2 layers91.4 × 71.1 mm
Pico w rover
NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover
20 parts143MIT
2 layers23 × 38.5 mm
KiCAD Design files for the PIC16F+NRF24E wireless nodes for the vLabtool
- Size
- 23 × 38.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 23
- Pads
- 65
- Tracks, vias
- 215, 9
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 24 Aug 2015
- Updated
- 24 Aug 2015
Overview
Adc24 is an open-source printed circuit board by jithinbp, from the jithinbp/vLabtool-wirelessNodes repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 23 × 38.5 mm with 13 parts on 23 nets, routed with 215 tracks and 9 vias.
It is built around the PIC16F1618-I/P and NRF24L01. Its parts include 4 connectors, 2 capacitors, 2 resistors, 2 ICs and 1 diode. It belongs with the PIC boards of this library.
Main components
2
PIC16F1618-I/P
PDIP-20-40℃~+85℃ 10bit 18 2.3V~5.5V 32MHz 512Byte 7KB 8 Bit 8bit Built-in FLASH PIC PDIP-20 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
NRF24L01
QFN-20-EP(4x4)-40℃~+85℃ -85dBm 0dBm 1.9V~3.6V 2.4GHz 2Mbps CRC check function、Automatic response function、Automatic retransmission function SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSNordic SemiconRF Transceiver ICs
README
README.mdvLabtool-wirelessNodes
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | .1u | MyLib:C_0805 | C1, C2 |
| 2 | 10K | MyLib:R_0805 | R1, R2 |
| 2 | LED | MyLib:C_0805 | PWR, STAT |
| 1 | DIODE | MyLib:Diode-SMA_Standard | D3 |
| 1 | I2C/SPI | MyLib:Pin_Header_Straight_1x10-oval | P3 |
| 1 | NRF24L01 | MyLib:NRF-8PIN | U1 |
| 1 | PIC16F1618 | MyLib:SOIC-20-W | U2 |
| 1 | POWER | MyLib:myPin_Header_Straight_1x02 | P1 |
| 1 | PROG | MyLib:PICKIT-PROG | P4 |
| 1 | gpio | MyLib:myPin_Header_Straight_1x06 | P2 |
Questions
How big is the Adc24 PCB?
It measures 23 × 38.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Adc24 use?
13 parts, built around the PIC16F1618-I/P and NRF24L01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Adc24 KiCad files?
From the jithinbp/vLabtool-wirelessNodes repository on GitHub, at the commit this page was made from: the board is adc24.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Adc24 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers92.5 × 82.8 mm
Rifle and sensors
DAlexis/caustic-lasertag-system
Caustic project is a full-featured indoor and outdoor lasertag system
268 parts16 - 2 layers38.6 × 90.3 mm
BioElectricalSensor
CGrassin/biosignals
Board for the acquisition of bio-potentials (EMG, ECG, EEG, etc.).
107 parts15MIT - 2 layers139 × 139 mm
Breeze electronics design
microdynamics-robot-quadcopter/breeze_electronics_design
This project is created and managed by EDA softwares, which contains the breeze quadcopter's component library, footprint library, schematic, printed circuit boards, etc.
107 parts13GPL-3.0 - 2 layers50 × 50 mm
- 2 layers100 × 80 mm
- 2 layers100 × 40 mm
- 2 layers66.4 × 52.5 mm
