

PCB_DESIGN
- Size
- 297 × 210 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 132
- Nets
- 152
- Pads
- 423
- Tracks, vias
- 677, 13
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 9 Sep 2024
- Updated
- 23 Oct 2024
Overview
PCB 5 is an open-source printed circuit board by joe-manuel021, from the joe-manuel021/ELECTRONICS-BOARD repository on GitHub. It is a 2-layer board of 297 × 210 mm with 132 parts on 152 nets, routed with 677 tracks and 13 vias.
It is built around the DHT11 and BC547. Its parts include 46 connectors, 30 switches, 18 resistors, 15 diodes and 5 transistors.
Main components
2Parts
132| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1, SW2, SW3, SW4, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21 +5 |
| 18 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6, J7, J10, J12, J13, J14, J15, J16, J26, J28, J31 +2 |
| 11 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D9, D11, D13, D15 |
| 10 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J20, J21, J22, J23, J24, J30, J38, J39, J45, J46 |
| 7 | 100Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R8, R10 |
| 6 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J17, J19, J25, J29, J40, J41 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_4.0x4.0mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 5 | 1kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R12, R14, R16, R18 |
| 5 | SW_Push | MODULAR:LATCH_BUTTON | SW22, SW23, SW24, SW25, SW26 |
| 4 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D8, D10, D12, D14 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R13, R15, R17 |
| 4 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q2, Q3, Q4, Q5 |
| 4 | Conn_01x03_Male | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J33, J35, J36, J37 |
| 4 | DIPxx-1Cxx-51x | Relay_THT:Relay_SPDT_Finder_36.11 | K1, K2, K3, K4 |
| 3 | Conn_01x08_Male | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J11, J27, J44 |
| 3 | R_Potentiometer | Potentiometer_THT:Potentiometer_Piher_T-16L_Single_Vertical_Hole | RV1, RV2, RV3 |
| 2 | Buzzer | Buzzer_Beeper:MagneticBuzzer_ProSignal_ABI-010-RC | BZ1, BZ2 |
| 2 | Conn_01x16_Female | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J42, J43 |
| 1 | .1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C3 |
| 1 | 2N2219 | Package_TO_SOT_THT:TO-39-3 | Q1 |
| 1 | 5.1kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | Conn_01x04_Female | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J18 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J34 |
| 1 | Conn_01x07_Female | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J32 |
| 1 | DHT11 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | U1 |
| 1 | LDR03 | OptoDevice:R_LDR_10x8.5mm_P7.6mm_Vertical | R9 |
| 1 | LM35-D | Package_TO_SOT_THT:TO-92_Inline | U2 |
| 1 | breadboard_small | MODULAR:breadboard_small |
The 130 most common of 132 parts.
More from joe-manuel021/ELECTRONICS-BOARD
8- 2 layers297 × 210 mm

- 2 layers297 × 210 mm

- 2 layers297 × 210 mm

- 2 layers322.4 × 210 mm

- 2 layers297 × 210 mm

- 2 layers297 × 210 mm

- 2 layers297 × 210 mm

- 2 layers100 × 100 mm

Similar boards
- 2 layers

Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers154.2 × 103.9 mm

Green House Controller RPi Shield
janithcbk123/Automated-Greenhouse
Greenhouse Automation Project
85 parts1MIT - 2 layers98.1 × 101.3 mm

Climatecontrolpcb
Sharan21-cmd/climate-control-pcb-design
A compact and efficient Climate Control PCB designed for monitoring and regulating temperature and humidity using embedded electronics.
16 parts1 - 2 layers130 × 80 mm

- 2 layers109.9 × 105.6 mm

ClimateController
Pablo-Ortiz-Lopez/ClimateController
ESP8266 based device which handles the climate of a room.
23 parts - 2 layers49 × 43 mm

- 2 layers71.5 × 72 mm

- 2 layers

Main automatic manifold
Febriyandi12/Desain_PCB
Kolaborasi untuk update desain pcb yang telah di research
59 parts1
Questions
How big is the PCB 5 PCB?
It measures 297 × 210 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB 5 use?
132 parts, built around the DHT11 and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB 5 KiCad files?
From the joe-manuel021/ELECTRONICS-BOARD repository on GitHub, at the commit this page was made from: the board is PCB_PROJECT/PCB_5/PCB_5.kicad_pcb and its schematic BOARD 1/741.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB 5 design in my own project?
Its repository states no licence, so its author keeps all rights: ask joe-manuel021 before reusing the design.