

New dac
- Size
- 100 × 80 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 158
- Nets
- 121
- Pads
- 462
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 Mar 2023
- Updated
- 18 Jul 2023
Overview
New dac is an open-source printed circuit board by jonaheinke, from the jonaheinke/dac repository on GitHub, published under the MIT licence. It is a 4-layer board of 100 × 80 mm with 158 parts on 121 nets.
It is built around the BD9G101G-TR, PCM2706CPJTR and PCM5102APW, with the BCM56DS and BCM53DS among its other parts. Its parts include 60 resistors, 43 capacitors, 13 transistors, 9 diodes and 6 ICs. It belongs with the audio and music boards of this library.
Main components
5BD9G101G-TR
SOT-23-6-40℃~+105℃@(TA) 1 1.5MHz 1V~29.4V 500mA 6V~42V Adjustable Buck Buck Built-in No SOT-23-6 DC-DC Converters ROHSROHM SemiconductorDC-DC ConvertersPCM2706CPJTR
TQFP-32(7x7)-25℃~+85℃ 150uA 16 2 32000Hz、44100Hz、48000Hz 3V~5.25V Audio Decoder Digital filtering SPI TQFP-32(7x7) ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special PurposePCM5102APW
TSSOP-20-25℃~+85℃ 1.8V~3.3V 2 32 384kHz 500uA 50MHz Audio Decoder Digital filtering、Power-down mode I2S TSSOP-20 ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special PurposeBCM56DS
-Bipolar (BJT)NexperiaBCM53DS
TSOP-6-55℃~+150℃ 100nA 140MHz 1A 2 PNP 500mV 500mW 5V 80V PNP TSOP-6 Bipolar (BJT) ROHSNexperiaBipolar (BJT)
README
README.mdDAC with Headphone Amplifier
Introduction
Schematic preview
Main schematic
Left amplifier (right channel is identical)
Power supply
Front plate
Parts
158| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C5, C6, C8, C12, C13, C16, C19, C22, C23, C24, C28, C29, C35 |
| 13 | 22k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13, R16, R19, R22, R33, R34, R37, R38, R43, R45, R55, R56, R61 |
| 11 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C7, C9, C10, C14, C15, C18, C21, C32, C37, C38 |
| 6 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R14, R15, R20, R53, R54, R62 |
| 5 | 15 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R17, R18, R26, R51, R52 |
| 5 | 15n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4, C25, C30, C31 |
| 5 | 1k5 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R7, R30, R39, R41 |
| 5 | BCM56DS | Package_SO:SC-74-6_1.5x2.9mm_P0.95mm | Q1, Q5, Q6, Q7, Q12 |
| 4 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R21, R44, R46, R63 |
| 4 | 2SC4511 | Package_TO_SOT_THT:TO-220F-3_Vertical | Q8, Q9, Q10, Q11 |
| 4 | 2k2 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R23, R47, R48, R65 |
| 4 | 2u2 | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C17, C20, C26, C46 |
| 4 | 4k3 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R35, R36, R40, R42 |
| 4 | 8R2 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R28, R29, R49, R50 |
| 4 | BCM53DS | Package_SO:SC-74-6_1.5x2.9mm_P0.95mm | Q2, Q3, Q4, Q13 |
| 4 | Heatsink | library:Heatsink_Boyd_507302B00000G | HS1, HS2, HS3, HS4 |
| 3 | 1M | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8, R9, R32 |
| 3 | 680 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12, R24, R31 |
| 2 | +3V3 | TestPoint:TestPoint_Pad_2.0x2.0mm | TP6, TP11 |
| 2 | 10u | Capacitor_THT:CP_Radial_D13.0mm_P5.00mm | C41, C42 |
| 2 | 22 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R5 |
| 2 | 430k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6, R10 |
| 2 | 470u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C39, C40 |
| 2 | 47k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R58, R59 |
| 2 | 5k1 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | D | Package_TO_SOT_SMD:SOT-23-3 | D4, D5 |
| 2 | DUAL_TVS_15V | Package_TO_SOT_SMD:SOT-23 | D2, D7 |
| 2 | QUAD_TVS_5V | Package_TO_SOT_SMD:SOT-665 | D1, D9 |
| 2 | ~ | Package_TO_SOT_SMD:SOT-23-3 | D10, D11 |
| 1 | +22 | TestPoint:TestPoint_Pad_2.0x2.0mm | TP4 |
| 1 | +24 | TestPoint:TestPoint_Pad_2.0x2.0mm | TP2 |
| 1 | +5V | TestPoint:TestPoint_Pad_2.0x2.0mm | TP3 |
| 1 | -3V3 | TestPoint:TestPoint_Pad_2.0x2.0mm | TP7 |
| 1 | 10k | library:RK09L12B | RV1 |
| 1 | 10u | Capacitor_THT:C_Rect_L7.2mm_W7.2mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C36 |
| 1 | 12MHz±0.05% | library:Resonator_Murata | Y1 |
| 1 | 1V8 | TestPoint:TestPoint_Pad_2.0x2.0mm | TP8 |
| 1 | 1n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C27 |
| 1 | 3k9 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 1 | 470u | Capacitor_THT:CP_Radial_D13.0mm_P5.00mm | C11 |
| 1 | 4u7 | Capacitor_THT:C_Rect_L7.2mm_W7.2mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C34 |
| 1 | 4u7 | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C33 |
| 1 | 500mA | Fuse:Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1 |
| 1 | 6u8 | Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder | L1 |
| 1 | AudioJack3_Switch | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Horizontal | J6 |
| 1 | AudioJack3_Switch | library:Audio_Jack_SJ-6307 | J5 |
| 1 | BD9G101G | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U1 |
| 1 | Barrel_Jack_Switch | library:Audio_Jack_SJ-6307 | J2 |
| 1 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Horizontal | J3 |
| 1 | D | Diode_SMD:D_SOD-323_HandSoldering | D6 |
| 1 | DPDT_Relay | Relay_THT:Relay_DPDT_FRT5 | K2 |
| 1 | GND | TestPoint:TestPoint_Pad_2.0x2.0mm | TP5 |
| 1 | Ground_Jumper | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | LM555xN | Package_DIP:DIP-8_W7.62mm | U6 |
| 1 | LT3088 | Package_TO_SOT_SMD:TO-263-3_TabPin2 | U2 |
| 1 | PCM2706CPJTR | Package_QFP:TQFP-32_7x7mm_P0.8mm | U3 |
| 1 | PCM5102A | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U5 |
| 1 | TLV1117LV-33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J4 |
| 1 | VAS_L | TestPoint:TestPoint_Pad_2.0x2.0mm | TP9 |
| 1 | VAS_R | TestPoint:TestPoint_Pad_2.0x2.0mm | TP10 |
| 1 | VBUS | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1 |
More from jonaheinke/dac
3- 4 layers88 × 99 mm

