Skip to the content
4 layers50.5 × 29.5 mmColobus hardware, the printed circuit board in 3D

RP2040 based iPhone (lightning) UART cable, that actually works (hardware)

Size
50.5 × 29.5 mm
Copper layers
4
Thickness
1.6 mm
Parts
57
Nets
83
Pads
272
Tracks, vias
761, 127
Pours
5
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
10 Jan 2025
Updated
22 Aug 2026

Overview

Colobus hardware is an open-source printed circuit board by tihmstar, from the tihmstar/colobus_hardware repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 4-layer board of 50.5 × 29.5 mm with 57 parts on 83 nets, routed with 761 tracks and 127 vias.

It is built around the FSUSB63UMX, W25Q128JVSIQ and USB2512B/M2, with the ABM8-272-T3 and ABM8G-24.000MHZ-18-D2Y-T among its other parts. Its parts include 20 capacitors, 14 resistors, 5 ICs, 3 diodes and 3 connectors. It belongs with the RP2350 boards of this library.

Main components

5

Parts

57
QtyValueFootprintReferences
9100nFCapacitor_SMD:C_0402_1005MetricC10, C15, C16, C17, C18, C19, C20, C21, C22
410kResistor_SMD:R_0402_1005MetricR9, R10, R16, R17
415pFCapacitor_SMD:C_0402_1005MetricC2, C3, C6, C7
44.7uFCapacitor_SMD:C_0402_1005MetricC8, C9, C11, C14
4MountingHoleMountingHole:MountingHole_2.1mmH1, H2, H3, H4
31kResistor_SMD:R_0402_1005MetricR1, R2, R3
3470Resistor_SMD:R_0402_1005MetricR11, R12, R13
3PTH_12x12mm_h8.0mmButton_Switch_THT:SW_PUSH_6mmButton1, Button2, Button3
21uFCapacitor_SMD:C_0402_1005MetricC23, C24
25.1kResistor_SMD:R_0402_1005MetricR4, R5
10.1uFCapacitor_SMD:C_0402_1005MetricC1
112kResistor_SMD:R_0402_1005MetricR15
13.3uHeasyeda2kicad:IND-SMD_L2.0-W1.6_AOTA-B201610S3R3-101-TL1
133Resistor_SMD:R_0402_1005MetricR8
1ABM8-272-T3Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mmY3
1ABM8G-24.000MHZ-18-D2Y-TCrystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mmY2
1BOOTSELButton_Switch_SMD:SW_SPST_PTS810SW1
1FSUSB63UMXeasyeda2kicad:UMLP-12_L1.8-W1.8-P0.40U5
1LED1LED_THT:LED_D3.0mmD4
1LED2LED_THT:LED_D3.0mmD3
1LED3LED_THT:LED_D3.0mmD2
1LOGOLOGOG***
1LightningConnector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalJ3
1RP2350_60QFNPackage_DFN_QFN:QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mmU1
1SWDConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ1
1TLV77733PDBVR_C54110218easyeda2kicad:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BRU3
1USB2512B/M2easyeda2kicad:UQFN-36_L6.0-W6.0-P0.50-BL-EP3.7U6
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01AJ2
1W25Q128JVSeasyeda2kicad:SOIC-8_L5.3-W5.3-P1.27-LS8.0-BLU2

Similar boards

  • 8 layers22.3 × 77.5 mmTinker mantis, the printed circuit board in 3D

    Tinker mantis

    Tinkerbug-Robotics/TinkerRocket

    Model rocket flight computer, ground station, iOS app, and simulation

    279 parts1GPL-3.0
  • 4 layers91 × 53.1 mmNff pcb, the printed circuit board in 3D

    Nff pcb

    o7-machinehum/flipper-blackhat

    Linux based WiFi pentesting device for the Flipper Zero.

    184 parts300
  • 6 layers100 × 70 mmSa800u baseboard hw, the printed circuit board in 3D

    Sa800u baseboard hw

    antmicro/snapdragon-845-baseboard

    https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/

    616 parts70Apache-2.0
  • 4 layers58 × 18 mmUpm, the printed circuit board in 3D

    Upm

    jonasblixt/upm

    USB Power monitor

    72 parts46
  • 4 layers39.5 × 96.3 mmJetson orin baseboard storage expansion, the printed circuit board in 3D

    Jetson orin baseboard storage expansion

    antmicro/job-storage-expansion

    This project contains open hardware design files for an expansion board compatible with Antmicro's Jetson Orin Baseboard.

    110 parts4Apache-2.0
  • 6 layers85 × 85 mmController Board, the printed circuit board in 3D

    Controller Board

    MichalVarsanyi/VoxLink

    VoxLink is a high-speed solution that allows interfacing of up to 100 sensors using a single high-speed host device.

    298 parts1MIT
  • 2 layers349 × 159 mmKeyboard 80pct, the printed circuit board in 3D

    Keyboard 80pct

    PetrouilFan/ergon80

    80% mechanical keyboard PCB: ESP32-S3, Kailh Choc V2, per-key SK6812 RGB, OLED, RTC, USB hub

    297 parts1
  • 4 layers49.2 × 28 mmAis usbc, the printed circuit board in 3D

    Ais usbc

    xenbedded/pixel-c-support

    Support hardware and software for running custom code on the Google Pixel C.

    61 parts

Questions

How big is the Colobus hardware PCB?

It measures 50.5 × 29.5 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Colobus hardware use?

57 parts, built around the FSUSB63UMX, W25Q128JVSIQ, USB2512B/M2 and ABM8-272-T3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Colobus hardware KiCad files?

From the tihmstar/colobus_hardware repository on GitHub, at the commit this page was made from: the board is colobus_hardware.kicad_pcb and its schematic colobus_hardware.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Colobus hardware design in my own project?

Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).