Skip to the content
2 layers19 × 54 mmMemory card usb interface, the printed circuit board in 3D

Atari 2600/7800 memory card (compatible with Atari 2600/7800 Save Key) tools.

Size
19 × 54 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
10
Pads
43
Tracks, vias
64, 0
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
10 Nov 2022
Updated
10 Jan 2023

Overview

Memory card usb interface is an open-source printed circuit board by JiggleSoft, from the JiggleSoft/atari-2600-memory-card-tool repository on GitHub. It is a 2-layer board of 19 × 54 mm with 11 parts on 10 nets, routed with 64 tracks and 0 vias.

Its parts include 4 connectors, 3 capacitors, 3 resistors and 1 IC. It belongs with the interfaces and adapters and retro computing and games boards and the PIC boards of this library.

README

README.md

JiggleSoft's Atari 2600

Memory Card USB Interface - Hardware, Firmware, and Software.

Introduction

This repository contains the design and implementation details of a USB interface and software management tool for Atari 2600/7800 memory cards, namely the SaveKey and SaveKey+.

The aim of this project is to provide the cheapest and simplest complete management solution for Atari 2600/7800 memory cards (SaveKey) devices.

Status

I am currently awaiting delivery of Microchip PIC MCU and Microchip Serial EEPROM integrated circuits, but there is a long lead time. In the meantime work will proceed on soldering a USB Interface Tool development stripboard PCB and a savekey plus test device stripboard PCB. Then software development will continue.

Project Index

LocationDescription
memory-card-tool/hardwareUSB interface's hardware design and implementation: Schematic, PCB, Notes.
memory-card-tool/firmwareUSB interface's firmware source code.
memory-card-tool/softwareMemory Card management tool software for Linux and Windows.
savekey-plus-test-deviceSaveKey+ test device's hardware design and implementation: Schematic, PCB (stripboard), Notes.

Note: that this repository will only be updated with content as specific milestones are reached. The development is in progress and currently housed in a separate private repository.

Hardware

USB Interface Schematic

USB Interface PCB Diagram

USB Interface PCB Front

USB Interface PCB Rear

USB Interface Stripboard Development/DIY PCB Diagram

USB Interface Stripboard Development/DIY PCB Front

USB Interface Stripboard Development/DIY PCB Back

Software

USB Interface Tool Screenshot

SaveKey Plus Test Device

SaveKey Plus Test Device Schematic

SaveKey Plus Test Device Stripboard PCB Diagram

SaveKey Plus Test Device Stripboard PCB Front

SaveKey Plus Test Device Stripboard PCB Back

Licensing

Copyright (C) 2022 Justin Lane All rights reserved.

Note: A more applicable open license will be chosen in the future.

Contact Us

Please email atari2600@jigglesoft.co.uk regarding this repository.

Parts

11
QtyValueFootprintReferences
310KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R3
1100nFCapacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mmC1
11uFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC3
1470nFCapacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mmC2
1CONN_MCU_LOGConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ4
1CONN_MCU_VPPConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ3
1DB9_MaleConnector_Dsub:DSUB-9_Male_EdgeMount_P2.77mmJ2
1PIC16F1454-IPPackage_DIP:DIP-14_W7.62mm_SocketU1
1USB_BConnector_USB:USB_B_OST_USB-B1HSxx_HorizontalJ1

More from JiggleSoft/atari-2600-memory-card-tool

2
  • 2 layers116.8 × 63.5 mmSavekey plus test device, the printed circuit board in 3D

    Savekey plus test device

    JiggleSoft/atari-2600-memory-card-tool

    Atari 2600/7800 memory card (compatible with Atari 2600/7800 Save Key) tools.

    15 parts4
  • 2 layers119.4 × 40.6 mmMemory card usb interface stripboard, the printed circuit board in 3D

    Memory card usb interface stripboard

    JiggleSoft/atari-2600-memory-card-tool

    Atari 2600/7800 memory card (compatible with Atari 2600/7800 Save Key) tools.

    11 parts4

Similar boards

  • 2 layers60 × 30 mmController, the printed circuit board in 3D

    Controller

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    11 parts3kApache-2.0
  • 2 layers103 × 30.5 mmTS Front Endcap, the printed circuit board in 3D

    TS Front Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    11 parts1.3kMIT
  • 2 layers26 × 30 mmExpansion Card, the printed circuit board in 3D

    Expansion Card

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    11 parts1.1kCC-BY-4.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    11 parts1kGPL-3.0
  • 2 layers10 × 20 mm2 connector Sensor Board, the printed circuit board in 3D

    2 connector Sensor Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    11 parts915
  • 2 layersFet module, the printed circuit board in 3D

    Fet module

    ByteWelder/Decktility

    A handheld PC

    11 parts855CC-BY-SA-4.0
  • 2 layers47 × 33 mmSevensegment led display module, the printed circuit board in 3D

    Sevensegment led display module

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    11 parts803MIT
  • 2 layers42.5 × 36.8 mmDevboard, the printed circuit board in 3D

    Devboard

    basilfx/TRADFRI-Hacking

    Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.

    11 parts743CC-BY-4.0

Questions

How big is the Memory card usb interface PCB?

It measures 19 × 54 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Memory card usb interface use?

11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Memory card usb interface KiCad files?

From the JiggleSoft/atari-2600-memory-card-tool repository on GitHub, at the commit this page was made from: the board is memory-card-tool/hardware/kicad/memory-card-usb-interface/memory-card-usb-interface.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Memory card usb interface design in my own project?

Its repository states no licence, so its author keeps all rights: ask JiggleSoft before reusing the design.