
Proprietary RJ45
jonathanforhan/Proprietary_RJ45
SNHU Capstone-II RJ45 breakout board for conversion to proprietary pinout supplying 12VDC on unused pins for 10/100Mbps

SNHU Capstone-II JST-GH / RJ45 breakout board
JST GH RJ45 is an open-source printed circuit board by jonathanforhan, from the jonathanforhan/JST-GH_RJ45 repository on GitHub. It is a 2-layer board of 28 × 48 mm with 12 parts on 11 nets, routed with 40 tracks and 6 vias.
It is built around the SS14, LTST-C170KGKT and PJ-002A, with the SM08B-GHS-TB and SS-60000-009 among its other parts. Its parts include 3 diodes, 3 connectors, 2 resistors and 1 capacitor.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3 |
| 2 | SS14 | Diode_SMD:D_SMA_Handsoldering | D1, D2 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 100u | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1 |
| 1 | LTST-C170KGKT | footprints:LED_LTST-C170KGKT_LTO | LED1 |
| 1 | PJ-002A | footprints:CUI_PJ-002A | J2 |
| 1 | SM08B-GHS-TB | footprints:CONN_SM08B-GHS-TB_JST | J3 |
| 1 | SS-60000-009 | footprints:CONN8_SS-60000_STW | J1 |

jonathanforhan/Proprietary_RJ45
SNHU Capstone-II RJ45 breakout board for conversion to proprietary pinout supplying 12VDC on unused pins for 10/100Mbps

Gujilde163904STI/lifi-project
Cross-platform development workspace for a LI-FI (Light Fidelity) embedded communication system using Raspberry Pi 3, Raspberry Pi 4, and ESP8266.

sabas0ba/kicad_skills
Container-based toolkit for circuit design: datasheets, SPICE simulation and KiCad review

Takingo/Mypcb35
OmniCircuit AI is a local proof of concept for an autonomous PCB/PCBA design and manufacturing suite. The current implementation focuses on the ESP32-S3 + DWM3000 UWB Anchor example and establishes the architecture for:


ThunderFly-aerospace/TFUNIPAYLOAD01
Universal interface for TF-ATMON sensor payload.

kanha2907/Gps-using-neom9n-
Compact GPS breakout board based on the u-blox NEO-M9N module. Includes support circuitry for battery-backed operation, LEDs, and passives—designed for low-power embedded GPS applications.

It measures 28 × 48 mm and has 2 copper layers, 1.6 mm thick.
12 parts, built around the SS14, LTST-C170KGKT, PJ-002A and SM08B-GHS-TB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jonathanforhan/JST-GH_RJ45 repository on GitHub, at the commit this page was made from: the board is JST-GH_RJ45/JST-GH_RJ45.kicad_pcb and its schematic JST-GH_RJ45/JST-GH_RJ45.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jonathanforhan before reusing the design.