Skip to the content
2 layers140 × 140 mmStratosphericBalloonPCB, the printed circuit board in 3D

StratosphericBalloonPCB

josamue/StratoPi
Size
140 × 140 mm
Copper layers
2
Thickness
1.67 mm
Parts
41
Nets
75
Pads
185
Tracks, vias
291, 16
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
27 Apr 2025
Updated
28 Apr 2025

Overview

StratosphericBalloonPCB is an open-source printed circuit board by josamue, from the josamue/StratoPi repository on GitHub. It is a 2-layer board of 140 × 140 mm with 41 parts on 75 nets, routed with 291 tracks and 16 vias.

It is built around the BME280. Its parts include 9 connectors and 7 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

Parts

41
QtyValueFootprintReferences
4MountingHole_PadMountingHole:MountingHole_2.2mm_M2_DIN965_PadH1, H2, H3, H4
1AHT10/BMP280AHT10:AHT10BreakoutU5
1AddressJumperJumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mmJP3
1ArduinoNano3V3Module:Arduino_NanoA1
1BME280Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ1
1CO2SensorConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ3
1Connect3V3_JMPJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP4
1ConnectRX_JMPJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP5
1ConnectSCL_JMPJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP2
1ConnectSDA_JMPJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1
1DS1307_RTCDS1307:DS1307 ModuleU2
1GPS-SensorGY-GPS6MV2:NEOM8N-BreakoutU6
1GeigerCounterConnector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ5
1GyroMPU6050GY-521:GY-521_1U3
1I2C-Sen1Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ9
1I2C-Sen2Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ8
1LoRa-ModuleSX1278_LoRa:SX1278_LoRaU7
1MicroSDReaderMicroSDBoard:MicroSDReaderU4
1OzoneSensorConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ2
1PM-SensorConnector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_VerticalJ7
1PWR-INConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ6
1PressureSensorConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ4
1Raspberry PiRPI4:RaspberryPi4bU1

The 26 most common of 41 parts.

Similar boards

  • 2 layers70.1 × 43.2 mmIaq device, the printed circuit board in 3D

    Iaq device

    nkitanov/iaq_board

    IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

    19 parts396
  • 4 layers38.6 × 39.5 mmRuuvitag revb71, the printed circuit board in 3D

    Ruuvitag revb71

    ruuvi/ruuvitag_hw

    RuuviTag hardware projects

    64 parts115
  • 4 layers35.1 × 76.3 mmTiny4FSK, the printed circuit board in 3D

    Tiny4FSK

    New-England-Weather-Balloon-Society/Tiny4FSK

    Horus Binary v2 HAB Tracker

    90 parts96CERN-OHL-W-2.0
  • 2 layers29.8 × 33.7 mmPecanpico9, the printed circuit board in 3D

    Pecanpico9

    DL7AD/pecanpico9

    A lightweight APRS tracker for balloons

    116 parts68GPL-3.0
  • 2 layers136 × 100 mmClimateSprinklerController, the printed circuit board in 3D

    ClimateSprinklerController

    kbx81/ClimateSprinklerController

    ESP32-based climate and sprinkler controller for use with ESPHome

    194 parts56
  • 4 layers36.6 × 60.3 mmStratoSoar MK3.0, the printed circuit board in 3D

    StratoSoar MK3.0

    crnicholson/StratoSoar-MK3

    StratoSoar MK3, an autonomous glider meant for high-altitudes, accessible to everyone

    85 parts43
  • 2 layers23 × 50 mmPecanpico10, the printed circuit board in 3D

    Pecanpico10

    DL7AD/pecanpico10

    A lightweight APRS tracker and digipeater

    123 parts43
  • 2 layers97 × 77.5 mmESPlant, the printed circuit board in 3D

    ESPlant

    CCHS-Melbourne/ESPlant

    Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266

    77 parts37

Questions

How big is the StratosphericBalloonPCB PCB?

It measures 140 × 140 mm and has 2 copper layers, 1.67 mm thick.

What parts does the StratosphericBalloonPCB use?

41 parts, built around the BME280. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the StratosphericBalloonPCB KiCad files?

From the josamue/StratoPi repository on GitHub, at the commit this page was made from: the board is pcb/StratosphericBalloonPCB.kicad_pcb and its schematic pcb/StratosphericBalloonPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the StratosphericBalloonPCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask josamue before reusing the design.