8 layers38 × 38 mm
Kolibri v0.5
bastian2001/Kolibri-FC-Hardware
Hardware for the Kolibri Flight Controller. 30mm/20mm FC with RP2350 + ELRS onboard
221 parts8GPL-3.0
4 layers33.5 × 33.5 mm
Esp32-led
t3mschm2d/esp32-tiny-led-controller2The main goal of this project is to develop an OpenHardware board for controlling digital LED strips. The control shall be done via Homeassistant and esphome.The PCB is based around an ESP32-U4WDH microcontroller and…
- Size
- 33.5 × 33.5 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 29
- Nets
- 68
- Pads
- 181
- Tracks, vias
- 203, 43
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 23 Nov 2022
- Updated
- 29 Jan 2023
Overview
Esp32-led is an open-source printed circuit board by t3mschm2d, from the t3mschm2d/esp32-tiny-led-controller repository on GitHub. It is a 4-layer board of 33.5 × 33.5 mm with 29 parts on 68 nets, routed with 203 tracks and 43 vias.
It is built around the ESP32-U4WDH, AMS1117-3.3 and MUN5211DW1, with the SP0503BAHTG among its other parts. Its parts include 9 capacitors, 7 resistors, 3 ICs, 3 connectors and 1 diode. It belongs with the ESP32 boards of this library.
Main components
4
ESP32-U4WDH
QFN-48-EP(5x5)-40℃~+105℃ -98dBm 130mA 150Mbps 2.3V~3.6V 2.412GHz~2.484GHz 2.4GHz 20.5dBm 95mA Bluetooth、WiFi SPI、UART、ADC、I2C、I2S、PWM、PCM、SDIO transceiver QFN-48-EP(5x5) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICs
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MUN5211DW1
SOT-363-55℃~+150℃ 1 1.2V 100mA 100nA 13kΩ 2 NPN (Pre-Biased) 200mV 250mV 256mW 2V 35 50V NPN SOT-363 Digital Transistors ROHSonsemiDigital Transistors
SP0503BAHTG
SOT-143-55℃~+125℃ 10A@8/20us 14V 150W@8/20us 30pF、60pF 5.5V 6V 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdESP32-Tiny-LED-Controller
Overview
The main goal of this project is to develop an OpenHardware board for controlling digital LED strips. The control shall be done via Homeassistant and esphome.The PCB is based around an ESP32-U4WDH microcontroller and includes the following features:
- 2,4GHz antenna for WLAN / Bluetooth
- 5 pin screw terminal for external power and the LED-strip
- USB-C connector
- USB-to-UART converter
- JST PH-S4B for connecting external sensors
ToDos
This PCB is a work in progress. The latest design is not tested and verified.
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C9 |
| 2 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C4, C8 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 10p | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 10u | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 1n | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 499R | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 5.11K | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 5.11k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 8p | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | CP2102N-Axx-xQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | ESP32-U4WDH | ESP32-U4WDH:QFN35P500X500X90-49N-D | IC1 |
| 1 | JST-PH-4 | Connector_JST:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | J3 |
| 1 | MUN5211DW1 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
| 1 | SP0503BAHT | Package_TO_SOT_SMD:SOT-143 | D1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | Screw_Terminal_01x05 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-5-5.08_1x05_P5.08mm_Horizontal | J2 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_JAE_DX07S016JA1R1500 | J1 |
| 1 | YAGEO_ANT3216LL00R2400A | RF_Antenna:YAGEO_ANT3216LL00R2400A | A1 |
Questions
How big is the Esp32-led PCB?
It measures 33.5 × 33.5 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Esp32-led use?
29 parts, built around the ESP32-U4WDH, AMS1117-3.3, MUN5211DW1 and SP0503BAHTG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32-led KiCad files?
From the t3mschm2d/esp32-tiny-led-controller repository on GitHub, at the commit this page was made from: the board is pcb/v1.0/esp32-led.kicad_pcb and its schematic pcb/v1.0/esp32-led.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32-led design in my own project?
Its repository states no licence, so its author keeps all rights: ask t3mschm2d before reusing the design.
Similar boards
- 2 layers25.3 × 61 mm
- 4 layers40 × 55 mm
CopterCat cm4
matveylapin/CopterCat_cm4
Полётный контроллер для стандарта FMU-v6u. Обычно на дронах для программирования устанавливают полётный контроллер, одноплатный компьютер и иногда arduino.
164 parts3Apache-2.0 - 4 layers100 × 70.5 mm
Smart Irrigation SystemV2
Benedikt3141/Smart-Irrigation-System
A smart irrigation system for irrigation of up to 6 plants. It monitors the moisture, temperature, CO2 concentration, air quality ... and displays the data on a 2.4" TFT Display using an ESP32 DevKit C as processor.
147 parts1MIT - 2 layers41.5 × 19 mm
Pwm fan control
Duckle29/PWM-to-fan
A small board for controlling two DC fans from an open-drain inverted PWM output.
28 parts1MIT - 2 layers160 × 70.3 mm
Gamegirl
Samprab06/ESAP-Tetris
Tetris implementation for the ESP32 microcontroller with integrated audio support, TFT display rendering, and SD card file access.
60 parts - 2 layers26.5 × 55.5 mm
Cgf.CameraControl.Hardware
sensslen/Cfg.CameraControl.Hardware
Hardware needed to control a lanc camera with a PTZ head
30 partsMIT - 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0