Skip to the content
2 layers101 × 78.3 mmSMD Eingangsplatine 16x, the printed circuit board in 3D

SMD Eingangsplatine 16x

jh2000/Cockpit-XP

Platinenlayouts für die Cockpit-XP Rennsoftware

Size
101 × 78.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
80
Nets
85
Pads
281
Tracks, vias
677, 77
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
15 May 2026
Updated
15 May 2026

Overview

SMD Eingangsplatine 16x is an open-source printed circuit board by jh2000, from the jh2000/Cockpit-XP repository on GitHub. It is a 2-layer board of 101 × 78.3 mm with 80 parts on 85 nets, routed with 677 tracks and 77 vias.

It is built around the LM339. Its parts include 50 resistors, 16 diodes, 8 capacitors, 4 ICs and 1 connector.

Main components

1

README

README.md

Cockpit-XP

Platinenlayouts für die Cockpit-XP Rennsoftware von https://wiki.cockpit-xp.de/dokuwiki/doku.php

Es handelt sich hier um von mir mit KiCAD erstellte Platinen für den Arduino Due in Verbindung mit der Software Cockpit-XP und einer entsprechenden Addon-Lizenz.

Beide Platinen lassen sich von Hand löten, die Lochrastervariante hat ein 2,54mm Rastermaß und könnte komplett auf einer entsprechenden Platine von Hand gefertigt werden. Alternativ lassen sich wie auf meinem Beispielbild die Designs aber auch bei z.B. JLCPCB fertigen und ggf. auch gleich bestücken. Die SMD-Bauteile wurden groß genug gewählt um auch von Laien von Hand gelötet werden zu können, insofern ein einfacher Lötkolben mit nicht all zu grober Spitze vorhanden ist.

Es gibt auf beiden Platinen einen Jumper (Lochraster) bzw. eine Lötbrücke (SMD) um zwischen 3,3V und 5V wechseln zu können. Es wird die 3,3V Verwendung empfohlen, da die Eingangspins des Atmel Mikroprozessors offiziell nicht 5V tolerant sind.

Technisch handelt es sich hier um eine optimierte Variante für 16 Eingänge mittels 4 Operationsverstärkern.

Die Stücklisten für das benötigte Material können via KiCAD erstellt werden.

Auch wenn alles im Rastermaß 2,54mm geplant wurde, lassen sich die Schraubbuchsen auch in der 5mm Variante benutzen, dann können 4 Verbunden werden. Auf der SMD Platine macht es keinen Unterschied, auf der Rasterplatine sind die hinteren Buchsen dann nicht durchgäng Verbunden.

Die mittlere Buchse der Rastermaßplatine hat keinen praktischen Zweck, dort liegt die Versorgungsspannung und Masse an. Diese kann also Weg bleiben.

Beide Design haben im Detail abweichende Eingangsbelegungen, welche aber jeweils auf den Platinen aufgedruckt sind.

Parts

80
QtyValueFootprintReferences
1710KResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR3, R8, R10, R19, R20, R21, R22, R31, R32, R33, R34, R43, R44, R45, R46, R57 +1
161KResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR4, R5, R6, R7, R15, R16, R17, R18, R27, R28, R29, R30, R39, R40, R41, R42
164K7Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR11, R12, R13, R14, R23, R24, R25, R26, R35, R36, R37, R38, R47, R48, R49, R50
16Screw_Terminal_01x02TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type101_RT01602HBWC_1x02_P5.08mm_HorizontalD3, D4, D7, D8, D9, D10, D16, D17, D36, D38, D40, D42, D44, D46, D48, D50
4CCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C3, C5, C7
4C_PolarizedCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2, C4, C6, C8
4LM339Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU1, U2, U3, U4
12K2Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR58
1Arduino_Due_ShieldPCM_arduino-library:Arduino_Due_ShieldA1
1Conn_01x03Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabelsJ1

More from jh2000/Cockpit-XP

1

Similar boards

  • 2 layers75 × 100 mmPhased, the printed circuit board in 3D

    Phased

    Neumi/open_echo

    Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

    77 parts530
  • 2 layers50.8 × 107.9 mmAnalog rev3, the printed circuit board in 3D

    Analog rev3

    PaulStoffregen/O_C_T41

    Ornament and Crime Optimized With Teensy 4.1

    202 parts164
  • 2 layers40 × 100 mmBack pcb, the printed circuit board in 3D

    Back pcb

    ZeroPhone/ZeroPhone-PCBs

    PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!

    118 parts148GPL-3.0
  • 2 layers98.5 × 59.8 mmNeuron, the printed circuit board in 3D

    Neuron

    giant-axon/lu.i-neuron-pcb

    Lu.i is an electronic neuron circuit mimicking and illustrating the basic dynamics of real, biological neurons. The printed circuit board (PCB) features a configurable, fully analog implementation of the leaky…

    90 parts73CERN-OHL-S-2.0
  • 2 layers156.2 × 168.9 mmLPC176x MultiFunction, the printed circuit board in 3D

    LPC176x MultiFunction

    RobertPHeller/RPi-RRCircuits

    A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

    236 parts24
  • 2 layers209.1 × 126.6 mmTH XWhatsIt, the printed circuit board in 3D

    TH XWhatsIt

    listofoptions/TH-XWhatsIt

    through hole implementation of the capsense controllers by XWhatsIt

    60 parts21
  • 2 layers177.9 × 187.4 mmAudio board 0033 rev.a, the printed circuit board in 3D

    Audio board 0033 rev.a

    palazzol/CyberamicControlCenter

    Repo for docs and info about the Cyberamic Control Center

    105 parts16
  • 2 layers100 × 35 mmTwo comparator effect, the printed circuit board in 3D

    Two comparator effect

    cyberboy666/two_comparator_effect

    analog video posterisation effect - adapted from a rob schafer design

    34 parts15GPL-3.0

Questions

How big is the SMD Eingangsplatine 16x PCB?

It measures 101 × 78.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SMD Eingangsplatine 16x use?

80 parts, built around the LM339. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SMD Eingangsplatine 16x KiCad files?

From the jh2000/Cockpit-XP repository on GitHub, at the commit this page was made from: the board is SMD-Eingangsplatine 16x/pcb.kicad_pcb and its schematic Lochraster-Eingangsplatine 16x/pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SMD Eingangsplatine 16x design in my own project?

Its repository states no licence, so its author keeps all rights: ask jh2000 before reusing the design.