13x13mm Power Inductors ROHSBournsPower Inductors
README
README.mdled-supply
Nice power factor corrected switching LED lighting driver
Parts
86| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +10 |
| 7 | D | Diode_SMD:D_1210_3225Metric_Pad1.42x2.65mm_HandSolder | D2, D3, D4, D5, D6, D9, D14 |
| 6 | C | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C5, C6, C10, C11, C12, C16 |
| 6 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C7, C8, C13, C14 |
| 6 | D_Schottky | Diode_SMD:D_1210_3225Metric_Pad1.42x2.65mm_HandSolder | D8, D10, D11, D12, D13, D15 |
| 6 | R | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R28, R29, R30, R31, R32, R33 |
| 4 | IRLZ44N | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q3, Q4, Q5, Q6 |
| 3 | CP | Capacitor_SMD:CP_Elec_10x12.5 | C4, C17, C18 |
| 3 | CP | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C3, C9, C15 |
| 3 | UCC27714D | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1, U3, U6 |
| 2 | BC848 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q7, Q8 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D7 |
| 2 | TL072 | Package_SO:SSOP-14_5.3x6.2mm_P0.65mm | U4, U5 |
| 1 | 744373965101 | kicad-footprint:744373965101 | L2 |
| 1 | ACS709xLFTR-6BB | Sensor_Current:Allegro_QSOP-24_3.9x8.7mm_P0.635mm | U2 |
| 1 | FN406-1-02 | Filter:Filter_Schaffner_FN406 | FL1 |
| 1 | LT3032-12 | Package_DFN_QFN:Linear_DE14MA | U8 |
| 1 | NUCLEO64-F411RE | Module:ST_Morpho_Connector_144_STLink | U7 |
| 1 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | SDR1307-681KL | kicad-footprint:SDR1307-681KL | L1 |
| 1 | Wuerth_750343373 | Transformer_THT:Transformer_Wuerth_750343373 | TR1 |
More from jreeve-nl/led-supply
1- 2 layers250 × 60 mm

Similar boards
- 4 layers135 × 92 mm

Mdx1
pingpongshow/MDX-1
Open multi-frequency + pulse-induction metal detector: KiCad hardware, search coil, portable-C firmware, iOS/Android apps. Experimental, unbuilt.
325 parts - 2 layers102.9 × 167.6 mm

- 2 layers40 × 108 mm

- 2 layers126 × 66.5 mm

- 2 layers76.2 × 40.6 mm

- 2 layers163 × 130 mm

- 4 layers180.3 × 114.9 mm

- 2 layers65 × 128.5 mm

MiniOSC
benjiaomodular/MiniOSC
A schmitt-trigger inverter based sawtooth and pulse oscillator module
82 parts36CC-BY-SA-4.0
Questions
How big is the Led supply nucleo PCB?
It measures 70.7 × 134 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Led supply nucleo use?
86 parts, built around the UCC27714D, TL072, IRLZ44N and BC848. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Led supply nucleo KiCad files?
From the jreeve-nl/led-supply repository on GitHub, at the commit this page was made from: the board is kicad/led-supply-nucleo/led-supply-nucleo.kicad_pcb and its schematic kicad/aux-supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Led supply nucleo design in my own project?
Its repository states no licence, so its author keeps all rights: ask jreeve-nl before reusing the design.