Skip to the content
2 layers100 × 48 mmArduinoNanoDev, the printed circuit board in 3D

A monthly hardware meetup for anyone interested in electronics / hardware.

Size
100 × 48 mm
Copper layers
2
Thickness
1.6 mm
Parts
55
Nets
31
Pads
188
Tracks, vias
366, 4
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
22 Mar 2019
Updated
11 Nov 2019

Overview

ArduinoNanoDev is an open-source printed circuit board by joshajohnson, from the joshajohnson/CBRhardware repository on GitHub. It is a 2-layer board of 100 × 48 mm with 55 parts on 31 nets, routed with 366 tracks and 4 vias.

Its parts include 14 resistors, 11 connectors, 10 diodes and 3 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

README.md

Canberra Hardware Meetup

A monthly hardware meetup for anyone interested in electronics / hardware.

Held on the second Monday of each month, 6-8pm, at Infosect, 2/9 Beaconsfield Street, Fyshwick, 2609 ACT.

We'll cover topics such as PCB design / layout, embedded programming, tips and tricks to make hardware less hard, and everything in between.

All skill levels welcome, and feel free to bring along any projects you are working on or need a hand with as well.

If you have any suggestions about topics to discuss / changes to make, please get in touch.

11/11/19 - Test and Measurement

An unprepared talk on the wonderful world which is electronic test and measurement, discussing common tools, how they work, pitfalls, where to cheap out, and Josh's unsuccessful attempt at designing a VNA.

Future Events

DateTopic
11/11/19Test and Measurement

Past Events

DateTopic
8/4/19Intro to KiCad / How to design a PCB
13/5/19uC101: Intro to Microcontrollers / How to interface to the real world
10/6/19Breadboard to PC Board
8/7/19uC102: Embedded Communication Protocols / ADC
12/8/19Further PCB Design / Manufacturing / KiCad
9/9/19WTFpga Workshop
28/10/19More FPGA!

8/4/19 - Intro to KiCad / How to design a PCB

A workshop going over how to design a printed circuit board in KiCad.

Aimed at beginners who haven't designed many boards before, or folks who have design experience but haven't used KiCad much.

Feel free to bring a laptop with KiCad 5.1 installed if you want to design along, otherwise just come along and ask questions as we go. I would highly suggest bringing a mouse as well, as layout with a trackpad is not much fun.

The SAO101 folder contains resources which will be used on the night.

13/5/19 - uC101: Intro to Microcontrollers / How to interface with the real world

A workshop delving into the low level details of how you can use a microcontroller to interface with the physical world.

Will be going below the Arduino abstraction layer to directly interface with registers and peripherals on an ATmega328p, allowing us to interact with switches, rotary encoders, and LEDs.

You'll learn why buttons don't turn on just once when you press them and ways to get around this issue, along with how custom silicon on the chip can take the workload off your processor.

If time allows will also cover communication protocols and ADCs, however that will most likely be a different months topic.

Please bring along a laptop with the Arduino IDE installed, along with a Mini-USB cable to connect to the microcontroller with. Josh will have the installer files and spare USB cables on the night, but will not be enough for everyone. The uC101 folder contains resources which will be used.

10/6/19 - Breadboard to PC Board

Prototyped a circuit on a breadboard, and want to get it onto a printed cicruit board but not sure how? If so this talk is for you!
We will be going over how to to take a bunch of breakout boards with wires flying between them and get it onto a professional looking PCB.
Multiple common microcontrollers, breakout boards, and other handy components will be covered, allowing you to take your electronic design to the next level.

8/7/19 - uC102: Embedded Communication Protocols / ADC

Following on from uC101 in which the low level functions of a microcontroller were explored, this workshop will delve into how embedded devices communicate, along with touching on Analog to Digital Converters.

UART, SPI, I2C, and JTAG will all be discussed, along with writing code and communicating with UART, SPI, and I2C devices.

Please bring along a laptop with the Arduino IDE installed. Josh will have the installer files on the night as well. The uC102 folder contains resources which will be used.

12/7 8/19 - furtherPCB: PCB Design / Manufacturing / KiCad

A workshop delving into more detail about PCB design, including 4+ layer stack ups, impedance controlled traces and boards, layout tips, and looking at what the modern state of the art is in PCB manufacturing and assembly.

We will also discuss tools and how to use them to achieve the above mentioned design considerations, followed by looking at some of Josh's projects and identifying where these techniques have been utilised.

9/9/19 - WTFpga Workshop

2 hour crash course in FPGAs and Verilog.

Unlike most meetups where all you need to do is show up, this workshop will require software to be installed in advance and hardware to be acquired.

Have a read of the WTFpga Readme and let Josh know if there are any questions.

28/10/19 Topic: FPGA Workshop, continued.

Following on from the WTFpga workshop, we will discuss some of the key details about FPGA function, programming, debugging, and hopefully explain some of the questions which arose at the previous workshop.

