2 layers101.8 × 57.8 mm
Sc64v2
Polprzewodnikowy/SummerCart64
SummerCart64 - a fully open source N64 flashcart
96 parts1.2kGPL-3.0
2 layers116.3 × 191.7 mm
Ideonics 6Inch V1.0
jjyothilinga/PCB_6inchLEDSevenSegment- Size
- 116.3 × 191.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 96
- Nets
- 82
- Pads
- 192
- Tracks, vias
- 340, 0
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 5 Feb 2016
- Updated
- 5 Feb 2016
Overview
Ideonics 6Inch V1.0 is an open-source printed circuit board by jjyothilinga, from the jjyothilinga/PCB_6inchLEDSevenSegment repository on GitHub. It is a 2-layer board of 116.3 × 191.7 mm with 96 parts on 82 nets, routed with 340 tracks and 0 vias.
Its parts include 85 diodes, 2 connectors and 1 resistor.
Parts
96| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | LED_A | led_5mm_red | D1, D5, D6, D13, D14, D21, D22, D29, D30, D40, D78, D79 |
| 12 | LED_B | led_5mm_red | D2, D7, D8, D15, D16, D23, D24, D31, D32, D39, D76, D77 |
| 12 | LED_C | led_5mm_red | D3, D9, D10, D17, D18, D25, D26, D33, D34, D37, D72, D73 |
| 12 | LED_D | led_5mm_red | D4, D11, D12, D19, D20, D27, D28, D35, D36, D38, D74, D75 |
| 12 | LED_E | led_5mm_red | D41, D44, D45, D50, D51, D56, D57, D62, D63, D68, D80, D81 |
| 12 | LED_F | led_5mm_red | D42, D46, D47, D52, D53, D58, D59, D64, D65, D69, D82, D83 |
| 12 | LED_G | led_5mm_red | D43, D48, D49, D54, D55, D60, D61, D66, D67, D70, D84, D85 |
| 6 | P*** | 1pin | 1PIN, 1PIN, 1PIN, 1PIN, 1PIN, 1PIN |
| 1 | CONN_2 | mstbva_2,5/2-g-5,08 | P3 |
| 1 | CONN_8 | mstbva_2,5/8-g-5,08 | P1 |
| 1 | JMP | R5 | JMP2 |
| 1 | JMP | R6 | JMP1 |
| 1 | LED_DOT | led_10mm_red | D71 |
| 1 | R | R6 | R8 |
Similar boards
- 2 layers55 × 80 mm
Board esp32
sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.
96 parts1.1k - 2 layers100.5 × 218.3 mm
- 2 layers255.9 × 99.3 mm
Zerosprey42
beekeeb/zerosprey42
Zerosprey42 Keyboard is a wired, beginner friendly, choc hotswap, MonoBlockSplit (Unibody), column-staggered, DIY mechanical keyboard.
96 parts140 - 2 layers92.8 × 71.8 mm
USBSID Pico v1.0
LouDnl/USBSID-Pico
USBSID-Pico is a RPi Pico (RP2040/W RP2350/W) based board for interfacing one or two MOS SID chips and/or hardware SID emulators over (WEB)USB with your computer, phone, ASID supporting player or USB midi controller
96 parts125GPL-2.0 - 2 layers138.4 × 91.4 mm
STM32 MegaBlaster
AidanHockey5/STM32_VGM_Player_YM2612_SN76489
A Sega Genesis music player based off of the STM32 BluePill board and real YM2612+SN76489 sound chips.
96 parts117AGPL-3.0 - 2 layers75.1 × 66.8 mm
Froggyswadge
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
96 parts114 - 2 layers85 × 56 mm
Questions
How big is the Ideonics 6Inch V1.0 PCB?
It measures 116.3 × 191.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ideonics 6Inch V1.0 use?
96 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ideonics 6Inch V1.0 KiCad files?
From the jjyothilinga/PCB_6inchLEDSevenSegment repository on GitHub, at the commit this page was made from: the board is Ideonics_6Inch_V1.0.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ideonics 6Inch V1.0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jjyothilinga before reusing the design.