
Coco2
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

This project is a custom-designed printed circuit board (PCB) developed as an educational tool to help students practice and develop through-hole device (THD) soldering skills.
TVZSolderingPracticeKit is an open-source printed circuit board by jkordek1, from the jkordek1/TVZSolderingPracticeKit repository on GitHub. It is a 2-layer board of 100 × 100 mm with 51 parts on 70 nets, routed with 158 tracks and 0 vias.
It is built around the NE555P. Its parts include 15 resistors, 10 switches, 5 diodes, 5 connectors and 2 capacitors.
This project is a custom-designed printed circuit board (PCB) developed as an educational tool to help students practice and develop through-hole device (THD) soldering skills. The board integrates simple but functional electronic circuits, centered around the NE555 timer IC, to provide hands-on learning in both soldering and basic circuit operation.
Powered with 9V battery via barrel jack and adapter.
NE555 Piano Buzzer Circuit:
Charge/Discharge with LED Indicators:
Dummy Passive Component Sections:
High-Current Trace Design:
Design considerations:
For PCB assembly, use the Fabrication.html file, which includes an easy-to-use Bill of Materials (BOM) with checkmarks. This file can be opened in any web browser.
| Reference | Value | Qty | TME Part Number |
|---|---|---|---|
| BZ1 | LD-BZEN-1205 | 1 | LD-BZEN-1205 |
| C1 | 100n | 1 | C320C104K5R5TA7317 |
| C2 | 470u / 50V | 1 | EEUFR1E471 |
| D1 | SR150-DC | 1 | SR150-DC |
| D2 | RED | 1 | 1383-2SURD/S530-A3 |
| D3 | YELLOW | 1 | 1383UYD/S530-A3 |
| D4 | GREEN | 1 | 1383SYGD/S530-E2 |
| D5 | WHITE | 1 | INL-5AW30 |
| J1 | Barrel Jack | 1 | DCJ250-10-A-K1-K |
| J2 | Conn_01x05_Pin | 1 | PH1RB-40-UA |
| J3 | Conn_01x05_Socket | 1 | ZL262-5SG |
| J4,J5 | Conn_01x03_Pin | 2 | ZL201-03G |
| J6 | JUMPER-H/R | 1 | JUMPER-H/R |
| J7 | JUMPER-H/B | 1 | JUMPER-H/B |
| R1 | 1k5 | 1 | 1/4W1.5K |
| R2 | 1k3 | 1 | 1/4W1.3K |
| R3 | 620 | 1 | 1/4W620R |
| R4 | 1k1 | 1 | 1/4W1.1K |
| R5,R9 | 1k | 2 | 1/4W1.0K |
| R6 | 910 | 1 | 1/4W910R |
| R7 | 390 | 1 | CF1/4W-390R |
| R8 | 6k2 | 1 | 1/4W6.2K |
| R10 | 4k7 | 1 | 1/4W4.7K |
| R11,R15 | 2k2 | 2 | 1/4W2.2K |
| R12,R13,R14 | 2k2 | 3 | 1/4W2.2K |
| RV1 | 10k | 1 | RK09K1130AH1 |
| SW1,SW2,SW3,SW4,SW5,SW6,SW7,SW8 | SW_Push | 8 | TACT-64K-F |
| SW10 | POWER | 1 | OS102011MS2QN1 |
| SW11 | C/D | 1 | OS102011MS2QN1 |
| U1 | NE555P | 1 | NE555P |
| U2 | ~ | 1 | ICVT-8P |
| U3 | ~ | 1 | BAT-6F22L/U-SH |
| U4,U5,U6,U7 | ~ | 4 | B2.5X5/BN2724 |
| U8,U9,U10,U11 | ~ | 4 | B3/BN116 |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 2k2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R12, R13, R14 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R9 |
| 2 | 2k2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11, R15 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4, J5 |
| 2 | TestPoint | Footprint:Wire | TP1, TP2 |
| 1 | 100n | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | 10k | Footprint:RK09K1130AH1 | RV1 |
| 1 | 1k1 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 1k3 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 1k5 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 390 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 470u / 50V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C2 |
| 1 | 4k7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10 |
| 1 | 620 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 6k2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 910 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | Barrel Jack | Footprint:DCJ250-10-A-K1-K | J1 |
| 1 | C/D | Footprint:OS102011MS2QN1 | SW11 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J2 |
| 1 | Conn_01x05_Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J3 |
| 1 | GREEN | LED_THT:LED_D5.0mm | D4 |
| 1 | LD-BZEN-1205 | Footprint:LD-BZEN-1205 | BZ1 |
| 1 | LOGO | Footprint:9V | G*** |
| 1 | LOGO | Footprint:soldering-17,5-fab | G*** |
| 1 | LOGO | Footprint:piano-silk | G*** |
| 1 | LOGO | Footprint:TVZ-15mm | G*** |
| 1 | LOGO | Footprint:logo | G*** |
| 1 | NE555P | Footprint:DIP-8_W7.62mm-socket | U1 |
| 1 | POWER | Footprint:OS102011MS2QN1 | SW10 |
| 1 | RED | LED_THT:LED_D5.0mm | D2 |
| 1 | SR150-DC | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | WHITE | LED_THT:LED_D5.0mm | D5 |
| 1 | YELLOW | LED_THT:LED_D5.0mm | D3 |

baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.

DarcyJProjects/touchtone555
An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus



benjiaomodular/SynthCard
I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

hackup/C128Diag
Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
51 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jkordek1/TVZSolderingPracticeKit repository on GitHub, at the commit this page was made from: the board is KiCAD Files/TVZSolderingPracticeKit.kicad_pcb and its schematic KiCAD Files/TVZSolderingPracticeKit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jkordek1 before reusing the design.