Skip to the content
2 layersLogger, the printed circuit board in 3D

It is required to change settings using SCLManager.exe when required for new setup.

Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
59
Pads
206
Tracks, vias
103, 11
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
10 Apr 2023
Updated
7 Nov 2026

Overview

Logger is an open-source printed circuit board by jibonaronno, from the jibonaronno/documentsA repository on GitHub. It is a 2-layer board with 25 parts on 59 nets, routed with 103 tracks and 11 vias.

Its parts include 16 connectors, 4 resistors and 4 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

README.md

PDA IEC-61850 References

  1. LU_102_A Backup
  2. LU_104_A Backup
  3. ClientProc executable with SA_Client.ini and YH.cid files Backup
  4. SclManager Backup

SA_Client.ini has following configs:

ini
LocalIp=192.168.10.105
...
...
PATH=D:/develop/MZAutomation/SAProgram/ClientProc_2017_Dev_NoTimer_Minsu/ClientProc/61850_CFG/CFG/61850/SA_CFG
SAVE_PATH =D:/develop/MZAutomation/SAProgram/ClientProc_2017_Dev_NoTimer_Minsu/ClientProc/61850_CFG/LOG/61850
ENG_PATH =D:/develop/MZAutomation/SAProgram/ClientProc_2017_Dev_NoTimer_Minsu/ClientProc/61850_CFG/DB/ied_info_gw.csv

These configurations should be changed if machine or location is changed.

It is required to change settings using SCLManager.exe when required for new setup.

NO IMAGE

Confluence Pages From PDA ACQ Operation and calculation / Integration of various current values Copy of 차단기 동작 특성 페이지 https://jlee193.atlassian.net/wiki/spaces/PDA/pages/514129921/Copy+of

Bushing Documentation Page From PDA 부싱 누설 전류 페이지 https://jlee193.atlassian.net/wiki/spaces/PDA/pages/296812597

An Initial Concept of hardware pptx file downloaded in Confluence folder 종합예방진단시스템(20210625)_HW팀.pptx 하드웨어 구성 https://jlee193.atlassian.net/wiki/spaces/PDA/pages/154042616

Parts

25
QtyValueFootprintReferences
15CONN_06LONGPADSConnectors:1X06_LONGPADSJ1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J12, J13, J14, J15, J16
4330EResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R3, R4
4PC817Package_DIP:DIP-4_W7.62mmU1, U2, U3, U4
1ARDUINO_MEGA_R3FULL-SparkFun-BoardsBoards:ARDUINO_MEGAB1
1Screw_Terminal_01x06TerminalBlock_RND:TerminalBlock_RND_205-00236_1x06_P5.08mm_HorizontalJ11

More from jibonaronno/documentsA

12
  • 2 layers354.5 × 132.5 mmPanels001, the printed circuit board in 3D

    Panels001

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    308 parts4
  • 2 layers236.7 × 149.7 mmControllinoA, the printed circuit board in 3D

    ControllinoA

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    265 parts4
  • 2 layers237 × 132.5 mmPanel, the printed circuit board in 3D

    Panel

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    228 parts4
  • 4 layers30 × 72 mmESP32-P4-DevKit Rev C, the printed circuit board in 3D

    ESP32-P4-DevKit Rev C

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    164 parts4
  • 4 layers94 × 94 mmWalter feels, the printed circuit board in 3D

    Walter feels

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    153 parts4
  • 2 layersCabinate, the printed circuit board in 3D

    Cabinate

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    106 parts4
  • 4 layers24.2 × 30.9 mmWearable, the printed circuit board in 3D

    Wearable

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    97 parts4
  • 2 layersTIP122Board, the printed circuit board in 3D

    TIP122Board

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    82 parts4
  • 2 layersCabinate, the printed circuit board in 3D

    Cabinate

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    75 parts4
  • 2 layers122.5 × 174 mmSnifferA, the printed circuit board in 3D

    SnifferA

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    69 parts4
  • 2 layers166 × 160.6 mmSnifferA, the printed circuit board in 3D

    SnifferA

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    68 parts4
  • 4 layers26.1 × 32.5 mmReband, the printed circuit board in 3D

    Reband

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    51 parts4

Similar boards

  • 2 layers159.5 × 30 mmType f, the printed circuit board in 3D

    Type f

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    25 parts3kApache-2.0
  • 2 layers113.5 × 95.1 mmSweep high, the printed circuit board in 3D

    Sweep high

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    25 parts2.1k
  • 2 layers58.4 × 114.3 mmPicoPedal, the printed circuit board in 3D

    PicoPedal

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    25 parts915
  • 2 layers54 × 15 mmXyp gpib, the printed circuit board in 3D

    Xyp gpib

    xyphro/UsbGpib

    Versatile, cheap and portable USB to GPIB converter (USBTMC class based)

    25 parts690MIT
  • 2 layers50 × 76 mmVoron 0, the printed circuit board in 3D

    Voron 0

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    25 parts397Apache-2.0
  • 2 layers237.5 × 102.9 mmStorage, the printed circuit board in 3D

    Storage

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    25 parts301Unlicense
  • 2 layers43.3 × 21 mmNanoS3 Carrier, the printed circuit board in 3D

    NanoS3 Carrier

    UnexpectedMaker/esp32s3

    Assorted files for my ESP32-S3 development boards

    25 parts296

Questions

What parts does the Logger use?

25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Logger KiCad files?

From the jibonaronno/documentsA repository on GitHub, at the commit this page was made from: the board is uprojects/MAMPower/EncoderPress/Logger.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Logger design in my own project?

Its repository states no licence, so its author keeps all rights: ask jibonaronno before reusing the design.