2 layers152.4 × 101.6 mm
8088-FE2010A SBC
skiselev/micro_8088
Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset
72 parts412GPL-3.0
2 layers41 × 39 mm
Bubblebot
jgresula/bubblebotThis repository contains firmware, FreeCAD and KiCad files for my bubble blowing robot.
- Size
- 41 × 39 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 13
- Pads
- 56
- Tracks, vias
- 89, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Aug 2015
- Updated
- 22 Apr 2020
Overview
Bubblebot is an open-source printed circuit board by jgresula, from the jgresula/bubblebot repository on GitHub. It is a 2-layer board of 41 × 39 mm with 22 parts on 13 nets, routed with 89 tracks and 0 vias.
It is built around the PN2222A. Its parts include 5 capacitors, 3 resistors, 3 ICs, 2 diodes and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdBubbleBot
This repository contains firmware, FreeCAD and KiCad files for my bubble blowing robot.
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Mounting_Holes:MountingHole_3mm | , , | |
| 3 | 100nF | Capacitors_ThroughHole:C_Disc_D3_P2.5 | C3, C4, C6 |
| 2 | 10k | Socket_Strips:Socket_Strip_Straight_1x03 | RV1, RV2 |
| 1 | 10 | Resistors_ThroughHole:Resistor_Vertical_RM5mm | R3 |
| 1 | 100uF | Capacitors_ThroughHole:C_Radial_D5_L11_P2 | C1 |
| 1 | 180 | Resistors_ThroughHole:Resistor_Vertical_RM5mm | R1 |
| 1 | 1k8 | Resistors_ThroughHole:Resistor_Vertical_RM5mm | R2 |
| 1 | 470uF | Capacitors_ThroughHole:C_Radial_D8_L13_P3.8 | C2 |
| 1 | ATTINY85-P | Housings_DIP:DIP-8_W7.62mm | IC1 |
| 1 | AVR-ISP-6 | Pin_Headers:Pin_Header_Straight_2x03 | CON1 |
| 1 | BAT | Socket_Strips:Socket_Strip_Straight_1x02 | BAT1 |
| 1 | DC_MOTOR | Socket_Strips:Socket_Strip_Straight_1x02 | M1 |
| 1 | D_Schottky | Diodes_ThroughHole:Diode_DO-41_SOD81_Horizontal_RM10 | D2 |
| 1 | LED | LEDs:LED-3MM | D1 |
| 1 | PN2222A | Housings_TO-92:TO-92_Molded_Narrow | Q1 |
| 1 | POLOLU_REG | Socket_Strips:Socket_Strip_Straight_1x03 | U1 |
| 1 | SERVO | Socket_Strips:Socket_Strip_Straight_1x03 | U2 |
Questions
How big is the Bubblebot PCB?
It measures 41 × 39 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bubblebot use?
22 parts, built around the PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bubblebot KiCad files?
From the jgresula/bubblebot repository on GitHub, at the commit this page was made from: the board is pcb/bubblebot.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bubblebot design in my own project?
Its repository states no licence, so its author keeps all rights: ask jgresula before reusing the design.
Similar boards
- 2 layers33.7 × 66 mm
Smartbell
Staacks/there.oughta.be
Projects featured on my blog at https://there.oughta.be
27 parts108GPL-3.0 - 4 layers100 × 100 mm
- 2 layers30.7 × 76.1 mm
Repeater v2
plusvic/simplebus2-intercom
General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.
17 parts95CC0-1.0 - 2 layers28.8 × 43.8 mm
- 2 layers23.2 × 52.1 mm
- 4 layers184.2 × 169.5 mm
- 2 layers49.5 × 30 mm
