

- Size
- 243.8 × 269.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 44
- Pads
- 196
- Tracks, vias
- 399, 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Feb 2017
- Updated
- 13 Sep 2023
Overview
PSU is an open-source printed circuit board by jonathan-tooley, from the jonathan-tooley/903 repository on GitHub. It is a 2-layer board of 243.8 × 269.2 mm with 67 parts on 44 nets, routed with 399 tracks and 4 vias.
It is built around the TIP2955 and 1N4001-TD. Its parts include 10 capacitors, 10 resistors, 8 fuses, 5 diodes and 5 transistors. It belongs with the power boards of this library.
Main components
2Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | ~ | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2, H3, H6, H8, H10, H11 |
| 4 | 100mR 5W | Resistor_THT:R_Axial_Power_L25.0mm_W6.4mm_P27.94mm | R2, R3, R4, R5 |
| 4 | 1A | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type171_RT13702HBWC_1x02_P7.50mm_Horizontal | F4, F6, F7, F8 |
| 4 | Heatsink_TO247 | ELLIOTT:Heatsink_TO247 | HS4, HS5, HS6, HS7 |
| 4 | TIP2955 | Package_TO_SOT_THT:TO-218-3_Vertical | Q1, Q2, Q3, Q4 |
| 3 | 100R 0.5W | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R6, R7, R8 |
| 3 | 10u | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C7, C8, C9 |
| 3 | 1N4001T | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D4, D5, D6 |
| 3 | 47000u | Capacitor_THT:CP_Radial_D35.0mm_P10.00mm_SnapIn | C1, C2, C3 |
| 3 | 470u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C4, C5, C6 |
| 3 | Fuse | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type171_RT13702HBWC_1x02_P7.50mm_Horizontal | F1, F2, F3 |
| 3 | Heatsink | ELLIOTT:Heatsink | HS1, HS2, HS3 |
| 3 | ~ | ELLIOTT:Relay55.13 | K1, K2, K3 |
| 2 | D_Bridge_+-AA | ELLIOTT:Diode_Bridge_Vishay_GBU | D1, D3 |
| 2 | Heatsink 712-4241 | ELLIOTT:Heatsink 712-4241 | HS15, HS16 |
| 2 | ~ | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type171_RT13706HBWC_1x06_P7.50mm_Horizontal | J3, J4 |
| 1 | 1000u | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C10 |
| 1 | 10k | ELLIOTT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9 |
| 1 | 24v | ELLIOTT:FL3024Transformer | TR2 |
| 1 | 390R | ELLIOTT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 47 | ELLIOTT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R10 |
| 1 | 6v | ELLIOTT:FL526Transformer | TR1 |
| 1 | 8A | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type171_RT13702HBWC_1x02_P7.50mm_Horizontal | F5 |
| 1 | BC107 | ELLIOTT:TO-92L_Inline | Q5 |
| 1 | LM7806_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | LM7824_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | LM7906_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | ~ | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type171_RT13705HBWC_1x05_P7.50mm_Horizontal | J1 |
| 1 | ~ | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type171_RT13704HBWC_1x04_P7.50mm_Horizontal | J5 |
| 1 | ~ | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type171_RT13703HBWC_1x03_P7.50mm_Horizontal | J2 |
More from jonathan-tooley/903
12- 2 layers233.4 × 160 mm

- 2 layers330 × 150 mm

- 2 layers330 × 150 mm

- 2 layers330 × 150 mm

- 2 layers233.4 × 160 mm

- 2 layers311.2 × 146.1 mm

- 2 layers259.1 × 213.4 mm

- 2 layers251 × 126 mm

- 2 layers281 × 114 mm

- 4 layers419.1 × 264.9 mm

- 2 layers477.5 × 127.3 mm

- 2 layers431.8 × 114.3 mm

Similar boards
- 2 layers146.8 × 93.9 mm

Power supply
Ekstazaa/Symmetric-Linear-Power-Supply-30V
Repositiry contains description of Linear power supply project. It is based on Trafo with own pcb board with rectifier, filtres and regulator LM3178 and LM337.
47 parts1MIT - 2 layers100 × 100 mm

Temp pro
CrafterSteve/ESP32_Temp_Con
An temperture control device, based on ESP32. With custom PCB board, it can fit an ESP32-DevKit as controller, DAC and ADC is done on board, as well as, a 5 to +-12v power supply..
134 parts - 2 layers87.2 × 72.9 mm

Circuito impresso
crmoratelli/ShieldCLP
The following project refers to one of the steps in the development of an Open Source PLC with a web interface using Raspberry Pi.
14 parts - 2 layers261.1 × 147.5 mm

- 2 layers

- 2 layers138.1 × 114.3 mm

- 2 layers133.1 × 53.8 mm

- 2 layers160 × 100.1 mm

Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
67 parts282
Questions
How big is the PSU PCB?
It measures 243.8 × 269.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PSU use?
67 parts, built around the TIP2955 and 1N4001-TD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PSU KiCad files?
From the jonathan-tooley/903 repository on GitHub, at the commit this page was made from: the board is KiCad/Real903/PSU/PSU.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PSU design in my own project?
Its repository states no licence, so its author keeps all rights: ask jonathan-tooley before reusing the design.