jonafanho/KiCad-ComponentsUseful schematics and footprints for KiCad.
Example is an open-source printed circuit board by jonafanho, from the jonafanho/KiCad-Components repository on GitHub, published under the MIT licence. It is a 2-layer board of 40 × 30 mm with 39 parts on 69 nets, routed with 415 tracks and 60 vias.
It is built around the ESP32-S3-WROOM-1-N8, MT3608 and AP2112K-3.3, with the SS34 among its other parts. Its parts include 16 capacitors, 12 resistors, 4 connectors, 3 ICs and 3 diodes. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C3, C9, C12, C16 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2, C7, C15 |
| 3 | 1M | Resistor_SMD:R_0603_1608Metric | R1, R6, R8 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C4, C6, C10 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R7, R12 |
| 2 | 1N4148 | Diode_SMD:D_SOD-123 | D1, D2 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C1, C5 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C13, C14 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C8, C11 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 10uH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 200k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 50R | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U2 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | SS34 | Diode_SMD:D_SMA | D3 |
| 1 | SSD1309 24-Pin Connector | Display_FPC:24-pin | J2 |
| 1 | SSD1322 30-Pin Connector | Display_FPC:30-pin | J4 |
| 1 | SSD1327 16-Pin Connector | Display_FPC:16-pin | J3 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J1 |
It measures 40 × 30 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the ESP32-S3-WROOM-1-N8, MT3608, AP2112K-3.3 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jonafanho/KiCad-Components repository on GitHub, at the commit this page was made from: the board is example.kicad_pcb and its schematic example.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Matyas604/Security-Alarm-Panel
Home Assistant Smart Home Alarm Control Panel with fingerprint reader, NFC/RFID card reader, motion radar, and touchscreen TFT display. It can control your smart home, not just your home security system.
ANSHUMANDOCX/ESP32-Touch-Hub
This is a Esp32 Hub that has a 3.5 inch tft touch screen
nthclrd/picflash
Programmeur PIC open source en Rust : remplace MPLAB IPE/XC8 pour les PIC16, pilote les PICkit 4/5/Basic ou une carte RP2040 maison (KiCad)
jonny190/TableLight
A 3D-printable, battery-powered, USB-C rechargeable table lamp in the classic "Poldina" shape - honeycomb disc base, thin stem, down-firing cone shade with a white top - running WLED on an ESP32, with a capacitive touch…
kaushalch1/air-monitor
this is a portable air quality monitoring device designed to measure particulate matter and environmental conditions in real time.
t3ry4git/stm32Co2
A simple CO2 and environmental monitor based on the STM32F103C8 microcontroller. The firmware reads temperature and humidity from a DHT22 sensor, measures CO2 concentration using an MHZ19B module and displays values on…