2 layers80 × 40 mm
2 layers100 × 100 mm
PIC16F887EV
JoseCuretti/PIC16F887EV1- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 99
- Nets
- 81
- Pads
- 336
- Tracks, vias
- 873, 17
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 24 Sep 2023
- Updated
- 20 Feb 2024
Overview
PIC16F887EV is an open-source printed circuit board by JoseCuretti, from the JoseCuretti/PIC16F887EV repository on GitHub. It is a 2-layer board of 100 × 100 mm with 99 parts on 81 nets, routed with 873 tracks and 17 vias.
It is built around the PIC16F887-I/PT, FT230XS-R and LTS-6980HR. Its parts include 14 resistors, 6 diodes, 6 transistors, 3 capacitors and 2 ICs. It belongs with the PIC boards of this library.
Main components
3
PIC16F887-I/PT
TQFP-44(10x10)-40℃~+85℃ 10bit 14KB 20MHz 256Byte 2V~5.5V 35 368Byte 8 Bit Built-in FLASH PIC TQFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
FT230XS-R
SSOP-16-150mil-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART SSOP-16-150mil USB Converters ROHSFTDIUSB Converters
LTS-6980HR
DIP-100.56 1 19.05mmx12.6mmx8mm 7 Segment 75mW Common Cathode Red DIP-10 LED Segment Displays ROHSLite-OnLED Segment Displays
README
README.mdPIC16F887EV
Parts
99| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | SW_Push | GitHub:SW_TS04-66-43-BK-100-SMT | RESET1, SW1, SW2, SW3, SW4, SW5, SW6, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18 +3 |
| 14 | 220R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | Ra1, Ra2, Ra3, Ra4, Ra5, Ra6, Ra7, Ra8, RD1, RD2, RD3, RP3, RP4, RP11 |
| 10 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R7, R8, R9, RP8, RP10 |
| 6 | 2N3904 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q2, Q3, Q5, QP1, QP2 |
| 6 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3, LED1, LED2, LED3 |
| 4 | 4.7k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6, RD4, RD5, RD12 |
| 4 | 47pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | CP2, CP3, CP7, CP8 |
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | REF1, REF2, REF3, REF4 |
| 3 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7, CP4, CP6 |
| 3 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | POWER1, SPI1, USART1 |
| 3 | LTS-6980HR | Display_7Segment:7SegmentLED_LTS6760_LTS6780 | AFF1, AFF3, AFF4 |
| 2 | 27R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | RP1, RP2 |
| 2 | Jumper_2_Bridged | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2 |
| 2 | LOGO | Libreria_Propia:unc_logo_8x11mm | G***, G*** |
| 2 | Logo | Taller:Logo | TCdE FCEFYN, TCdE FCEFYN |
| 1 | 10M | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | RY1 |
| 1 | 10nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | CP1 |
| 1 | 1K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | RP9 |
| 1 | 2K2 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | RP5 |
| 1 | 3K3 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | RP6 |
| 1 | 4,7uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | CP5 |
| 1 | 4K7 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | RP7 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_ProSignal_ABT-410-RC | BZ1 |
| 1 | Conn_01x05_Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | ICSP1 |
| 1 | Crystal | Crystal:Crystal_HC18-U_Vertical | Y1 |
| 1 | FT230XS | Package_SO:SSOP-16_3.9x4.9mm_P0.635mm | U2 |
| 1 | FerriteBead | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 1 | PIC16F887-IP | Package_DIP:DIP-40_W15.24mm_LongPads | U1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Bourns_3299W_Vertical | RV1 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | P1 |
Similar boards
- 2 layers96.5 × 99.1 mm
- 2 layers558.8 × 88.9 mm
- 2 layers77.4 × 65.2 mm
- 2 layers170 × 55 mm
Protector de Tesoro
edgranzella/Protector-de-Tesoro
Este repositorio contiene el diseño de hardware y la placa de circuito impreso (PCB) desarrollado en KiCad para el módulo central del Protector de Tesoro.
88 parts - 2 layers53 × 55.5 mm
RFID Siralama Karti
emrebrbr/RFID-Door-System-with-PIC16F887
Smart security door PIC16F887 based RFID (RC522) solution.
12 partsMIT - 2 layers
ControlTemp
fernandorasta99/PROYECTO-FINAL
Los puntos a destacar son: Realizar una placa de circuito impreso con los módulos que se utilizarán en el proyecto, para ello, es libre de realizar el diseño como mejor le convenga Puede utilizar cualquier software de…
9 parts - 2 layers160 × 100 mm
Questions
How big is the PIC16F887EV PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PIC16F887EV use?
99 parts, built around the PIC16F887-I/PT, FT230XS-R and LTS-6980HR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PIC16F887EV KiCad files?
From the JoseCuretti/PIC16F887EV repository on GitHub, at the commit this page was made from: the board is PIC16F887EV.kicad_pcb and its schematic PIC16F887EV.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PIC16F887EV design in my own project?
Its repository states no licence, so its author keeps all rights: ask JoseCuretti before reusing the design.