
CyberKeeb2040
zli117/CyberKeeb2040
Hardware design for a mechanical keyboard based on RP2040 that also has a Pi Zero onboard.

I have included (or borrowed shamelessly) from the following sources:
Pico color picker is an open-source printed circuit board by jonpspri, from the jonpspri/pico-color-picker repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 94.1 × 58 mm with 17 parts on 53 nets, routed with 170 tracks and 27 vias.
It is built around the WS2812. Its parts include 5 switches, 3 capacitors, 3 resistors, 3 diodes and 2 ICs. It belongs with the RP2040 boards of this library.
I have included (or borrowed shamelessly) from the following sources:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1 µF | Capacitor_SMD:C_0201_0603Metric | C1, C2, C3 |
| 3 | 150 Ω | Resistor_SMD:R_0402_1005Metric | R1, R2, R3 |
| 3 | WS2812 | LED_SMD:LED_WS2812_PLCC6_5.0x5.0mm_P1.6mm | D1, D2, D3 |
| 2 | Button | Button_Switch_THT:SW_PUSH-12mm | SW4, SW5 |
| 1 | AdaFruit_4440 | AdaFruit:AdaFruit_4440 | U2 |
| 1 | Blue | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | Conn_01x04 | Connector_PinSocket_2.50mm:PinSocket_1x04_P2.50mm_Vertical | J1 |
| 1 | Green | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW2 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
| 1 | Red | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW3 |

zli117/CyberKeeb2040
Hardware design for a mechanical keyboard based on RP2040 that also has a Pi Zero onboard.

ryomuk/TangNanoDCJ11MEM
Memory system and UART implemented on Tang Nano 20K for DEC DCJ11 PDP-11 Processor


cherry-embedded/HSCanT-hardware
HSCanT is a USB to 4-channel CAN FD tool designed based on the HPM5321 chip.

Duckle29/Vitamins-included
This repo holds a variation of the lets split. This board requires no soldering



It measures 94.1 × 58 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the WS2812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jonpspri/pico-color-picker repository on GitHub, at the commit this page was made from: the board is cad/pico-color-picker.kicad_pcb and its schematic cad/pico-color-picker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).