jlcjak/frameoscope87oscilloscope expansion card / module for framework laptops
Framework oscilloscope is an open-source printed circuit board by jlcjak, from the jlcjak/frameoscope repository on GitHub. It is a 4-layer board of 26 × 44 mm with 87 parts on 74 nets, routed with 569 tracks and 296 vias.
It is built around the ICE40UP5K-SG48I, FT232HL-REEL and TPS62A02DRL, with the LM4040C20IDBZT, ASDM1-12.000MHZ-LC-T and ECS-TXO-2520MV-400-AN-TR among its other parts. Its parts include 47 capacitors, 19 resistors, 8 ICs, 2 connectors and 2 crystals. It belongs with the sensors and measurement boards and the FPGA and CPLD boards of this library.
oscilloscope expansion card / module for framework laptops
I have built and tested frameoscope, it works! I made it compatible with ngscopeclient. Here is how to use it:
curl -fsSL frame.fasterscope.com/install.sh | bash (Source code in "/software")That's it, now ngscopeclient should see frameoscope as an oscilloscope
to uninstall: curl -fsSL frame.fasterscope.com/uninstall.sh | bash
this works on ubuntu 24, for other distros clone this repo and ask codex(/your agent of choice) to make it work
The script installs, starts and enables a service that will flash frameoscope upon insertion and start a bridge that translates the stream into ngscopeclient compatible packets
Nextpcb sponsored the first iteration of this project, thanks nextpcb. you can easily use them to make this for very cheap. They are professional, fast and cheap. nextpcb.com
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 1uF | framework_oscilloscope:0402_1005Metric_CAP | C10, C12, C14, C15, C17, C18, C19, C21, C22, C26, C27, C29, C30, C31, C32, C33 +8 |
| 11 | 10uF | framework_oscilloscope:0603_1608Metric_CAP | C3, C4, C5, C6, C35, C36, C37, C38, C41, C42, C45 |
| 7 | 10kR | framework_oscilloscope:0402_1005Metric | R7, R14, R15, R16, R17, R18, R19 |
| 6 | 4.7uF | framework_oscilloscope:0603_1608Metric_CAP | C9, C11, C13, C16, C20, C23 |
| 4 | 100nF | framework_oscilloscope:0402_1005Metric_CAP | C25, C47, C48, C49 |
| 4 | TestPoint | framework_oscilloscope:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP3, TP4 |
| 2 | 2k2R | framework_oscilloscope:0402_1005Metric | R3, R4 |
| 2 | MountingHole | framework_oscilloscope:MountingHole_2.2mm_M2 | H1, H2 |
| 1 | 100R | framework_oscilloscope:0402_1005Metric | R8 |
| 1 | 100pF | framework_oscilloscope:0402_1005Metric_CAP | C2 |
| 1 | 10pF | framework_oscilloscope:0402_1005Metric_CAP | C24 |
| 1 | 120R | framework_oscilloscope:0402_1005Metric | R13 |
| 1 | 12kR | framework_oscilloscope:0402_1005Metric | R2 |
| 1 | 1kR | framework_oscilloscope:0402_1005Metric | R9 |
| 1 | 1uH | framework_oscilloscope:1210_3225Metric | L5 |
| 1 | 20kR | framework_oscilloscope:0402_1005Metric | R6 |
| 1 | 33R | framework_oscilloscope:0402_1005Metric | R12 |
| 1 | 3k32R | framework_oscilloscope:0402_1005Metric | R11 |
| 1 | 4K12R | framework_oscilloscope:0402_1005Metric | R10 |
| 1 | 5.1k | framework_oscilloscope:0402_1005Metric | R1 |
| 1 | 90.9kR | framework_oscilloscope:0402_1005Metric | R5 |
| 1 | 93LC56BT-I_OT | framework_oscilloscope:SOT95P270X145-6N | IC10 |
| 1 | ADC08060CIMTX_NOPB | framework_oscilloscope:SOP65P640X120-24N | IC3 |
| 1 | ASDM1-12.000MHZ-LC-T | framework_oscilloscope:XTAL_ASDM1-12.000MHZ-LC-T | Y2 |
| 1 | BAV199T-7-F | framework_oscilloscope:SOT50P160X90-3N | D1 |
| 1 | BNC | framework_oscilloscope:MOL_0731000105 | J1 |
| 1 | ECS-TXO-2520MV-400-AN-TR | framework_oscilloscope:ECSTXO252033250ANTR | Y1 |
| 1 | FT232HL-REEL | framework_oscilloscope:QFP50P900X900X160-48N | IC1 |
| 1 | ICE40UP5K-SG48I | framework_oscilloscope:QFN50P700X700X100-49N-D | IC2 |
| 1 | LM4040C20IDBZT | framework_oscilloscope:SOT95P237X112-3N | IC9 |
| 1 | OPA356AIDBVR | framework_oscilloscope:SOT95P280X145-5N | IC7 |
| 1 | TLV77312PDBVR | framework_oscilloscope:SOT95P280X145-5N | IC8 |
| 1 | TPS62A02 | framework_oscilloscope:TI_SOT563_DRL0006A | U9 |
| 1 | USB_C_Plug_USB2.0 | framework_oscilloscope:USB_C_Plug_Molex_105444 | P1 |
| 1 | ~ | amemb-Symbol:NextPCB | LOGO1 |
It measures 26 × 44 mm and has 4 copper layers, 0.8 mm thick.
87 parts, built around the ICE40UP5K-SG48I, FT232HL-REEL, TPS62A02DRL and LM4040C20IDBZT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jlcjak/frameoscope repository on GitHub, at the commit this page was made from: the board is framework_oscilloscope.kicad_pcb and its schematic framework_oscilloscope.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jlcjak before reusing the design.
usunwshineu/Low_Power_FPGA_PCB
A custom low-power FPGA development board based on the Lattice iCE40UP5K FPGA. The board was designed to provide FPGA processing capabilities together with power monitoring and common communication interfaces.
nguyenmihn/Library-Custom-Kicad
A professional documentation template for KiCad projects inspired by industrial engineering document standards.
BetzDrive/interface-board
Power and signal conditioning board for the Betz Drive system
