2 layers114 × 57 mm
Carte puissance
INSA-GEI/insa-nxpcup
Dépôt du département GEI de l'INSA Toulouse pour la compétition NXPCup
63 parts9GPL-3.0
2 layers20.1 × 41.9 mm
Bbot
jonbinney/bbot- Size
- 20.1 × 41.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 9
- Pads
- 38
- Tracks, vias
- 46, 8
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 23 Aug 2015
- Updated
- 28 May 2019
Overview
Bbot is an open-source printed circuit board by jonbinney, from the jonbinney/bbot repository on GitHub. It is a 2-layer board of 20.1 × 41.9 mm with 15 parts on 9 nets, routed with 46 tracks and 8 vias.
It is built around the BTN8982TA. Its parts include 5 capacitors, 4 resistors, 1 IC and 1 connector.
Main components
1Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C7, C10 |
| 2 | 10k | Resistors_SMD:R_0805_HandSoldering | R10, R13 |
| 2 | 220nF | Capacitors_SMD:C_0805_HandSoldering | C1, C4 |
| 1 | 0.51k | Resistors_SMD:R_0805_HandSoldering | R5 |
| 1 | 1k | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 1nF | Capacitors_SMD:C_0805_HandSoldering | C2 |
| 1 | BTN8982TA | bbot_footprints:BTN8982 | U1 |
| 1 | CONN_01X04 | w_conn_df13:df13-4p-125h | P3 |
The 11 most common of 15 parts.
Questions
How big is the Bbot PCB?
It measures 20.1 × 41.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bbot use?
15 parts, built around the BTN8982TA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bbot KiCad files?
From the jonbinney/bbot repository on GitHub, at the commit this page was made from: the board is bb/half_bridge/half_bridge/bbot.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bbot design in my own project?
Its repository states no licence, so its author keeps all rights: ask jonbinney before reusing the design.
Similar boards
- 2 layers66.8 × 42.4 mm
KiCad CAN motor driver
wjklimek1/CAN_motor_controller
H-bridge for DC motor controlled by CAN or PWM
78 parts7MIT - 2 layers50.3 × 45 mm
Titancore-7960 industrial
Glitch-Out-Hardware/TitanCore-7960
DIY Dual Channel Driver de Motores basado en BTS7960
36 parts3 - 2 layers140.3 × 89.3 mm
- 4 layers83.6 × 84.8 mm
Skateboard
86kkd/millionBoard
Amazing 500million sensor enetric skateboard use body center of gravity to control !!!
186 parts - 4 layers120 × 46 mm
TATAMI STM32-V2
AgustinPrietoValdez/competition-robots
Custom competition robots — maze/micromouse (MISA), sumo (TATAMI 1) & mini-sumo (RUCHO). KiCad PCBs, STM32/Arduino firmware, Fusion 360. National champion & international prizes — by EDNAROBOTICS.
115 partsMIT - 2 layers125 × 95 mm
Vanchor helm
AlexAsplund/vanchor-pcb
95×92 mm 2-layer board. Full H-bridge for a 12–24 V brushed trolling motor, controlled by the vanchor-helm board over one straight 8-wire cable. Two build variants share the same PCB:
69 parts - 4 layers80 × 120 mm
