2 layers81.7 × 62.5 mm
2 layers98.5 × 99.1 mm
Hub schematic
jgarr0/SDP-PCBs- Size
- 98.5 × 99.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 62
- Pads
- 188
- Tracks, vias
- 411, 124
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Apr 2023
- Updated
- 4 May 2023
Overview
Hub schematic is an open-source printed circuit board by jgarr0, from the jgarr0/SDP-PCBs repository on GitHub. It is a 2-layer board of 98.5 × 99.1 mm with 53 parts on 62 nets, routed with 411 tracks and 124 vias.
It is built around the ESP32-S3-WROOM-1U-N16R8, XB3-24Z8UM-J and MCP1825S-3302E/DB. Its parts include 9 capacitors, 7 resistors, 3 ICs, 3 diodes and 3 connectors. It belongs with the ESP32 boards of this library.
Main components
3
ESP32-S3-WROOM-1U-N16R8
SMD,19.2x18mm-103.5dBm -40℃~+65℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3R8 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、I2S、JTAG、USB SMD,19.2x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesXB3-24Z8UM-J
SMD-34PSMD-34P RF Modules ROHSDigiRF Modules
MCP1825S-3302E/DB
SOT-223-3-40℃~+125℃@(Tj) 1 120uA 210mV@(500mA) 3.3V 500mA 60dB@(100Hz) 6V Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Short Circuit Protection SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdSDP-PCBs
Hub and Outlet Motherboard Schematics and PCB Layouts for Smart Power Outlet System
#Hub PCB Schematic
Hub PCB Layout
Hub PCB Render
Assembled hub
Outlet PCB Schematic
Outlet PCB Layout
Outlet PCB Render
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | , , , , , , | ||
| 3 | 60 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R8, R9 |
| 3 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3 |
| 2 | 0.1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C7 |
| 2 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C5 |
| 2 | 5.1K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6 |
| 1 | 1M | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | 4.7nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9 |
| 1 | 4.7uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 8.2pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8 |
| 1 | Conn_02x03_Odd_Even | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J3 |
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J2 |
| 1 | ESP32-S3-WROOM-1U-N16R8 | SnapEDA Library:XCVR_ESP32-S3-WROOM-1U | U1 |
| 1 | G*** | kibuzzard-6423A409 | kibuzzard-6423A409 |
| 1 | G*** | kibuzzard-6423A5A2 | kibuzzard-6423A5A2 |
| 1 | G*** | kibuzzard-6423A5AD | kibuzzard-6423A5AD |
| 1 | G*** | kibuzzard-64223022 | kibuzzard-64223022 |
| 1 | G*** | kibuzzard-6423A4C5 | kibuzzard-6423A4C5 |
| 1 | G*** | kibuzzard-64223004 | kibuzzard-64223004 |
| 1 | G*** | kibuzzard-6423A5A6 | kibuzzard-6423A5A6 |
| 1 | G*** | kibuzzard-6422303A | kibuzzard-6422303A |
| 1 | G*** | kibuzzard-6423A486 | kibuzzard-6423A486 |
| 1 | G*** | kibuzzard-6423A4A2 | kibuzzard-6423A4A2 |
| 1 | G*** | kibuzzard-6423A4B6 | kibuzzard-6423A4B6 |
| 1 | G*** | kibuzzard-6423A4AE | kibuzzard-6423A4AE |
| 1 | G*** | kibuzzard-6423A4BC | kibuzzard-6423A4BC |
| 1 | LOGO | zlogo | G*** |
| 1 | MCP1825S-3302E/DB | SnapEDA Library:SOT230P700X180-4N | U2 |
| 1 | USB4125-GF-A-0190_REVA2 | SnapEDA Library:GCT_USB4125-GF-A-0190_REVA2 | J1 |
| 1 | XB3-24Z8UM-J | SnapEDA Library:XCVR_XB3-24Z8UM-J | U3 |
The 46 most common of 53 parts.
More from jgarr0/SDP-PCBs
1Similar boards
- 4 layers70 × 40 mm
Tagger
northernpaws/lasernet-rev1
Retrofit Zigbee PCBs, firmware, and a custom Linux-based game controller for the lasertag.net Falcon system.
80 parts - 2 layers53.2 × 35.3 mm
- 4 layers71.7 × 62.4 mm
- 2 layers103 × 215 mm
Riv cosmici 3ch
bagnasconicolo/glacier-elettronica
Front-end di lettura per un rivelatore di muoni cosmici basato su SiPM + scintillatore: amplificatore veloce, discriminatore a soglia regolabile, generazione del bias del SiPM, uscita TTL e uscita 3,3 V per Raspberry Pi.
203 parts - 2 layers50.3 × 91.2 mm
- 2 layers99 × 110.5 mm
7001-ventilator mainboard
OperationAIR/electronics
Electronics and Firmware for OperationAir ventilator
167 partsApache-2.0 - 2 layers142 × 166.9 mm
- 4 layers65 × 64.6 mm
Questions
How big is the Hub schematic PCB?
It measures 98.5 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hub schematic use?
53 parts, built around the ESP32-S3-WROOM-1U-N16R8, XB3-24Z8UM-J and MCP1825S-3302E/DB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hub schematic KiCad files?
From the jgarr0/SDP-PCBs repository on GitHub, at the commit this page was made from: the board is hub/hub_schematic.kicad_pcb and its schematic Outlet/outlet_schematic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hub schematic design in my own project?
Its repository states no licence, so its author keeps all rights: ask jgarr0 before reusing the design.