2 layers148.7 × 142.4 mm
2 layers
Flashingbootldr
JonathanFerron/BlueJaySplit Ergo Keyboard
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 52
- Pads
- 62
- Tracks, vias
- 31, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 5 Jun 2022
- Updated
- 16 Jun 2023
Overview
Flashingbootldr is an open-source printed circuit board by JonathanFerron, from the JonathanFerron/BlueJay repository on GitHub. It is a 2-layer board with 3 parts on 52 nets, routed with 31 tracks and 0 vias.
It is built around the ATMEGA328P-PU and ARDUINO UNO R3. Its parts include 1 capacitor and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdBlueJay
Split Ergonomic Keyboard
This is a project for a new split ergonomic QMK-powered keyboard. The goal is for it to be minimalist, meant for users who strictly touch-type, and made with easy to solder through-hole components. It is significantly inspired on the Torn split keyboard, with modifications such as adding a partial "numrow" and moving the thumb cluster further out.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | ATmega328P-P | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | C_Polarized_Small | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
Questions
What parts does the Flashingbootldr use?
3 parts, built around the ATMEGA328P-PU and ARDUINO UNO R3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flashingbootldr KiCad files?
From the JonathanFerron/BlueJay repository on GitHub, at the commit this page was made from: the board is build/flashingbootldr/flashingbootldr/flashingbootldr.kicad_pcb and its schematic build/flashingbootldr/flashingbootldr/flashingbootldr.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flashingbootldr design in my own project?
Its repository states no licence, so its author keeps all rights: ask JonathanFerron before reusing the design.
More from JonathanFerron/BlueJay
2- 2 layers148.7 × 142.4 mm
Similar boards
- 2 layers142.2 × 125.7 mm
- 2 layers68.8 × 53.6 mm
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0 - 2 layers69.1 × 53.8 mm
Motor controller
AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum
25 parts79MIT - 2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 2 layers53.8 × 69.6 mm
EVSE V2 2
PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno
32 parts50 - 2 layers113.7 × 61 mm
ArduTester SMD
jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4
17 parts14 - 4 layers65.9 × 52.9 mm
- 4 layers68.6 × 53.3 mm
101 PCB
ICRS/101
The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.
89 parts10CC-BY-4.0