

Usb webcam interface
Hardware development for a six wheel mobile robot
- Size
- 26.7 × 21.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 7
- Pads
- 14
- Tracks, vias
- 11, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Jul 2018
- Updated
- 13 Jun 2020
Overview
Usb webcam interface is an open-source printed circuit board by jkleiber, from the jkleiber/six-wheel-robot repository on GitHub. It is a 2-layer board of 26.7 × 21.6 mm with 3 parts on 7 nets, routed with 11 tracks and 0 vias.
It is built around the UE27AC54100 and M20-9990246. It belongs with the robots and motor control and interfaces and adapters boards of this library.
Main components
2README
README.mdsix-wheel-robot
Hardware development for a six wheel mobile robot
Folders
- Electrical
- Contains some schematics for future electrical designs. Currently a very early work-in-progress.
- Mechanical
- Full 3D CAD model of the robot using Autodesk Inventor
Pictures

Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | UE27AC54100 | digikey-footprints:USB_A_Female_UE27AC54100 | USB_DEVICE, USB_RECEIVER |
| 1 | M20-9990246 | digikey-footprints:PinHeader_1x2_P2.54mm | POWER_PINS |
Similar boards
- 2 layers34.3 × 36.6 mm

- 4 layers109.2 × 47 mm

Arty a7-expansion
antmicro/arty-expansion-board
IO expansion board compatible with Digilent Arty A7
125 parts14Apache-2.0 - 2 layers21.7 × 10 mm

BCR Breakout
bkw777/BCR_Breakout
Adapter to get 5vdc from the BCR port on TRS-80 Model 100 and similar computers, and provide it on a standard usb port.
2 parts6CC-BY-SA-4.0 - 4 layers156.2 × 76.2 mm

- 2 layers

- 2 layers30 × 32 mm

- 2 layers27.8 × 25.3 mm

Usb vertical splitter
peteEH/USB-vertical-splitter-model3
Vertical USB Splitter - side firing receptacles
8 parts - 2 layers89 × 58 mm

Bm4.routed
aspdac-submission-pcb-layout/PCB-Layout-Framework
This repository has been prepared from the original. Some care has been taken to remove the names of the authors.
63 parts7BSD-3-Clause
Questions
How big is the Usb webcam interface PCB?
It measures 26.7 × 21.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Usb webcam interface use?
3 parts, built around the UE27AC54100 and M20-9990246. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Usb webcam interface KiCad files?
From the jkleiber/six-wheel-robot repository on GitHub, at the commit this page was made from: the board is electrical/usb-webcam-interface/usb-webcam-interface.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Usb webcam interface design in my own project?
Its repository states no licence, so its author keeps all rights: ask jkleiber before reusing the design.