4 layers68.6 × 53.3 mm
Phyduino pico2
perc-sw/phyduino_pico2
CAD files for the student workshop Phyduino Pico2 Arduino IDE compatible board.
179 partsGPL-3.0
2 layers68.6 × 53.3 mm
Sassuino uno dip
jre/sassuinoArduino-like AVR development board
- Size
- 68.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.69 mm
- Parts
- 34
- Nets
- 53
- Pads
- 158
- Tracks, vias
- 447, 99
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Jun 2025
- Updated
- 15 Jun 2025
Overview
Sassuino uno dip is an open-source printed circuit board by jre, from the jre/sassuino repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 34 parts on 53 nets, routed with 447 tracks and 99 vias.
It is built around the MCP2200-I/SS, PPPC081LFBN-RC and CSTNE12M0GH5L000R0, with the KUSBEX-BSFS1N-B, PPPC041LFBN-RC and PPPC061LFBN-RC among its other parts. Its parts include 10 connectors, 8 capacitors, 7 resistors, 3 ICs and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
9
MCP2200-I/SS
SSOP-20-208mil-40℃~+85℃ 13mA 1mbps 3V~5.5V 9uA USB 2.0 USB to UART SSOP-20-208mil USB Converters ROHSMicrochip TechnologyUSB Converters
PPPC081LFBN-RC
插件,P=2.54mm-40℃~+105℃ 1 1x8P 2.54mm 250V 3A 8.51mm 8P Gold Phosphor bronze Square Hole Through Hole Top 插件,P=2.54mm Female Headers ROHSSullins Connector SolutionsFemale Headers
CSTNE12M0GH5L000R0
SMD3213-3P-40℃~+85℃ 12MHz 30Ω 33pF SMD3213-3P Ceramic Resonators ROHSMurataCeramic ResonatorsKUSBEX-BSFS1N-B
插件USB ConnectorsKycon
PPPC041LFBN-RC
插件,P=2.54mm-40℃~+105℃ 1 2.54mm 250V 3A 4P 8.51mm Gold Through Hole Plugin,P=2.54mm Female Headers ROHSSullins Connector SolutionsFemale HeadersPPPC061LFBN-RC
插件,P=2.54mmFemale HeadersSullins Connector SolutionsPPPC101LFBN-RC
插件,P=2.54mm-40℃~+105℃ 1 10P 1x10P 2.54mm 250V 3A 8.51mm Gold Phosphor bronze Square Hole Through Hole Top Plugin,P=2.54mm Female Headers ROHSSullins Connector SolutionsFemale Headers
PTS181216V050
1812-40℃~+85℃ 100A 100ms 150mΩ 16V 1Ω 350mA 700mA 800mW 1812 Resettable Fuses ROHSEatonResettable Fuses
SLW-883935-2A-D
插件插件 Slide Switches ROHSCUISlide Switches
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | Capacitor_SMD:C_1206_3216Metric | C1, C4, C5, C7, C8 |
| 3 | 1K | Resistor_SMD:R_1206_3216Metric | R4, R6, R7 |
| 3 | 315-47-104-41-001000 | 0SassuinoFP:PinSocket_1x04_P2.54mm_Vertical_LowProfile | J8, J9, J10 |
| 2 | 10K | Resistor_SMD:R_1206_3216Metric | R1, R3 |
| 2 | 1uF | Capacitor_SMD:C_1206_3216Metric | C3, C9 |
| 2 | PPPC081LFBN-RC | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4, J7 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C6 |
| 1 | 120R | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | 1825910-7 | 0SassuinoFP:SW4_1825910-B_TEC | SW1 |
| 1 | 330R | Resistor_SMD:R_1206_3216Metric | R5 |
| 1 | AUTO_RST_JP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | CSTNE12M0GH5L000R0 | 0SassuinoFP:OSC_CSTNE12M0GH5L000R0 | Y1 |
| 1 | ED3050-5-ND | 0SassuinoFP:DIP-28_W7.62mm_Socket_LongPads | U1 |
| 1 | ICSP_HDR | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | KUSBEX-BSFS1N-B | Connector_USB:USB_B_Lumberg_2411_02_Horizontal | J1 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | MCP2200 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U2 |
| 1 | PPPC041LFBN-RC | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | PPPC061LFBN-RC | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J5 |
| 1 | PPPC101LFBN-RC | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J6 |
| 1 | PTS181216V050 | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | SLW-883935-2A-D | 0SassuinoFP:SW_SLW-883935-2A-D | SW2 |
| 1 | TS4148 RAG | Diode_SMD:D_1206_3216Metric | D2 |
Similar boards
- 2 layers85.2 × 107.8 mm
- 4 layers50 × 50 mm
Watch wearable
TENNLab-UTK/NWRIST
Code and KiCAD PCB design for the NWRIST: Neuromorphic Wearable for Real-Time Intelligent Sensing Technology paper
79 parts - 2 layers54 × 45 mm
- 2 layers80 × 65 mm
- 4 layers150 × 130 mm
- 4 layers55.9 × 22.9 mm
Riotee Board
NessieCircuits/Riotee_Board
The Riotee board is a development board for battery-free wireless devices. The on-board wireless microcontroller runs off energy harvested from, for example, a solar panel and uses only tiny capacitors as energy…
83 parts15CERN-OHL-W-2.0 - 2 layers118 × 75.6 mm
Questions
How big is the Sassuino uno dip PCB?
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.69 mm thick.
What parts does the Sassuino uno dip use?
34 parts, built around the MCP2200-I/SS, PPPC081LFBN-RC, CSTNE12M0GH5L000R0 and KUSBEX-BSFS1N-B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sassuino uno dip KiCad files?
From the jre/sassuino repository on GitHub, at the commit this page was made from: the board is sassuino-uno-dip/sassuino-uno-dip.kicad_pcb and its schematic sassuino-uno-dip/sassuino-uno-dip.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sassuino uno dip design in my own project?
Its repository states no licence, so its author keeps all rights: ask jre before reusing the design.