2 layers30.5 × 53.3 mm LAN Module-1P, the printed circuit board in 3D

LAN Module-1P

Compact ESP32 PoE dev board

Size: 30.5 × 53.3 mm
Copper layers: 2
Thickness: 1.6 mm
Parts: 62
Nets: 87
Pads: 303
Tracks, vias: 625, 46
Routed: Yes
KiCad: KiCad 6 (file 20211014)
Created: 28 Feb 2025
Updated: 16 Mar 2025

Overview

LAN Module-1P is an open-source printed circuit board by jorticus, from the jorticus/esp32-poe-dev repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 30.5 × 53.3 mm with 62 parts on 87 nets, routed with 625 tracks and 46 vias.

It is built around the ESP32-U4WDH and LV2842XLVDDCR-JSM. Its parts include 23 capacitors, 19 resistors, 4 ICs, 4 diodes and 4 inductors. It belongs with the ESP32 boards of this library.

Main components

README

README.md

ESP32 PoE Dev Board

A simple ESP32 ethernet + PoE dev board

PoE Dev Board

WARNING: PoE is NOT ISOLATED! Be careful what you attach.

See jared.geek.nz/esp32-poe-devboard for the story.

Usage

ESPHome

yaml

esp32:
  board: esp32dev

ethernet:
  type:     RTL8201
  mdc_pin:  GPIO23
  mdio_pin: GPIO18
  clk_mode: GPIO0_OUT
  phy_addr: 0

...

Arduino

main.cpp

cpp

void setup() {
    // WiFi antenna not available on this board
    WiFi.mode(WIFI_OFF); 

    ETH.begin();
    ETH.config();
}

platformio.ini

ini

[platformio]

[env:esp32_poe]
platform  = espressif32
framework = arduino
board     = esp32_dev
build_flags = 
    -DETH_PHY_ADDR=0
    -DETH_PHY_MDC=23
    -DETH_PHY_MDIO=18
    -DETH_PHY_TYPE=ETH_PHY_RTL8201
    -DETH_CLK_MODE=ETH_CLOCK_GPIO0_OUT

Parts

Qty	Value	Footprint	References
8	100n	Capacitor_SMD:C_0603_1608Metric	C1, C5, C6, C7, C17, C19, C22, C23
7	10k	Resistor_SMD:R_0603_1608Metric	R1, R5, R6, R10, R11, R12, R15
4	FM240W	Diode_SMD:D_SOD-123	D1, D2, D4, D5
3	1u	Capacitor_SMD:C_0603_1608Metric	C2, C8, C9
2	0R	Resistor_SMD:R_0603_1608Metric	R18, R19
2	10n	Capacitor_SMD:C_0603_1608Metric	C14, C16
2	10u	Capacitor_SMD:C_0603_1608Metric	C3, C4
2	10uH 1A	Inductor_SMD:L_Taiyo-Yuden_NR-40xx	L2, L4
2	2.2u	Capacitor_SMD:C_0603_1608Metric	C18, C21
2	22p	Capacitor_SMD:C_0603_1608Metric	C10, C11
2	2N7002	Package_TO_SOT_SMD:SOT-23	Q1, Q2
2	3.3n	Capacitor_SMD:C_0603_1608Metric	C13, C15
2	499R	Resistor_SMD:R_0603_1608Metric	R7, R8
2	FB 600R@100MHz 1.3A	Resistor_SMD:R_0603_1608Metric	L1, L3
1	10K	Resistor_SMD:R_0603_1608Metric	R9
1	10k 1%	Resistor_SMD:R_0603_1608Metric	R17
1	2.49k 1%	Resistor_SMD:R_0603_1608Metric	R4
1	20K	Resistor_SMD:R_0603_1608Metric	R3
1	22k	Resistor_SMD:R_0603_1608Metric	R13
1	2k	Resistor_SMD:R_0603_1608Metric	R2
1	33k 1%	Resistor_SMD:R_0603_1608Metric	R16
1	4.7u	Capacitor_SMD:C_Elec_3x5.4	C24
1	4.7u	Capacitor_SMD:C_0603_1608Metric	C12
1	40MHz ±10ppm	Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm	Y1
1	47k	Resistor_SMD:R_0603_1608Metric	R14
1	ANT	Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical	J1
1	CP2102N-Axx-xQFN24	Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm	U4
1	Conn_Left	Visclib:ProtoCastellatedHeader_1x16	J4
1	Conn_Right	Visclib:ProtoCastellatedHeader_1x16	J5
1	ESP32-U4WDH	Visclib:ESP32-REDUCED	U1
1	LV2842XLVDDCR	Package_TO_SOT_SMD:SOT-23-6	U3
1	Logo	Visclib:wolfpaw-0.3	LOGO1
1	RESET	Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK	SW1
1	W25Q32	Package_SO:SOIC-8_5.23x5.23mm_P1.27mm	U2

