Skip to the content
2 layers89.2 × 57.2 mmMeshlite, the printed circuit board in 3D

It is required to change settings using SCLManager.exe when required for new setup.

Size
89.2 × 57.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
42
Pads
54
Tracks, vias
0, 1
Routed
Not yet
KiCad
KiCad 9.0 (file 20241229)
Created
10 Apr 2023
Updated
7 Nov 2026

Overview

Meshlite is an open-source printed circuit board by jibonaronno, from the jibonaronno/documentsA repository on GitHub. It is a 2-layer board of 89.2 × 57.2 mm with 12 parts on 42 nets.

It is built around the CPC1916Y. Its parts include 5 resistors, 3 diodes, 2 connectors, 1 IC and 1 switch. It belongs with the ESP32 and RISC-V boards of this library.

Main components

1

README

README.md

PDA IEC-61850 References

  1. LU_102_A Backup
  2. LU_104_A Backup
  3. ClientProc executable with SA_Client.ini and YH.cid files Backup
  4. SclManager Backup

SA_Client.ini has following configs:

ini
LocalIp=192.168.10.105
...
...
PATH=D:/develop/MZAutomation/SAProgram/ClientProc_2017_Dev_NoTimer_Minsu/ClientProc/61850_CFG/CFG/61850/SA_CFG
SAVE_PATH =D:/develop/MZAutomation/SAProgram/ClientProc_2017_Dev_NoTimer_Minsu/ClientProc/61850_CFG/LOG/61850
ENG_PATH =D:/develop/MZAutomation/SAProgram/ClientProc_2017_Dev_NoTimer_Minsu/ClientProc/61850_CFG/DB/ied_info_gw.csv

These configurations should be changed if machine or location is changed.

It is required to change settings using SCLManager.exe when required for new setup.

NO IMAGE

Confluence Pages From PDA ACQ Operation and calculation / Integration of various current values Copy of 차단기 동작 특성 페이지 https://jlee193.atlassian.net/wiki/spaces/PDA/pages/514129921/Copy+of

Bushing Documentation Page From PDA 부싱 누설 전류 페이지 https://jlee193.atlassian.net/wiki/spaces/PDA/pages/296812597

An Initial Concept of hardware pptx file downloaded in Confluence folder 종합예방진단시스템(20210625)_HW팀.pptx 하드웨어 구성 https://jlee193.atlassian.net/wiki/spaces/PDA/pages/154042616

Parts

12
QtyValueFootprintReferences
3470EResistor_SMD:R_0603_1608MetricR3, R4, R5
3LEDLED_SMD:LED_0603_1608MetricD1, D2, D3
2Conn_02x05_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_VerticalJ3, J4
2R_SmallResistor_SMD:R_0603_1608MetricR1, R2
1CPC1916YCPC1916Y:CPC1916YK1
1MOUDLE-SEEEDUINO-XIAO-ESP32C3xiao ESP32C3_PCB:MOUDLE14P-SMD-2.54-21X17.8MMU1

More from jibonaronno/documentsA

12
  • 2 layers354.5 × 132.5 mmPanels001, the printed circuit board in 3D

    Panels001

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    308 parts4
  • 2 layers236.7 × 149.7 mmControllinoA, the printed circuit board in 3D

    ControllinoA

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    265 parts4
  • 2 layers237 × 132.5 mmPanel, the printed circuit board in 3D

    Panel

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    228 parts4
  • 4 layers30 × 72 mmESP32-P4-DevKit Rev C, the printed circuit board in 3D

    ESP32-P4-DevKit Rev C

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    164 parts4
  • 4 layers94 × 94 mmWalter feels, the printed circuit board in 3D

    Walter feels

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    153 parts4
  • 2 layersCabinate, the printed circuit board in 3D

    Cabinate

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    106 parts4
  • 4 layers24.2 × 30.9 mmWearable, the printed circuit board in 3D

    Wearable

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    97 parts4
  • 2 layersTIP122Board, the printed circuit board in 3D

    TIP122Board

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    82 parts4
  • 2 layersCabinate, the printed circuit board in 3D

    Cabinate

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    75 parts4
  • 2 layers122.5 × 174 mmSnifferA, the printed circuit board in 3D

    SnifferA

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    69 parts4
  • 2 layers166 × 160.6 mmSnifferA, the printed circuit board in 3D

    SnifferA

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    68 parts4
  • 4 layers26.1 × 32.5 mmReband, the printed circuit board in 3D

    Reband

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    51 parts4

Similar boards

  • 2 layersNrf bga, the printed circuit board in 3D

    Nrf bga

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    12 parts14kMIT
  • 2 layers66.9 × 74.5 mmDeskHop, the printed circuit board in 3D

    DeskHop

    hrvach/deskhop

    Fast Desktop Switching Device

    12 parts7.9kGPL-3.0
  • 2 layers40 × 15 mmSensors, the printed circuit board in 3D

    Sensors

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    12 parts3kApache-2.0
  • 2 layers42.7 × 56.5 mmTle6240 driver, the printed circuit board in 3D

    Tle6240 driver

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    12 parts1.2k
  • 2 layers49 × 25 mm5v boost regulator, the printed circuit board in 3D

    5v boost regulator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    12 parts915
  • 2 layers28.3 × 10.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    12 parts716GPL-3.0
  • 2 layers25.4 × 70.4 mmTpmsniffer, the printed circuit board in 3D

    Tpmsniffer

    stacksmashing/pico-tpmsniffer

    A simple, very experimental TPM sniffer for LPC bus

    12 parts696

Questions

How big is the Meshlite PCB?

It measures 89.2 × 57.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Meshlite use?

12 parts, built around the CPC1916Y. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Meshlite KiCad files?

From the jibonaronno/documentsA repository on GitHub, at the commit this page was made from: the board is uprojects/Laurent ESP Mesh/meshlite.pcb/meshlite/meshlite.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Meshlite design in my own project?

Its repository states no licence, so its author keeps all rights: ask jibonaronno before reusing the design.