

Ece49022-shelf
PCB Design for ECE49022
- Size
- 44.2 × 53.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 81
- Nets
- 80
- Pads
- 305
- Tracks, vias
- 534, 156
- Pours
- 25
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Feb 2026
- Updated
- 16 Mar 2026
Overview
Ece49022-shelf is an open-source printed circuit board by jjagani, from the jjagani/ECE49022_hardware repository on GitHub. It is a 4-layer board of 44.2 × 53.6 mm with 81 parts on 80 nets, routed with 534 tracks and 156 vias.
It is built around the NAU7802SGI, TPS54202DDCT and W25Q128JVSIQ, with the ABM8-272-T3 among its other parts. Its parts include 32 capacitors, 21 resistors, 8 connectors, 5 ICs and 4 diodes. It belongs with the RP2350 boards of this library.
Main components
4NAU7802SGI
SOP-16-40℃~+85℃ 2 2.1mA 2.7V~5.5V 24 4.9152MHz 80Hz Auto calibration、Built-in temperature sensor、Multiplexers、Power-on reset External External、Built-in I2C Sigma-Delta Support Yes SOP-16 Analog to Digital Converters (ADC) ROHSNuvoton TechAnalog To Digital Converters (ADC)TPS54202DDCT
TSOT-23-6-40℃~+125℃@(TJ) 1 2A 4.5V~28V 45uA 500kHz 596mV~28V Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersW25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
Parts
81| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C20, C23, C24, C25, C26, C27, C28, C29, C30 |
| 4 | 0.1uF, 50V | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C5, C6, C32 |
| 4 | 100 | Resistor_SMD:R_0603_1608Metric | R12, R20, R21, R22 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric | C13, C17, C31 |
| 3 | LED | Resistor_SMD:R_0603_1608Metric | D1, D3, D4 |
| 2 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C8, C9 |
| 2 | 10K, 1% | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R4 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C14, C15 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R15, R17 |
| 2 | 22uF,25V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C11 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R18, R19 |
| 2 | 4.7u | 49022_Footprints:C_0402_1005Metric_small_pads | C18, C19 |
| 2 | 4.7u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C21, C22 |
| 2 | 47, 1% | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4, J6 |
| 2 | Conn_02x03_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J5, J8 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1, SW2 |
| 1 | 0.1uF, 16V | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 100k, 1% | Capacitor_SMD:C_0402_1005Metric | R9 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C16 |
| 1 | 105k | Capacitor_SMD:C_0402_1005Metric | R7 |
| 1 | 13.3k, 1% | Capacitor_SMD:C_0402_1005Metric | R10 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R14 |
| 1 | 1uF, 10V | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric | C7 |
| 1 | 3.3u | 49022_Footprints:L_pol_2016 | L3 |
| 1 | 33 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R16 |
| 1 | 49.9, 1% | Capacitor_SMD:C_0402_1005Metric | R8 |
| 1 | 510K | Capacitor_SMD:C_0402_1005Metric | R6 |
| 1 | 680pF, 50V | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1 |
| 1 | 75pF | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x16_Pin | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J2 |
| 1 | DNF | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | D_Schottky | 49022_Footprints:SMFDO-219AB_VIS-L | D2 |
| 1 | Jumper_3_Bridged12 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | MSS1048T-563ML | 49022_Footprints:IND_MSS1048 | L2 |
| 1 | NAU7802 | 49022_Footprints:SOI16_NAU7802SGI_NUV-M | IC1 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | RP2350_60QFN | 49022_Footprints:RP2350-QFN-60-1EP_7x7_P0.4mm_EP3.4x3.4mm_ThermalVias | U5 |
| 1 | R_Potentiometer_US | 49022_Footprints:RES_C01R00 | RV1 |
| 1 | TPS54202DDCT | 49022_Footprints:TPS54202 | U2 |
| 1 | USB_B_Micro | 49022_Footprints:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal_modified | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U3 |
More from jjagani/ECE49022_hardware
1- 4 layers60.2 × 52.3 mm

Similar boards
- 2 layers40 × 65 mm

- 4 layers55 × 100.5 mm

OSS Radio Hardware Design
Arkos-Engineering/HT-15_hardware
We can split this out into separate repos later, right now its very convenient to have everything here.
256 parts72 - 2 layers75 × 40 mm

PicoTop Board Rev2
7west/PicoTop
A very basic computer & OS based on the RP2350 microcontroller
86 parts66 - 4 layers50.5 × 29.5 mm

Colobus hardware
tihmstar/colobus_hardware
RP2040 based iPhone (lightning) UART cable, that actually works (hardware)
57 parts39CERN-OHL-S-2.0 - 4 layers277.2 × 107.5 mm

Katia
ikajdan/katia
A split keyboard with 6 by 3 column staggered keys and 3 thumb keys, based on the Crkbrd design
230 parts33CERN-OHL-P-2.0 - 4 layers51.8 × 20 mm

Sample target
alvarop/swd2usbc
Have you ever wanted to debug your device over USB-C? Sometimes there's not enough room for a JTAG/SWD connector, or even Tag-Connect pads!
57 parts29CC0-1.0 - 2 layers98 × 54.5 mm

Pico2 dual12bitadc
Sev5000/RP2350B_DualADC_DualPCM
A PCB to neatly package a rp2350b with two 12bit high speed adc and four channel audio input for use with hsdaoh
76 parts23 - 4 layers61.8 × 79.6 mm

Questions
How big is the Ece49022-shelf PCB?
It measures 44.2 × 53.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Ece49022-shelf use?
81 parts, built around the NAU7802SGI, TPS54202DDCT, W25Q128JVSIQ and ABM8-272-T3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ece49022-shelf KiCad files?
From the jjagani/ECE49022_hardware repository on GitHub, at the commit this page was made from: the board is pcb/ece49022-shelf/ece49022-shelf.kicad_pcb and its schematic pcb/ece49022-interface/buzzerdriver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ece49022-shelf design in my own project?
Its repository states no licence, so its author keeps all rights: ask jjagani before reusing the design.