Questions

How big is the LAN Module-1P PCB?

It measures 30.5 × 53.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LAN Module-1P use?

62 parts, built around the ESP32-U4WDH and LV2842XLVDDCR-JSM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LAN Module-1P KiCad files?

From the jorticus/esp32-poe-dev repository on GitHub, at the commit this page was made from: the board is LAN-Module-1P.kicad_pcb and its schematic LAN-Module-1P.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LAN Module-1P design in my own project?

Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

Category and platform

ESP32

Project files

Show this board on your page

A live frame, for any web page

<iframe src="https://pcbkit.io/embed/boards/jorticus-esp32-poe-dev-lan-module-1p" title="LAN Module-1P in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

A picture

<img src="https://pcbkit.io/embed/boards/jorticus-esp32-poe-dev-lan-module-1p.jpg" alt="LAN Module-1P" width="1200" height="900">

A picture that opens the board, for a README

[![LAN Module-1P](https://pcbkit.io/embed/boards/jorticus-esp32-poe-dev-lan-module-1p.jpg?size=s)](https://pcbkit.io/boards/jorticus-esp32-poe-dev-lan-module-1p)

Source

Repository: jorticus/esp32-poe-dev
Board file: LAN-Module-1P.kicad_pcb
Commit: 093c4ad
Licence: CERN-OHL-S-2.0

Similar boards

4 layers56 × 43.3 mm
StepperServoCAN
dzid26/StepperServo-hardware
Stepper actuator controller
155 parts29GPL-3.0
8 layers38 × 38 mm
Kolibri v0.5
bastian2001/Kolibri-FC-Hardware
Hardware for the Kolibri Flight Controller. 30mm/20mm FC with RP2350 + ELRS onboard
221 parts8GPL-3.0
4 layers33.5 × 33.5 mm
Esp32-led
t3mschm2d/esp32-tiny-led-controller
The main goal of this project is to develop an OpenHardware board for controlling digital LED strips. The control shall be done via Homeassistant and esphome.The PCB is based around an ESP32-U4WDH microcontroller and…
29 parts2
2 layers139.3 × 113.8 mm
Flake L
lever-tech/flake
An open-source, wireless, split ergonomic keyboard designed to be productive, healthy, and enjoyable. [formerly Anywhy Flake]
62 parts531CERN-OHL-W-2.0
2 layers97 × 78.5 mm
Dumbpad
imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro
62 parts517GPL-2.0
2 layers60 × 37 mm
HydraBus
hydrabus/hydrabus
HydraBus open source multi-tool for anyone interested in learning/developping/debugging/hacking/Penetration Testing for basic or advanced embedded hardware
62 parts359
2 layers90 × 50 mm
Tomu fpga
im-tomu/fomu-hardware
Tomu FPGA (Fomu for short), a FPGA which fits inside your USB port!
62 parts236CC-BY-SA-4.0
2 layers118 × 103.5 mm
EV Charger2
fotherja/EV_Charger
Arduino Uno Code for EV Charger
62 parts167MIT