Parts

55
QtyValueFootprintReferences
9LEDLED_THT:LED_D5.0mmD2, D3, D4, D5, D6, D7, D8, D9, D10
7330RResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR4, R5, R6, R7, R8, R9, R10
510KResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR1, R2, R3, R13, R14
4Conn_01x10uC101:PinHole_1x10_P2.54mm_VerticalJ5, J6, J7, J8
3Conn_01x04uC101:PinHole_1x04_P2.54mm_VerticalJ9, J10, J11
24K7Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR11, R12
2GNDTestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mmTP13, TP14
2SW_PushButton_Switch_THT:SW_PUSH_6mm_H4.3mmSW1(D2), SW2(D4)
110K PotuC101:PotentiometerAliExpressRV1(A6)
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1B1TestPoint:TestPoint_Pad_D1.0mmTP2
1B2TestPoint:TestPoint_Pad_D1.0mmTP4
1BLUETestPoint:TestPoint_Pad_D1.0mmTP10
1C1TestPoint:TestPoint_Pad_D1.0mmTP5
1C2TestPoint:TestPoint_Pad_D1.0mmTP6
1C3TestPoint:TestPoint_Pad_D1.0mmTP7
1C4TestPoint:TestPoint_Pad_D1.0mmTP8
1ENC_A(D8)TestPoint:TestPoint_Pad_D1.0mmTP3
1ENC_B(D7)TestPoint:TestPoint_Pad_D1.0mmTP1
1ENC_SW(D9)TestPoint:TestPoint_Pad_D1.0mmTP15
1GREENTestPoint:TestPoint_Pad_D1.0mmTP11
1I2C HeaderConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ3
1LED_RAGBLED_THT:LED_D5.0mm-4_RGBD1
1POTTestPoint:TestPoint_Pad_D1.0mmTP12
1REDTestPoint:TestPoint_Pad_D1.0mmTP9
1Rotary_Encoder_SwitchRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_CircularMountingHolesSW3
1SAO_ConnuC101:SAOJ4
1SPI HeaderConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ2
1Serial / UARTConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ1

More from joshajohnson/CBRhardware

3
  • 2 layers100.1 × 99.6 mmOutput.uc101panel, the printed circuit board in 3D

    Output.uc101panel

    joshajohnson/CBRhardware

    A monthly hardware meetup for anyone interested in electronics / hardware.

    114 parts4
  • 2 layersSAO101, the printed circuit board in 3D

    SAO101

    joshajohnson/CBRhardware

    A monthly hardware meetup for anyone interested in electronics / hardware.

    35 parts4
  • 2 layersSAO101, the printed circuit board in 3D

    SAO101

    joshajohnson/CBRhardware

    A monthly hardware meetup for anyone interested in electronics / hardware.

    35 parts4

Similar boards

  • 2 layers229.5 × 95.1 mmSweep high, the printed circuit board in 3D

    Sweep high

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    55 parts2.1k
  • 2 layers370 × 11 mmDaylight Disco XXL, the printed circuit board in 3D

    Daylight Disco XXL

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    55 parts1.1kGPL-3.0
  • 2 layers370 × 10 mmE3NGLEDstick, the printed circuit board in 3D

    E3NGLEDstick

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    55 parts915
  • 2 layers139.3 × 94.8 mmFlake, the printed circuit board in 3D

    Flake

    lever-tech/flake

    An open-source, wireless, split ergonomic keyboard designed to be productive, healthy, and enjoyable. [formerly Anywhy Flake]

    55 parts531CERN-OHL-W-2.0
  • 2 layers237.5 × 102.9 mmMemory, the printed circuit board in 3D

    Memory

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    55 parts301Unlicense
  • 2 layers60.6 × 24.1 mmBlep hackerboard, the printed circuit board in 3D

    Blep hackerboard

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    55 parts253GPL-3.0
  • 2 layers100 × 96.5 mmKeyboard ch552-36-lhs, the printed circuit board in 3D

    Keyboard ch552-36-lhs

    rgoulter/keyboard-labs

    Repo with my PCB designs and keyboard firmware

    55 parts236
  • 2 layers190.5 × 85.7 mmDissatisfaction30, the printed circuit board in 3D

    Dissatisfaction30

    dcpedit/dissatisfaction30

    To get the PCB manufactured, upload dissat-pcb.zip to JLCPCB, select your desired PCB color while keeping all the other default options, and place your order (minimum 5).

    55 parts147CC-BY-4.0

Questions

How big is the ArduinoNanoDev PCB?

It measures 100 × 48 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ArduinoNanoDev use?

55 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ArduinoNanoDev KiCad files?

From the joshajohnson/CBRhardware repository on GitHub, at the commit this page was made from: the board is uC101/Hardware/arduinoNanoDev.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ArduinoNanoDev design in my own project?

Its repository states no licence, so its author keeps all rights: ask joshajohnson before reusing the design.