
Uno Shield ThermoPro
jhall8686/ENCE_3210_Jackson_Hall
Microprocessor Systems Projects (Code and PCB Designs)

Microprocessor Systems Projects (Code and PCB Designs)
Uno Shield FinalProject is an open-source printed circuit board by jhall8686, from the jhall8686/ENCE_3210_Jackson_Hall repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 21 parts on 43 nets, routed with 59 tracks and 0 vias.
It is built around the BME280 and TMP36GT9. Its parts include 6 resistors, 6 diodes, 6 connectors, 2 ICs and 1 capacitor.
Microprocessor Systems Project Submissions
The primary project in this repository is the ThermoPro Thermometer Probe, a clone of an actual product implemented on a PCB shield. All of the PCB docs and firmware can be found here.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 6 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4, D5, D6 |
| 1 | 0.1uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | Analog | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | BME280 | 2652:MODULE_2652 | U1 |
| 1 | Digital/PWM | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | Digital/PWM | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | MPU6050 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J7 |
| 1 | OpenLog | OpenLog:MODULE_DEV-13712 | J8 |
| 1 | Power | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | TMP36GT9 | TMP36GT9:XDCR_TMP36GT9 | U2 |

jhall8686/ENCE_3210_Jackson_Hall
Microprocessor Systems Projects (Code and PCB Designs)

nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality


New-England-Weather-Balloon-Society/Tiny4FSK
Horus Binary v2 HAB Tracker


kbx81/ClimateSprinklerController
ESP32-based climate and sprinkler controller for use with ESPHome

crnicholson/StratoSoar-MK3
StratoSoar MK3, an autonomous glider meant for high-altitudes, accessible to everyone


CCHS-Melbourne/ESPlant
Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the BME280 and TMP36GT9. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jhall8686/ENCE_3210_Jackson_Hall repository on GitHub, at the commit this page was made from: the board is KiCad Projects/Uno_Shield_FinalProject/Uno_Shield_FinalProject.kicad_pcb and its schematic KiCad Projects/Uno_Shield_FinalProject/Uno_Shield_FinalProject.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jhall8686 before reusing the design.