Skip to the content
2 layers76.5 × 21.3 mmGenerator, the printed circuit board in 3D
Size
76.5 × 21.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
24
Nets
15
Pads
64
Tracks, vias
82, 0
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
31 Mar 2016
Updated
1 Dec 2024

Overview

Generator is an open-source printed circuit board by jonronen, from the jonronen/kicad-stuff repository on GitHub. It is a 2-layer board of 76.5 × 21.3 mm with 24 parts on 15 nets, routed with 82 tracks and 0 vias.

It is built around the PN2222A. Its parts include 7 diodes, 5 resistors, 2 capacitors, 2 transistors and 2 connectors.

Main components

1

README

README.md

kicad-stuff

Parts

24
QtyValueFootprintReferences
5RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR1, R2, R3, R4, R5
3LEDLED_THT:LED_D4.0mmD11, D12, D13
2D_Bridge_+A-Amy_shit:DiodeBridgeD2, D3
2PN2222APackage_TO_SOT_THT:TO-18-3Q1, Q2
1100uFCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC1
11FCapacitor_THT:CP_Radial_D10.0mm_P5.00mm_P7.50mmC2
11N5817Diode_THT:D_DO-15_P3.81mm_Vertical_AnodeUpD1
1Conn_01x02_MaleConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ1
1Conn_01x04_MaleConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ2
1L_Core_Ferrite_CoupledInductor_THT:Choke_Schaffner_RN204-04-9.0x14.0mmL1
1SW_SPSTConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalSW1
1ZPYxxDiode_THT:D_DO-15_P3.81mm_Vertical_AnodeUpD10

The 20 most common of 24 parts.

More from jonronen/kicad-stuff

11
  • 2 layers87.1 × 51.3 mmMill music, the printed circuit board in 3D

    Mill music

    jonronen/kicad-stuff

    55 parts1
  • 2 layers63.5 × 45.5 mmPwm tl494cn, the printed circuit board in 3D

    Pwm tl494cn

    jonronen/kicad-stuff

    43 parts1
  • 2 layers91.8 × 54.1 mmTonemender2, the printed circuit board in 3D

    Tonemender2

    jonronen/kicad-stuff

    41 parts1
  • 2 layers128.3 × 47.6 mmPlus minus 12v, the printed circuit board in 3D

    Plus minus 12v

    jonronen/kicad-stuff

    35 parts1
  • 2 layers61 × 43.2 mmPseudo reverb, the printed circuit board in 3D

    Pseudo reverb

    jonronen/kicad-stuff

    32 parts1
  • 2 layers90.8 × 38.1 mmTonemender, the printed circuit board in 3D

    Tonemender

    jonronen/kicad-stuff

    30 parts1
  • 2 layers64 × 36.1 mmMic preamp, the printed circuit board in 3D

    Mic preamp

    jonronen/kicad-stuff

    29 parts1
  • 2 layers53.3 × 44.7 mmRaspi audio, the printed circuit board in 3D

    Raspi audio

    jonronen/kicad-stuff

    28 parts1
  • 2 layers54.6 × 21.6 mmGenerator, the printed circuit board in 3D

    Generator

    jonronen/kicad-stuff

    26 parts1
  • 2 layers53.8 × 29.8 mmRgb led, the printed circuit board in 3D

    Rgb led

    jonronen/kicad-stuff

    16 parts1

Similar boards

  • 2 layers152.4 × 101.6 mm8088-FE2010A SBC, the printed circuit board in 3D

    8088-FE2010A SBC

    skiselev/micro_8088

    Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset

    72 parts412GPL-3.0
  • 2 layers33.7 × 66 mmSmartbell, the printed circuit board in 3D

    Smartbell

    Staacks/there.oughta.be

    Projects featured on my blog at https://there.oughta.be

    27 parts108GPL-3.0
  • 4 layers100 × 100 mm2063-Z80, the printed circuit board in 3D

    2063-Z80

    Z80-Retro/2063-Z80

    Retro Z80 CPU Board

    86 parts96
  • 2 layers30.7 × 76.1 mmRepeater v2, the printed circuit board in 3D

    Repeater v2

    plusvic/simplebus2-intercom

    General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.

    17 parts95CC0-1.0
  • 2 layers28.8 × 43.8 mmAdv pcb, the printed circuit board in 3D

    Adv pcb

    Vail-CW/vail-adapter

    Adapter for cw morse keys to USB

    13 parts81MIT
  • 2 layers23.2 × 52.1 mmOpenC64Saver, the printed circuit board in 3D

    OpenC64Saver

    SukkoPera/OpenC64Saver

    Protect your Commodore 64 from killer power supplies!

    17 parts79
  • 4 layers184.2 × 169.5 mmSB mini II, the printed circuit board in 3D

    SB mini II

    simonboak/SB-mini-II

    A homebrewed Apple II clone

    97 parts76MIT
  • 2 layers49.5 × 30 mmAirpcb smd old, the printed circuit board in 3D

    Airpcb smd old

    issalig/toshiba_air_cond

    AB protocol decoder for toshiba air conditioners

    30 parts65

Questions

How big is the Generator PCB?

It measures 76.5 × 21.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Generator use?

24 parts, built around the PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Generator KiCad files?

From the jonronen/kicad-stuff repository on GitHub, at the commit this page was made from: the board is supercap_generator/generator.kicad_pcb and its schematic pseudo_reverb/pseudo_reverb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Generator design in my own project?

Its repository states no licence, so its author keeps all rights: ask jonronen before reusing the design.