2 layers27.9 × 22.9 mm
2 layers27.9 × 22.9 mm
Pipe v1
jnthas/pipeCircuit of the project called "Pirilampo Perpétuo"
- Size
- 27.9 × 22.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 7
- Pads
- 18
- Tracks, vias
- 23, 6
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 31 Dec 2020
- Updated
- 15 Nov 2024
Overview
Pipe v1 is an open-source printed circuit board by jnthas, from the jnthas/pipe repository on GitHub. It is a 2-layer board of 27.9 × 22.9 mm with 8 parts on 7 nets, routed with 23 tracks and 6 vias.
It is built around the BC548 and BC558. Its parts include 4 resistors, 2 transistors, 1 capacitor and 1 diode.
Main components
2README
README.mdpipe
Circuit of the project called "Pirilampo Perpétuo"
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R3 |
| 1 | 2.2uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 2M2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
| 1 | 47 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R4 |
| 1 | BC548 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | BC558 | Package_TO_SOT_THT:TO-92_Inline | Q2 |
| 1 | LDR03 | OptoDevice:R_LDR_7x6mm_P5.1mm_Vertical | R2 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
More from jnthas/pipe
1Similar boards
- 4 layers99.6 × 99.8 mm
- 2 layers239.6 × 239.9 mm
- 2 layers98 × 135 mm
- 2 layers242.5 × 102.5 mm
- 2 layers100 × 100 mm
- 2 layers100 × 70 mm
- 4 layers88.3 × 54.6 mm
1005-Flash Programmer
wilsondr9999/1005-Flash-Programmer
Flash Programmer for SST39 Flash ROMs
36 parts2AGPL-3.0 - 2 layers148 × 175 mm
Questions
How big is the Pipe v1 PCB?
It measures 27.9 × 22.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pipe v1 use?
8 parts, built around the BC548 and BC558. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pipe v1 KiCad files?
From the jnthas/pipe repository on GitHub, at the commit this page was made from: the board is pipe_v1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pipe v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jnthas before reusing the design.