2 layers70.2 × 57 mm
SAR ADC
iic-jku/gf180mcu-jku-projects
This wafer.space tapeout includes various projects from the IICQC at JKU and a TinyWhisper RISC-V from JMU.
25 parts11
4 layers85.6 × 54 mm
SonoLoad
Joe-Purvis/SonoLoadArduino Nano 33 IoT Breakout board
- Size
- 85.6 × 54 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 46
- Pads
- 179
- Tracks, vias
- 246, 35
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 29 Oct 2026
- Updated
- 6 Nov 2026
Overview
SonoLoad is an open-source printed circuit board by Joe-Purvis, from the Joe-Purvis/SonoLoad repository on GitHub. It is a 4-layer board of 85.6 × 54 mm with 44 parts on 46 nets, routed with 246 tracks and 35 vias.
It is built around the 74LVC1G74DP,125, TLV3501AID and BAS70-04. Its parts include 8 connectors, 7 capacitors, 7 resistors, 3 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
74LVC1G74DP,125
TSSOP-8-40℃~+125℃ 1 1 1.1ns 1.65V~5.5V 1ns 200MHz 32mA 32mA 4.1ns@5V,50pF 40uA 4pF 74LVC Series Asynchronous Complementary D-Type Rising Edge Set and Reset TSSOP-8 Flip Flops ROHSNexperiaFlip Flops
TLV3501AID
SOIC-8-2.75V~-1.35V、1.35V~2.75V -40℃~+125℃ 1 1mV 2.7V~5.5V 2pA 2pA 3.2mA 4.5ns 5.5V 55dB 6mV Enable/shutdown function、Overvoltage protection Push-pull Rail-to-Rail Input, Rail-to-Rail Output TTL、CMOS SOP-8 Comparators ROHSTexas InstrumentsComparators
BAS70-04
SOT-23Schottky Diodeshongjiacheng
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4, H5, H6 |
| 3 | 0.1µF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C4, C5 |
| 3 | 10 kΩ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R8, R9 |
| 3 | 10µF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C2, C3, C6 |
| 3 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | P_PCD1, P1_LOAD1, P2_LOAD1 |
| 3 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3 |
| 3 | TestPoint | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP1, TP2, TP3 |
| 2 | Conn_01x15 | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | P3, P6 |
| 1 | Common_Components:SonoLoad_GitHub_QR | ||
| 1 | 100 kΩ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 100kΩ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 100pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7 |
| 1 | 10K | Potentiometer_THT:Potentiometer_Bourns_3266P_Horizontal | RV1 |
| 1 | 2.2 kΩ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 22 kΩ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 74LVC1G74DP,125 | Package_SO:TSSOP-8_3x3mm_P0.65mm | U1 |
| 1 | Arduino_Nano_33_IoT_AllFunctions | Common_Components:Socket_Nano33IoT_ArduinoNumbering | U2 |
| 1 | BAS70-04 | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | BAT43W-V | Diode_SMD:D_SOD-123 | D2 |
| 1 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | P2 |
| 1 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1_PCD1 |
| 1 | Conn_01x07 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J2 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | P1 |
| 1 | Conn_01x08 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J5 |
| 1 | Conn_01x10 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J3 |
| 1 | TLV3501AID | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
Questions
How big is the SonoLoad PCB?
It measures 85.6 × 54 mm and has 4 copper layers, 1.6 mm thick.
What parts does the SonoLoad use?
44 parts, built around the 74LVC1G74DP,125, TLV3501AID and BAS70-04. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SonoLoad KiCad files?
From the Joe-Purvis/SonoLoad repository on GitHub, at the commit this page was made from: the board is SonoLoad.kicad_pcb and its schematic ArduinoNano33_IOT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SonoLoad design in my own project?
Its repository states no licence, so its author keeps all rights: ask Joe-Purvis before reusing the design.
Similar boards
- 4 layers130 × 90 mm
FrequnecyCounter
LUMERIIX/FrequencyCounter
FPGA based frequnecy counter hard- and software repository
129 parts6 - 6 layers83.5 × 99.4 mm
- 4 layers115 × 65 mm
- 4 layers160 × 100 mm
Hex Oscilloscope
HexFud/stm32-fpga-oscilloscope
A 1-Channel 20MHz 100MS/s Mixed-Signal Digital Storage Oscilloscope on a custom 4-layer PCB. Powered by STM32H7, Lattice iCE40 FPGA, and USB-C
120 parts1 - 4 layers130 × 100 mm
- 4 layers80 × 80 mm
DufocklianPower
asadpetwalker/benchpowersupply
A 500W Variable PSU with real time CC/CV error correction, current clamping, a 16 bit DAC for millivolt and milliamp precision.
85 partsMIT - 4 layers113 × 70.1 mm
