

FeedbackSchematic
Feedback decoder for BiDi with ZCan interface to Z21 based on Esp32
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 102
- Nets
- 100
- Pads
- 328
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 6 (file 20211014)
- Created
- 14 Sep 2022
- Updated
- 17 Aug 2026
Overview
FeedbackSchematic is an open-source printed circuit board by joao404, from the joao404/ZCanFeedbackBiDi repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board with 102 parts on 100 nets.
It is built around the 74HC595, L7805 and RJ45. Its parts include 46 resistors, 33 diodes, 11 connectors, 8 ICs and 4 capacitors. It belongs with the interfaces and adapters boards and the STM32 boards of this library.
Main components
374HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift RegistersL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsRJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
README
README.mdZCanFeedbackBiDi
This project is based on the work of:
- Philipp Gathow (https://pgahtow.de/w/R%C3%BCckmeldung 8xRailCom-Detektor)
- Zimo Can Protocol
Several projects are include:
- Roco/Zimo CAN protocol to Z21 ethernet interface converter on ESP32
- Roco 10808 compatible Bidi/Railcom detector on ESP32 (currently suspended)
- Roco 10808 compatible Bidi/Railcom detector on STM32 using STM32Cube (currently suspended)
- Roco 10808 compatible Bidi/Railcom detector on STM32 using Arduino framework (ongoing. Planned to be finished on winter 2023)
- Roco 10808 compatible Bidi/Railcom detector on STM32 using Arduino framework and FreeRtos (ongoing. Planned to be finished on winter 2023)
Parts
102| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 1N5822 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D1, D2, D11, D12, D21, D22, D31, D32, D41, D42, D51, D52, D61, D62, D71, D72 |
| 16 | 470 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R110, R111, R112, R113, R114, R115, R116, R117, R120, R121, R122, R123, R124, R125, R126, R127 |
| 16 | LED | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm | D110, D111, D112, D113, D114, D115, D116, D117, D120, D121, D122, D123, D124, D125, D126, D127 |
| 9 | 22k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R11, R21, R31, R41, R51, R61, R71, R100 |
| 8 | 4.7k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R12, R22, R32, R42, R52, R62, R72 |
| 7 | 22 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R13, R23, R33, R43, R53, R63, R73 |
| 3 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C3, C4 |
| 3 | Conn_01x08_Male | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3, J4, J5 |
| 2 | 2k2 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R102, R103 |
| 2 | 330 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R101, R104 |
| 2 | 6N137 | Package_DIP:DIP-8_W7.62mm | U4, U5 |
| 2 | 74HC595 | Package_DIP:DIP-14_W7.62mm_Socket | U7, U8 |
| 2 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10, J11 |
| 2 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U2, U3 |
| 2 | RJ45 | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | J6, J7 |
| 1 | 120 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R105 |
| 1 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D100 |
| 1 | 22 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3 |
| 1 | 47u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | BluePill_STM32F103C | Footprint_Marcel:Bluepill | U1 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_RND:TerminalBlock_RND_205-00002_1x03_P5.00mm_Horizontal | J1 |
| 1 | Screw_Terminal_01x08 | TerminalBlock_RND:TerminalBlock_RND_205-00018_1x08_P5.00mm_Horizontal | J2 |
| 1 | TJA1050_Board | Footprint_Marcel:TJA1050 | U6 |
Similar boards
- 2 layers400 × 140 mm

- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers100 × 50 mm

- 2 layers44.9 × 95.6 mm

Bluetoothkiste
julianschick/bluetoothkiste
Bluetooth-Box für Segelflugzeuge zur Kommunikation mit LX und FLARM
62 parts5MIT - 2 layers

ATMEGA 32 1
ernest-czachorowski/Flood-Sensors-KiCad-Files
This repository contains KiCad files for my master's thesis IoT infrastructure, which includes water leak detection sensors.
74 partsMIT - 2 layers111 × 91.4 mm

- 2 layers83 × 123.5 mm

Caeluspcb
n1vaan/caelusencoderpcb
This is a custom PCB we designed to streamline the control system for our liquid-fueled rocket tests. It combines signal encoding, ignition control, and ESP32-based automation into one board, letting us send multiple…
62 parts
Questions
What parts does the FeedbackSchematic use?
102 parts, built around the 74HC595, L7805 and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FeedbackSchematic KiCad files?
From the joao404/ZCanFeedbackBiDi repository on GitHub, at the commit this page was made from: the board is FeedbackSchematic/FeedbackSchematic.kicad_pcb and its schematic FeedbackSchematic/FeedbackSchematic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FeedbackSchematic design in my own project?
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).