Skip to the content
4 layers22.9 × 48.3 mmIce40hx8k bg121, the printed circuit board in 3D

Ice40hx8k bg121

jkiv/kicad-breakouts5

This project contains various breadboard-compatible breakouts for testing and educational purposes.

Size
22.9 × 48.3 mm
Copper layers
4
Thickness
1.6 mm
Parts
55
Nets
118
Pads
331
Tracks, vias
5,843, 142
Pours
8
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
6 Dec 2019
Updated
22 Aug 2021

Overview

Ice40hx8k bg121 is an open-source printed circuit board by jkiv, from the jkiv/kicad-breakouts repository on GitHub. It is a 4-layer board of 22.9 × 48.3 mm with 55 parts on 118 nets, routed with 5,843 tracks and 142 vias.

It is built around the LE25U20AMB-AH and B3U-1000P. Its parts include 21 capacitors, 14 resistors, 8 diodes, 5 ICs and 4 connectors. It belongs with the interfaces and adapters boards and the FPGA and CPLD boards of this library.

Main components

2

README

boards/ice40hx8k-bg121/README.md

ice40hx8k-bg121 Breakout Board

About

This is a breadboardable breakout board for a Lattice iCE40HX8K FPGA.

  • Four IO banks with 32 exposed IOs
    • 12 + 4 breadboardable IO
    • 8 + 8 IO via 2.54mm headers
    • Eight on-board LEDs (Bank D)
  • Settable VIO for IO Banks A, B, and D.
  • 12-pin PMOD compatible pinout for IO banks B and D.
  • 6-pin PMOD compatible pinout for IO bank C.
  • On-board 2Mbit flash memory.
  • On-board 12MHz clock source.
  • On-board reset button.

This board does not contain programming circuitry. The ft2232h-ice40 breakout is intended to provide the programming circuitry for this board.

Profile image of the ice40hx8k-bg121 breakout board

Rationale

This board began with the intent to provide a breadboardable FPGA for educational purposes.

Parts

55
QtyValueFootprintReferences
150.1uCapacitor_SMD:C_0603_1608MetricC5, C6, C7, C8, C10, C11, C12, C13, C15, C16, C17, C18, C19, C20, C21
8220RResistor_SMD:R_0805_2012MetricR3, R4, R5, R6, R7, R8, R9, R10
44.7uFCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C4
2100RResistor_SMD:R_0805_2012MetricR11, R13
210kResistor_SMD:R_0603_1608MetricR1, R2
210uCapacitor_SMD:C_0805_2012MetricC9, C14
21kResistor_SMD:R_0603_1608MetricR12, R14
2Conn_01x16Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_VerticalJ1, J2
2Conn_02x06_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_VerticalJ3, J4
1AP7361C-12Y5-13jkiv-library:SOT89-5U2
1AP7361C-33Y5-13jkiv-library:SOT89-5U1
1ASDMB-xxxMHzOscillator:Oscillator_SMD_Abracon_ASDMB-4Pin_2.5x2.0mmU5
1B3U-1000PButton_Switch_SMD:SW_SPST_B3U-1000PSW1
1CBSEL0jkiv-library:J_NO_0201_0603MetricJP2
1CBSEL1jkiv-library:J_NO_0201_0603MetricJP1
1L0LED_SMD:LED_0805_2012Metric_CastellatedD10
1L1LED_SMD:LED_0805_2012Metric_CastellatedD9
1L2LED_SMD:LED_0805_2012Metric_CastellatedD8
1L3LED_SMD:LED_0805_2012Metric_CastellatedD7
1L4LED_SMD:LED_0805_2012Metric_CastellatedD6
1L5LED_SMD:LED_0805_2012Metric_CastellatedD5
1L6LED_SMD:LED_0805_2012Metric_CastellatedD4
1L7LED_SMD:LED_0805_2012Metric_CastellatedD3
1LE25U20AMBPackage_SO:SOIC-8_5.275x5.275mm_P1.27mmU4
1iCE40HX8K-BG121(121-Ball_caBGA)Package_BGA:BGA-121_9.0x9.0mm_Layout11x11_P0.8mm_Ball0.4mm_Pad0.35mm_NSMDU3

More from jkiv/kicad-breakouts

2
  • 4 layers34 × 22.4 mmFt2232h ice40, the printed circuit board in 3D

    Ft2232h ice40

    jkiv/kicad-breakouts

    This project contains various breadboard-compatible breakouts for testing and educational purposes.

    36 parts5
  • 4 layers15.2 × 31.8 mmAtsamd21e18a, the printed circuit board in 3D

    Atsamd21e18a

    jkiv/kicad-breakouts

    This project contains various breadboard-compatible breakouts for testing and educational purposes.

    25 parts5

Similar boards

  • 2 layers208.8 × 396.9 mmFerris, the printed circuit board in 3D

    Ferris

    pierrechevalier83/ferris

    A low profile split keyboard designed to satisfy one single use case elegantly

    145 parts1.3k
  • 4 layers38 × 49 mmNDS TV OUT V1I2, the printed circuit board in 3D

    NDS TV OUT V1I2

    LNH-team/Lost-NDS-TV

    The Lost Nintendo DS Television Output, brought back to life

    48 parts488GPL-3.0
  • 8 layers110 × 90 mmLpddr4-test board, the printed circuit board in 3D

    Lpddr4-test board

    antmicro/lpddr4-test-board

    Experimental development board interfacing Xilinx Kintex-7 FPGA with LPDDR4 SDRAM

    497 parts57Apache-2.0
  • 2 layers38.1 × 38.1 mmSIM868, the printed circuit board in 3D

    SIM868

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    73 parts56Apache-2.0
  • 2 layers40.6 × 108 mmUseq1, the printed circuit board in 3D

    Useq1

    Emute-Lab-Instruments/uSEQ

    Hardware & firmware of the uSEQ Live Coding CV & Gate Sequencer

    172 parts44
  • 16 layers147.4 × 90 mmAPT KRIA FMC, the printed circuit board in 3D

    APT KRIA FMC

    ApotheoTech/Aper-Oculus

    An open-source Xilinx Kria SOM Carrier for high-speed camera design

    565 parts32GPL-3.0
  • 2 layers97.6 × 78.2 mmTired Seagull, the printed circuit board in 3D

    Tired Seagull

    klouderone/SeagullMacropad

    The Seagull Macropad is based off the Rhino Pad, that supports both MX and Choc switches. The Macropad features an aesthetic but functional diode layout, an encoder, and pads for a battery and battery switch for…

    38 parts31
  • 2 layers60 × 60 mmHighPower Mechaduino, the printed circuit board in 3D

    HighPower Mechaduino

    pointhi/HighPower-Mechaduino

    Mechaduino derivative which drives up to 10A, drawn using KiCad

    140 parts31

Questions

How big is the Ice40hx8k bg121 PCB?

It measures 22.9 × 48.3 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Ice40hx8k bg121 use?

55 parts, built around the LE25U20AMB-AH and B3U-1000P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ice40hx8k bg121 KiCad files?

From the jkiv/kicad-breakouts repository on GitHub, at the commit this page was made from: the board is boards/ice40hx8k-bg121/ice40hx8k-bg121.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ice40hx8k bg121 design in my own project?

Its repository states no licence, so its author keeps all rights: ask jkiv before reusing the design.