- 2 layers76.5 × 99 mm

- 2 layers103 × 30.5 mm

Similar boards
- 4 layers175 × 135 mm

- 2 layers37.4 × 56.1 mm

UsbAudio
28add11/USB-charger-and-audio-PCB
A PCB with decently fast USB charging and audio playback support
40 partsMIT - 2 layers60.5 × 24 mm

USB Audio Sound Card
uttkarsh-chimane/USB-Audio-Sound-Card
USB Audio Sound Card based on the PCM2706C codec, designed in KiCad.
27 partsMIT - 2 layers51.4 × 45.7 mm

- 4 layers98 × 48 mm

Esphome pressure
gcormier/esphome-pressure
esphome board with a differential pressure sensor, supporting a variety of power sources
51 parts102 - 2 layers81 × 59 mm

Alarmbuddy
gcormier/alarmbuddy
The output current for sensors is limited to a few milliamps.
34 parts22 - 4 layers56.6 × 57.7 mm

Espairqual
gcormier/espairqual
esphome board to interface with a few air quality (PM) sensors
47 parts6 - 2 layers78 × 79 mm

Questions
How big is the New dac PCB?
It measures 100 × 80 mm and has 4 copper layers, 1.6 mm thick.
What parts does the New dac use?
158 parts, built around the BD9G101G-TR, PCM2706CPJTR, PCM5102APW and BCM56DS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the New dac KiCad files?
From the jonaheinke/dac repository on GitHub, at the commit this page was made from: the board is kicad/new_dac/new_dac.kicad_pcb and its schematic kicad/dac/amplifier_left.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the New dac design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).