2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT
2 layers25.4 × 24.1 mm
Isp header breakout
jmpinit/isp-header-breakoutA simple AVR ISP header breakout PCB.
- Size
- 25.4 × 24.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 6
- Pads
- 12
- Tracks, vias
- 22, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 1 Jan 2017
- Updated
- 1 Jan 2017
Overview
Isp header breakout is an open-source printed circuit board by jmpinit, from the jmpinit/isp-header-breakout repository on GitHub, published under the MIT licence. It is a 2-layer board of 25.4 × 24.1 mm with 7 parts on 6 nets, routed with 22 tracks and 0 vias.
It belongs with the interfaces and adapters boards of this library.
README
README.mdISP Header Breakout
A little PCB to make it easier/cleaner to attach an in-system programmer to a system.
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | CONN_01X01 | Pin_Headers:Pin_Header_Straight_1x01 | GND1, MISO1, MOSI1, RESET1, SCK1, VCC1 |
| 1 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03 | P1 |
Questions
How big is the Isp header breakout PCB?
It measures 25.4 × 24.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Isp header breakout use?
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Isp header breakout KiCad files?
From the jmpinit/isp-header-breakout repository on GitHub, at the commit this page was made from: the board is isp-header-breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Isp header breakout design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers40 × 20 mm
- 2 layers19.8 × 30 mm
- 2 layers35.6 × 58.2 mm
Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm
- 2 layers26 × 44 mm
Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm
Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0 - 2 layers
